I'm still confused about the z06 and ls3 intake.help.
#1
Team Owner
Thread Starter
I'm still confused about the z06 and ls3 intake.help.
Are the airfilters on sale for the Z06 compatible with the LS3?08'S AND Z'S Have the same stock setup but what about the aftermarket stuff,other then VARARAM which I know is a different system for
ls3.I'm considering the BBK which says 2005-2007 vette and Z06 OR THE VETTEAIR filter thing.Not looking for gains just something different.
ls3.I'm considering the BBK which says 2005-2007 vette and Z06 OR THE VETTEAIR filter thing.Not looking for gains just something different.
#5
The LS3 throttle body is a larger diameter than the LS2 throttle body.
The Ls3 throttle body is the same size as the C6 Z06
The LS3 airbridge incorporates a location for the mass airflow where the LS2 airbridge attaches with a coupler to the MAF which attaches to the throttle body with another coupler.
The Ls3 throttle body is the same size as the C6 Z06
The LS3 airbridge incorporates a location for the mass airflow where the LS2 airbridge attaches with a coupler to the MAF which attaches to the throttle body with another coupler.
#6
Team Owner
Thread Starter
The LS3 throttle body is a larger diameter than the LS2 throttle body.
The Ls3 throttle body is the same size as the C6 Z06
The LS3 airbridge incorporates a location for the mass airflow where the LS2 airbridge attaches with a coupler to the MAF which attaches to the throttle body with another coupler.
The Ls3 throttle body is the same size as the C6 Z06
The LS3 airbridge incorporates a location for the mass airflow where the LS2 airbridge attaches with a coupler to the MAF which attaches to the throttle body with another coupler.
#7
Yes, the C6 Z06 airbridge is identical to the LS3 airbridge except the LS3 airbridge has a heimholtz box on the passenger side to reduce air noise. The MAF sensor bolts into the driver side of the LS3 and Z06 airbridge.
#9
#11
Team Owner
Thread Starter
So I can't buy an 07 Z06 air filter setup say BBK according to them,because it won't fit.But I can buy any other Z06 air setup and it'll work.ODD.I guess those extra maf things on the 08 absolutely,positively need to be hooked up?
#12
Race Director
#13
Instructor
Member Since: May 2007
Location: Brooklyn New York
Posts: 190
Likes: 0
Received 55 Likes
on
22 Posts
I called K&N last Friday, they said as of now there is no LS3 intake in the works, and they are to busy with other projects. SLP Blackwing is going to have a LS3 intake out in about a month, and thats what I am ordering for my 08.
#15
The intake is available now! Same as the Z06
http://www.knfilters.com/search/prod...Prod=63-3060-1
Anyone interested in this intake for the lowest price, send a PM.
Last edited by NHRA95; 08-07-2008 at 07:37 PM.
#17
Safety Car
Whoever you talked to should be fired!
The intake is available now! Same as the Z06
http://www.knfilters.com/search/prod...Prod=63-3060-1
Anyone interested in this intake for the lowest price, send a PM.
The intake is available now! Same as the Z06
http://www.knfilters.com/search/prod...Prod=63-3060-1
Anyone interested in this intake for the lowest price, send a PM.
Last edited by MarkRx; 08-07-2008 at 10:46 PM.
#19
Team Owner
Thread Starter
Well,I bought that VETTE AIR thing. Didn't want to cut the shroud all to hell for the VARARAM,nor did I want to spend 400 bucks and this seemed like a fair compromise to go with the Hood I just bought.Thanks for the responses.