C5/C6 Diff Special....
Thread Starter
Former Vendor
Joined: May 2003
Posts: 1,313
Likes: 4
From: Livermore CA
C5/C6 Diff Special....
So here is a special we are running till the end of the year.
Send us your C5/C6 (call for pricing on C6 Z06 diff) diff box and get our standard upgrade done. The upgrade includes....
-Gear of your choice. 3.15/3.42/3.73/3.90/4.10. (note, 3.73 is sometimes on backorder and might require an additional fee, please check with us.)
-tear down and inspection of parts.
-Thorough case and internal component cleaning
-Upgrade to stiffer pre-load springs for clutch packs.
-OE clutch packs. (upgrade to carbon packs for another 100.00)
-New seals
-Professional assembly for quiet smooth operation.
Year end special......$999.99
Other upgrade options include Micro Polishing, upgrade to Z06 output shafts, Or upgrade to Hardened output shafts. Please call for upgrade pricing. Contact Rick@synergymotorsports.net or call 510-796-3749.
Rick
Send us your C5/C6 (call for pricing on C6 Z06 diff) diff box and get our standard upgrade done. The upgrade includes....
-Gear of your choice. 3.15/3.42/3.73/3.90/4.10. (note, 3.73 is sometimes on backorder and might require an additional fee, please check with us.)
-tear down and inspection of parts.
-Thorough case and internal component cleaning
-Upgrade to stiffer pre-load springs for clutch packs.
-OE clutch packs. (upgrade to carbon packs for another 100.00)
-New seals
-Professional assembly for quiet smooth operation.
Year end special......$999.99
Other upgrade options include Micro Polishing, upgrade to Z06 output shafts, Or upgrade to Hardened output shafts. Please call for upgrade pricing. Contact Rick@synergymotorsports.net or call 510-796-3749.
Rick
Racer
Joined: Jul 2007
Posts: 292
Likes: 1
From: Chandler Arizona
I assume since you mention 3.15's that us A6 guys are covered here too? What is your express turnaround time/shipping?
Thanks!
Maybe a little sales blurb on how you compare with DTE? They seem to be the standard out there, but I think you'd have lots of interest at these prices.
Thanks!
Maybe a little sales blurb on how you compare with DTE? They seem to be the standard out there, but I think you'd have lots of interest at these prices.
Thread Starter
Former Vendor
Joined: May 2003
Posts: 1,313
Likes: 4
From: Livermore CA
I assume since you mention 3.15's that us A6 guys are covered here too? What is your express turnaround time/shipping?
Thanks!
Maybe a little sales blurb on how you compare with DTE? They seem to be the standard out there, but I think you'd have lots of interest at these prices.
Thanks!
Maybe a little sales blurb on how you compare with DTE? They seem to be the standard out there, but I think you'd have lots of interest at these prices.
I should clariy the 3.15 thing. The A6 and Z06 take a special 30 spline gear that has to be made to work. So if you have an A6, then it would be a few bucks more to have the 3.15 gear machined for the 30 spline shaft from your tranny.
All I can say is you have to try it to find out.
And keep in mind, sales blurbs are just that, sometimes you dont always get what they claim. Rick
Thread Starter
Former Vendor
Joined: May 2003
Posts: 1,313
Likes: 4
From: Livermore CA
Rick
Melting Slicks
Joined: Sep 2007
Posts: 2,597
Likes: 3
From: READING PA
St. Jude Donor '08-'09-'10
Doe you have any of the ZO6 diff boxes in stock for a swap out and does the ZO6 box contain a 9" RING GEAR. ? Ca you putit i while I wait ?
Melting Slicks
Joined: Jun 2006
Posts: 2,690
Likes: 1
From: Northern Calif
Here is my sales blurb for ya. Rick put the 315s in my A6 and it is great. Wish it came from the factory like this. His recalib was spot on too. I am very pleased with Ricks work. Anyone on the fence--get the gears. Spinmonster was the one that recommended them and he was right on.
Pro
Joined: Dec 2006
Posts: 561
Likes: 1
From: suwanee ga
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Burning Brakes
Joined: May 2006
Posts: 878
Likes: 0
From: Santa Clara CA
Another pat on the back for Rick. Does great work and a really cool guy to hang out with while he's working! I feel like I ought to get continuing education credits for hanging out at the shop!
Le Mans Master
Joined: May 2004
Posts: 8,155
Likes: 1
From: The United States of TEXAS www.corvettemotorsportsinc.com
St. Jude Donor '07-'08-'09-'10-'11
Team Owner
Joined: Mar 2005
Posts: 20,933
Likes: 905
From: salem OR
Ready to make an appointment.Monday.Plan is 1 day there, 1 day install, 1 day back!
i'm ready Rick they say the -05,06 gears will fit the 08's
i'm ready Rick they say the -05,06 gears will fit the 08's
Last edited by 3 Z06ZR1; Dec 5, 2007 at 07:40 PM.
Melting Slicks
Joined: Sep 2007
Posts: 2,597
Likes: 3
From: READING PA
St. Jude Donor '08-'09-'10
Thread Starter
Former Vendor
Joined: May 2003
Posts: 1,313
Likes: 4
From: Livermore CA