I Need Traction Baaaaad !!!!!!!!
#81
Burning Brakes
Thread Starter
Member Since: Jul 2005
Location: Bloomingdale Illinois
Posts: 779
Likes: 0
Received 1 Like
on
1 Post
Injector Connectors :
Chose the style to suite your injector plug
http://www.fuelairspark.com/WhatsNew...nectorkits.pdf
Racelogic is in the UK. I bought it from Woodhouse Viper, One of their distributors in the U.S.A.
.
.
.
#82
Drifting
Injector Connectors :
Chose the style to suite your injector plug
http://www.fuelairspark.com/WhatsNew...nectorkits.pdf
Racelogic is in the UK. I bought it from Woodhouse Viper, One of their distributors in the U.S.A.
.
.
.
Chose the style to suite your injector plug
http://www.fuelairspark.com/WhatsNew...nectorkits.pdf
Racelogic is in the UK. I bought it from Woodhouse Viper, One of their distributors in the U.S.A.
.
.
.
#87
Burning Brakes
Thread Starter
Member Since: Jul 2005
Location: Bloomingdale Illinois
Posts: 779
Likes: 0
Received 1 Like
on
1 Post
I'm just trying to save my *** from a wall if the tires break loose when I least expect it and also to be able to accelerate through the first few gears at WOT without feathering the throttle.
I'll be getting back to the install soon enough.
.
#88
Vito I have a convert ,competitive drag racing is the last thing I will be doing with this car.
I'm just trying to save my *** from a wall if the tires break loose when I least expect it and also to be able to accelerate through the first few gears at WOT without feathering the throttle.
I'll be getting back to the install soon enough.
.
I'm just trying to save my *** from a wall if the tires break loose when I least expect it and also to be able to accelerate through the first few gears at WOT without feathering the throttle.
I'll be getting back to the install soon enough.
.
I WAS JUST LOOKING BY CHANCE AND FOUND THIS THREAD. I AM IN AUSTRALIA AND RUNNING A FORGED 6.3 LITRE LS6 WITH DSC1, APROX 630 RWHP.I HAVE AFTER ABOUT 3 MONTHS OF CHECKING IT OUT ORDERED A RACELOGIC FOR MY C5. HAS YOUR UNIT WORKED OUT OKAY .
MY UNIT ARRIVES NEXT WEEK . THERE IS SOMEONE IN AUSTRALIA THAT HAS ONE FITTED TO AN LS1 HOLDEN (GM AUSTRALIA) AND SAYS IT IS A GOOD PIECE OF EQUIPMENT.
WAS THE SET UP PROGRAMMING SIDE A LONG PROCESS. UNIT I HAVE ORDERED DOES NOT HAVE DIGITAL CONTROLLER , I WILL BE USING MY LAPTOP FOR SETUP.
HAVE YOU RUN YOUR CAR ON A RACE TRACK WITH THE RACELOGIC.IF SO HOW DID IT GO...YOUR CAR IS AN AWESOME MACHINE ..FULL CREDIT TO YOU.
THANKS REGARDS , PETER C5 OZ
#89
Burning Brakes
Thread Starter
Member Since: Jul 2005
Location: Bloomingdale Illinois
Posts: 779
Likes: 0
Received 1 Like
on
1 Post
Hey C6 DUDE,
I WAS JUST LOOKING BY CHANCE AND FOUND THIS THREAD. I AM IN AUSTRALIA AND RUNNING A FORGED 6.3 LITRE LS6 WITH DSC1, APROX 630 RWHP.I HAVE AFTER ABOUT 3 MONTHS OF CHECKING IT OUT ORDERED A RACELOGIC FOR MY C5. HAS YOUR UNIT WORKED OUT OKAY .
MY UNIT ARRIVES NEXT WEEK . THERE IS SOMEONE IN AUSTRALIA THAT HAS ONE FITTED TO AN LS1 HOLDEN (GM AUSTRALIA) AND SAYS IT IS A GOOD PIECE OF EQUIPMENT.
WAS THE SET UP PROGRAMMING SIDE A LONG PROCESS. UNIT I HAVE ORDERED DOES NOT HAVE DIGITAL CONTROLLER , I WILL BE USING MY LAPTOP FOR SETUP.
HAVE YOU RUN YOUR CAR ON A RACE TRACK WITH THE RACELOGIC.IF SO HOW DID IT GO...YOUR CAR IS AN AWESOME MACHINE ..FULL CREDIT TO YOU.
