Rear Wheel Hp Vs Flywheel Hp
04-19-2006, 03:05 PM
#1
Drifting
Thread Starter
Rear Wheel Hp Vs Flywheel Hp
What is the added percentage needed to convert rear wheel HP to flywheel (crank) HP? I think it is between 15% and 18%.
Last edited by RonnieC6Z; 04-19-2006 at 03:07 PM.
04-19-2006, 03:18 PM
#2
Advanced
Member Since: Jul 2005
Location: Sydney Australia
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
04-19-2006, 03:35 PM
#3
Melting Slicks
rule of thumb is 15% and we have seen C6s avering about 340 on the dyno which is exactly 15% (assuming there is 400HP at flywheel) we know that many C5 Z06s made more than their advertised 405HP (shhhh)
Supposedly you will gain 1 or 2% of the efficiency after the car is fully broken in.
Supposedly you will gain 1 or 2% of the efficiency after the car is fully broken in.
