that little nut thingy that hols the TPMS in
#1
Pro
Thread Starter
that little nut thingy that hols the TPMS in
If I buy a new set of TPMS sensors do they come with the nut that holds them in from the outside or is that a separate item? I ask because it looks like the GM sensors DO NOT come with this nut and if I want to run a second set of wheels with sensors I'm going to need this nut and obviously can't pull them from the other wheels.
#2
Race Director
Here's a cut-n-paste from Gene Culley's website
if you get new ones just order the nuts when you order the sensors.
Bob
||--Tire Pressure Sensors--||
25758220 – Tire pressure sensor – 57.21 each
15234846 – Tire pressure sensor nut – 3.73 each
Total set of 4 nuts and 4 sensors 267.65 shipped.
Note: The sensor comes with the washer and valve stem cap.
Setup includes: 4 sensors, 4 washers/o-rings, 4 caps and 4 nuts.
If you get some used sensors they may come with the nuts. However, new ones do not come with the nut. As Gene mentions, new ones come with the rubber grommet and a valve stem cap, and also include a valve stem core.25758220 – Tire pressure sensor – 57.21 each
15234846 – Tire pressure sensor nut – 3.73 each
Total set of 4 nuts and 4 sensors 267.65 shipped.
Note: The sensor comes with the washer and valve stem cap.
Setup includes: 4 sensors, 4 washers/o-rings, 4 caps and 4 nuts.
if you get new ones just order the nuts when you order the sensors.
Bob