View Poll Results: What should I do with the black rims:
Keep them all black
29
45.31%
Paint a thin red lip around the edge of the wheel to match the calipers
26
40.63%
Keep the stock polishe wheels
9
14.06%
Voters: 64. You may not vote on this poll
Getting closer (Wheels are back from powdercoating, reflectors blacked out)
#21
Melting Slicks
there is a big difference in the powder coating from baad2000z to Pwlbs wheels.
I know who's doing mine!!
I know who's doing mine!!
Last edited by pmj341; 03-10-2009 at 08:58 PM.
#22
Former Vendor
Member Since: Aug 2005
Location: Loganville GA
Posts: 5,774
Likes: 0
Received 0 Likes
on
0 Posts
Sam, there is a motorcycle vendor on ebay who sells tape for the wheels. Normally they sell for 17" motorcycle wheels, but a friend of mine wrote and asked for tape for his 19" inifiniti wheels and they cut it for him. They come in small strips, so about 5 pieces to a wheel, but he got enough strips to do about 8 wheels for 15. I didn't do his wheels, as he isn't local, but I did do the calipers.
#23
Le Mans Master
Thread Starter
Member Since: Oct 2007
Location: Greater Detroit Metro MI, when I'm not travelling.
Posts: 6,149
Likes: 0
Received 10 Likes
on
10 Posts
Sam, there is a motorcycle vendor on ebay who sells tape for the wheels. Normally they sell for 17" motorcycle wheels, but a friend of mine wrote and asked for tape for his 19" inifiniti wheels and they cut it for him. They come in small strips, so about 5 pieces to a wheel, but he got enough strips to do about 8 wheels for 15. I didn't do his wheels, as he isn't local, but I did do the calipers.
#24
Safety Car
Member Since: Sep 2007
Location: Los Alamitos California
Posts: 4,359
Likes: 0
Received 6 Likes
on
6 Posts
St. Jude Donor '09
San
#25
Le Mans Master
Thread Starter
Member Since: Oct 2007
Location: Greater Detroit Metro MI, when I'm not travelling.
Posts: 6,149
Likes: 0
Received 10 Likes
on
10 Posts
You are way picky! I was going to pay a body shop to professionally paint that lip on my wheels. I think the tape is a really cheap (15 bucks or so) way of getting 99% of that look without commiting to having the lip on there for ever... I can always power wash the tape off...
#26
Safety Car
Member Since: Sep 2007
Location: Los Alamitos California
Posts: 4,359
Likes: 0
Received 6 Likes
on
6 Posts
St. Jude Donor '09
You are way picky! I was going to pay a body shop to professionally paint that lip on my wheels. I think the tape is a really cheap (15 bucks or so) way of getting 99% of that look without commiting to having the lip on there for ever... I can always power wash the tape off...
San
#28
Drifting
There is a member on here (cg-vette) that has his black wheel striped red. You might search his name and look for pics. I asked him awhile back about it and this was his answer:
Glad to help you with your questions. Yes, the stripping is a 1/4 inch. I ordered it from an online store that provides motorcycle rim striping. I believe I got the "Ducati red" color but they have tons to choose from. I ordered it from www.tapeworks.com.
Rob
Glad to help you with your questions. Yes, the stripping is a 1/4 inch. I ordered it from an online store that provides motorcycle rim striping. I believe I got the "Ducati red" color but they have tons to choose from. I ordered it from www.tapeworks.com.
Rob
#29
Drifting
There is a member on here (cg-vette) that has his black wheels striped red. You might search his name and look for pics. I asked him awhile back about it and this was his answer:
Rob
Originally Posted by cg-vette
Glad to help you with your questions. Yes, the stripping is a 1/4 inch. I ordered it from an online store that provides motorcycle rim striping. I believe I got the "Ducati red" color but they have tons to choose from. I ordered it from www.tapeworks.com.
Rob
#30
Hey just thought i would throw this out there for you to consider.
I think if you put the grand sport fender stripes without the hood stripe, and if you left the wheels all black with the red calipers would look pretty awesome. The fender and/or hood stripes with the wheel stripe and the red calipers would be too much red IMO.
Again just tossing up ideas, but like you said, if you dont like the red stripe on the wheels you could easily yank it off.
