Texas Speed C6 Long Tube Headers & X Pipe Results & Pricing!!
05-15-2009, 01:05 PM
#22
Melting Slicks
Member Since: Nov 2005
Location: Houston 06 C6 Ysi SC 402 fgd TX
Posts: 2,345
Likes: 0
Received 2 Likes
on
2 Posts
AMEN!!! ...and this one won't get closed because a *SUPPORTING VENDOR* posted it, now the question is are you going to also be fabbing a 1 7/8" version as that seems to be the best way for us LS3 guys?
Also, compared to the $1500+ catless systems, aren't the gains identical on a LS2 auto?
The $1000 I save on other headers that perform no better and the optionial coating's going to buy a lot of beer!
Also, compared to the $1500+ catless systems, aren't the gains identical on a LS2 auto?
The $1000 I save on other headers that perform no better and the optionial coating's going to buy a lot of beer!
HOw about a 1 7/8 for LS2? also?
05-15-2009, 02:14 PM
#24
Race Director
While Ceramic Coating will give your headers a great look, the benefit of the coating over mild steel AND stainless steel is the heat reduction underhood. The coating will drop underhood temps and give the headers a great look....Worth every penny, IMO, and I have done 5 sets of headers on my projects to date with the coating.
Last edited by WhiteDiamond; 05-15-2009 at 02:14 PM. Reason: spelling
05-17-2009, 07:45 PM
#27
Pro
Member Since: Mar 2009
Location: Columbia South Carolina
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Questions:
Does this price includes Off road X Pipe? (I doubt it does - but then how much for off road X Pipe?)
What about 1 7/8 set up and if it will be available? when?
What about this complete set for 2006 Z06? price?
Thanks
TTT
Does this price includes Off road X Pipe? (I doubt it does - but then how much for off road X Pipe?)
What about 1 7/8 set up and if it will be available? when?
What about this complete set for 2006 Z06? price?
Thanks
TTT
Guys the Texas Speed C6 long tube headers & x pipe is now available! This time we didn't tell anyone they were coming until we had a run of 50 sets on the shelf & ready to go! Here's the info:
1 3/4" Headers
Mild Steel
Ceramic Coated
3" X Pipe System
Available Off-Road Now & Cat Very Soon!!
Dyno Results:
Before & After On 07 Vette A6 BONE STOCK NO TUNE ON EITHER CONFIGURATION!
Pricing $769.99 Complete With o2 Extensions INTRO PRICING!!!
Install Pics:
1 3/4" Headers
Mild Steel
Ceramic Coated
3" X Pipe System
Available Off-Road Now & Cat Very Soon!!
Dyno Results:
Before & After On 07 Vette A6 BONE STOCK NO TUNE ON EITHER CONFIGURATION!
Pricing $769.99 Complete With o2 Extensions INTRO PRICING!!!
Install Pics:
05-17-2009, 08:28 PM
#28
Burning Brakes
Member Since: Feb 2004
Location: Camarillo/Oxnard CA
Posts: 1,130
Likes: 0
Received 0 Likes
on
0 Posts
Bang for the buck you can't beat these. I've installed dozens of these in their C5 version over the last 2 years without any problems. From stock to built 427 w/ Ysi these work great and for the price it's a good idea for those not wanting the highest priced headers out there. I'm sure I'll be putting some of these C6 versions on shortly since I've had clients asking for a more affordable C6 LT. 
05-18-2009, 12:07 PM
#30
Race Director
Member Since: Mar 2007
Location: Missouri City Texas
Posts: 11,331
Likes: 0
Received 14 Likes
on
14 Posts
For all those asking abuot the X-pipe, I'm sure that it is included with the way they are pricing this setup and the market they're lookign to attract...plus the language of the post.
I COULD be wrong, but that's what I get from it and assume.
I COULD be wrong, but that's what I get from it and assume.
05-18-2009, 09:55 PM
#33
Premium Supporting Vendor
Thread Starter
Sorry guys I was away working on the Camaro stuff & just got back to the computer. The headers & x are a kit, we'll be adding the cat option later this month. You can order them over the phone anytime, they're in stock & ready to ship.
They are 1 3/4" Ceramic coated headers & we currently have no plans for a 1 7/8" version.
The headers & x are completely made in the U.S.A.
The header & x kit ships with headers, x pipe, & o2 extensions!!
They are 1 3/4" Ceramic coated headers & we currently have no plans for a 1 7/8" version.
The headers & x are completely made in the U.S.A.
The header & x kit ships with headers, x pipe, & o2 extensions!!
05-18-2009, 10:02 PM
#35
Pro
Member Since: Mar 2009
Location: Columbia South Carolina
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
05-18-2009, 11:27 PM
#38
Pro
Member Since: Mar 2009
Location: Columbia South Carolina
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
I just need to know if it will fit 06z06 so that i can call vendor and order me a set.
05-19-2009, 03:14 AM
#40
Team Owner
Until you get some cats, You can't really compare them. Unless you order the Big 3 with no cats also.
Last edited by 3 Z06ZR1; 05-19-2009 at 03:16 AM.