THANKS REGARDS , PETER C5 OZ
I WAS JUST LOOKING BY CHANCE AND FOUND THIS THREAD. I AM IN AUSTRALIA AND RUNNING A FORGED 6.3 LITRE LS6 WITH DSC1, APROX 630 RWHP.I HAVE AFTER ABOUT 3 MONTHS OF CHECKING IT OUT ORDERED A RACELOGIC FOR MY C5. HAS YOUR UNIT WORKED OUT OKAY .
MY UNIT ARRIVES NEXT WEEK . THERE IS SOMEONE IN AUSTRALIA THAT HAS ONE FITTED TO AN LS1 HOLDEN (GM AUSTRALIA) AND SAYS IT IS A GOOD PIECE OF EQUIPMENT.
WAS THE SET UP PROGRAMMING SIDE A LONG PROCESS. UNIT I HAVE ORDERED DOES NOT HAVE DIGITAL CONTROLLER , I WILL BE USING MY LAPTOP FOR SETUP.
HAVE YOU RUN YOUR CAR ON A RACE TRACK WITH THE RACELOGIC.IF SO HOW DID IT GO...YOUR CAR IS AN AWESOME MACHINE ..FULL CREDIT TO YOU.
THANKS REGARDS , PETER C5 OZ
Hello there Peter from the land down under,
It's nice to hear some more positive feedback on the Racelogic unit.
I do not have it completely installed and tuned yet to give anybody any feedback because of the load of priorities that are consuming my time at this point.
The biggest being getting my shop up and running while building engines for people on the side.
I apologize for keeping you all on hold and starting this thread before the installation was completed.
Sincerely
Perry
p.s. Peter if you get yours installed/tuned feel free to add your experience to this thread.
#90
Hello there Peter from the land down under,
It's nice to hear some more positive feedback on the Racelogic unit.
I do not have it completely installed and tuned yet to give anybody any feedback because of the load of priorities that are consuming my time at this point.
The biggest being getting my shop up and running while building engines for people on the side.
I apologize for keeping you all on hold and starting this thread before the installation was completed.
Sincerely
Perry
p.s. Peter if you get yours installed/tuned feel free to add your experience to this thread.
I look forward to the challenge. My Traction system will be arriving early next . I ordered direct from RACELOGIC. I will certainly let everyone know how the install goes......STAY TUNED.
Regards , Peter.
#91
RACELOGIC Traction control now fitted to DSC 1 C5 and it WORKS !
Next step is set up of system to the car and set up of launch control.All looks good. Car will be back on the road in about a week or two .I will post again when I get a chance to put the system through its paces.
Next step is set up of system to the car and set up of launch control.All looks good. Car will be back on the road in about a week or two .I will post again when I get a chance to put the system through its paces.
#95
I had combined radiator engine oil cooler.I am fitting seperate large capacity oil cooler behind bumper. I have removed the styrene on the left side of the car and fitted an oil cooler there..I have also upgraded injectors to 60 lb .Latest dyno run is just under 600 hp at rear wheels. At this output we are having trouble keeping traction on rollers.
I will post some pictures and more information about the racelogic system in about 5-6 weeks when I get everything back together. It is winter here in Southern Australia now , hence the lack of any urgency . STAY TUNED!!
PETER.
#96
Any progress on Perry's car or Peter's car???
I am anxiously awaiting reviews on the product...
I am in the process of building a street-legal track car for spirited fun on road courses... I have a naturally-aspirated big block chevy with a Hogan's Racing manifold with a Big Stuff 3 ECU with MSD equipment.
I am interested in either purchasing the Traction-Control option for my BS3 ECU or go with a stand-alone system like the Racelogic system...
UPDATES PLEASE!!!
I am anxiously awaiting reviews on the product...
I am in the process of building a street-legal track car for spirited fun on road courses... I have a naturally-aspirated big block chevy with a Hogan's Racing manifold with a Big Stuff 3 ECU with MSD equipment.
I am interested in either purchasing the Traction-Control option for my BS3 ECU or go with a stand-alone system like the Racelogic system...
UPDATES PLEASE!!!
#99
Instructor
Member Since: Oct 2007
Location: tulsa ok
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
I'm beginning to wonder if this system is usable in the 'real world'. Several threads have been started, lots of hype, but no follow through on a functional and successful install.