I think if you put the grand sport fender stripes without the hood stripe, and if you left the wheels all black with the red calipers would look pretty awesome. The fender and/or hood stripes with the wheel stripe and the red calipers would be too much red IMO.
Again just tossing up ideas, but like you said, if you dont like the red stripe on the wheels you could easily yank it off.
#31
If you black out the wheels and do the grand sport stripes, then you'll be doing the look I had a while back.
Right now I have blacked out side lights, 20% tint, black rims, red calipers. I did have the red GS stripes for a while, and at one point had comp gray rims.
Currently all black photos:
http://forums.corvetteforum.com/c6-c...tos-today.html
All black with the red stripe, but before blacked out side lights:
http://forums.corvetteforum.com/c6-c...-pictures.html
When I had the stripe and comp gray rims:
http://forums.corvetteforum.com/c6-c...me-f-bods.html
When I return I'm thinking about putting the red stripes back on...
Right now I have blacked out side lights, 20% tint, black rims, red calipers. I did have the red GS stripes for a while, and at one point had comp gray rims.
Currently all black photos:
http://forums.corvetteforum.com/c6-c...tos-today.html
All black with the red stripe, but before blacked out side lights:
http://forums.corvetteforum.com/c6-c...-pictures.html
When I had the stripe and comp gray rims:
http://forums.corvetteforum.com/c6-c...me-f-bods.html
When I return I'm thinking about putting the red stripes back on...
#33
Former Vendor
Member Since: Aug 2005
Location: Loganville GA
Posts: 5,774
Likes: 0
Received 0 Likes
on
0 Posts
#34
Former Vendor
Member Since: Aug 2005
Location: Loganville GA
Posts: 5,774
Likes: 0
Received 0 Likes
on
0 Posts
Wheels were mostly stripped. Hand sanded down to bare metal in most places. One was sent out and completely stripped and media blasted, because I wasn't happy with the finish and had to redo it.
#35
Le Mans Master
Thread Starter
Member Since: Oct 2007
Location: Greater Detroit Metro MI, when I'm not travelling.
Posts: 6,149
Likes: 0
Received 10 Likes
on
10 Posts
If you black out the wheels and do the grand sport stripes, then you'll be doing the look I had a while back.
Right now I have blacked out side lights, 20% tint, black rims, red calipers. I did have the red GS stripes for a while, and at one point had comp gray rims.
Currently all black photos:
http://forums.corvetteforum.com/c6-c...tos-today.html
All black with the red stripe, but before blacked out side lights:
http://forums.corvetteforum.com/c6-c...-pictures.html
When I had the stripe and comp gray rims:
http://forums.corvetteforum.com/c6-c...me-f-bods.html
When I return I'm thinking about putting the red stripes back on...
Right now I have blacked out side lights, 20% tint, black rims, red calipers. I did have the red GS stripes for a while, and at one point had comp gray rims.
Currently all black photos:
http://forums.corvetteforum.com/c6-c...tos-today.html
All black with the red stripe, but before blacked out side lights:
http://forums.corvetteforum.com/c6-c...-pictures.html
When I had the stripe and comp gray rims:
http://forums.corvetteforum.com/c6-c...me-f-bods.html
When I return I'm thinking about putting the red stripes back on...
VERY NICE!
I definitely like it better with the red fender stripes: No question about it.
But I still can't decide if the red lips and hood stripes would be too much red... I think the best plan is to just do it and take them off if I don't like it...
#36
Melting Slicks
I was at a shop today and saw a set of black PC wheels looked almost as good as yours,
they had the word Corvette in fineline letters(red) on one spoke, nothing else,
looked great!!!
they had the word Corvette in fineline letters(red) on one spoke, nothing else,
looked great!!!
#37
Le Mans Master
Thread Starter
Member Since: Oct 2007
Location: Greater Detroit Metro MI, when I'm not travelling.
Posts: 6,149
Likes: 0
Received 10 Likes
on
10 Posts
Even closer!
Got my GM Certified Official Merchandise C6 logos, and stuck them to the center caps... Since the caps have an odd shape, I made a template to identify the exact geometric center of the logos and the caps, and line them both up
One of the wheels... No red ring yet...
One of the wheels... No red ring yet...