When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I cannot say enough about this supplier. I originally ordered the complete set, splitter ZR1 spoiler and the side skirts. While the splitter never fit correctly, I never said anything and ordered a carbon fiber one for around $400. Took over 7 weeks to get it. I had the skirts on as well as the spoiler for some time and then pulled a bone head mistake and forgot I was parked next to a island and pulled out and kit the cure breaking the right side skirt. I went on line the next day and saw that EOS had side skirts for the base in the carbon fiber look. Order a new set and had then in less then 7 days. A perfect fit and now they match the front splitter. It would be nice if they came out with the ZR1 spoiler in the same finish. Foe now I am going to try and wrap it with the 3m carbon fiber look vinyl.
Not the best picture, because the car is in the garage covered but when I can I will get a few more pictures from different angles.
Final thought, if anyone is concerned about the products, because they are cheaper, if you drive the car daily, these are the way to go. They fit great, and if you do break then you can replace then and still be under what others charge for a set.
Last edited by ExtremeOnlineStore; 01-15-2019 at 02:41 PM.
So I received the Front Splitter in the mail yesterday from EOS. Still waiting on the Side Skirts (got the side skirts in carbon fiber). I just got done installing the Splitter. Looks pretty good for being ABS hydrodipped carbon fiber. I went with this style splitter because I rub getting in and out of my driveway, hopefully I can still get in and out.....��. There are 13 bolts on the stock splitter, 9 of those holes line up with the new one. You have to add 4 holes. These are on either side of the openings on the new splitter. I also used 3M double sided tape. If you put all the stocks screws in just a couple of threads you end up with about a 1/4 inch opening. If you take a small pick you can peel the top off the 3M tape before you tighten the bolts. This way the tape doesn't stick before its lined up. For the 4 added holes I used the screws they supplied. If these dont hold up I will just drill out the holes and use GM plastic push clips. I don't like drilling holes but at least if I put the old splitter back.on you would never see them. Fits pretty dam good too. Here are some pics.
3M tape I used
The screw on the left is what they supply. The clip on the right is i will use if the screws don't hold up
New vs old
New vs old
After i put the 3M tape on
Originally Posted by C6Z06Silverbullet
Well I made it out of the driveway and back in without hitting Here's some pics on the ground.
Last edited by ExtremeOnlineStore; 07-15-2019 at 01:12 PM.
I purchased these side skirts from this vendor and couldn’t be happier. excellent fit/finish/quality! fast shipping to Ohio, over the top packing too. will do business w/them again...
Last edited by ExtremeOnlineStore; 02-06-2019 at 02:06 PM.
I have the Extremem Online Store stuff too, I baby it and it's still taken some damage, I think the worst of it was someone that stepped on it. So no reason to spend big bucks when these fit perfectly and look outstanding. My next one I will ne covering with clear bra though.
Last edited by ExtremeOnlineStore; 12-14-2018 at 03:07 PM.
I just want to post here and let everyone know what a great experience I had with ExtremeOnlineStore
When I got my first front CF splitter, a part of the weave was not straight. I contacted them and they sent me a shipping label and took care of it right away. The replacement is perfect. I'll post some pics when I get it installed.
Selling a set of the Wide ZR1 carbon fiber side skirts and rear flaps. Will fit all standard wide body Z06s and ZR1s
$800 local pick up preferred will ship on buyers dime
also have a ZR1 splitter too that has some scuffs I’ll throw in for another $100
I have both their carbon fiber splitter and side skirts. The pieces are decent and fit very well for the price. They are a bit flimsy/fragile. In order for them to meet my requirements I added fiberglass filler to the under side of all pieces to give them more strength. While CF is suppose to be light weight, in my opinion, they needed a bit more mass to make them stronger. Overall, they turned out looking pretty good and I am VERY picky. The hardest thing to overcome is drilling holes in your rocker panels. However, that's what GM did so I went for it. GM also used black pop rivets for installation. The skirts come with screws and if tightened too much they simply won't grip. I ended up using a different screw with a coarser thread because of that issue. The only reason I didn't use pop rivets is that I wanted to easily replace one if it got damaged and drilling out pop rivets is some what of a PITA. Hope this helps.
Can anyone help me find this carbon fiber? I cannot locate anywhere. Bought a used 2012 GS 2 years ago and would like to replace. I cannot locate anyone who sells this.
08-30-2018, 01:19 AM
ExtremeOnlineStore | C6 Exterior Parts & Accessories - Best Price | Free Shipping
Here's some pics on the ground.
