Hennessey Performance HPE700 Grandsport
#1
Former Vendor
Thread Starter
Hennessey Performance HPE700 Grandsport
Here are a few images and details of a vehicle that was shipped to our Houston, TX facility from the West Coast to have our HPE700 Engine Upgrade (Details Below) installed on a Brand New 2012 Chevrolet Corvette Grandsport. Take a moment to look at the images of this Sleeper that is making over 700bhp on 91 Octane Fuel.
HPE700 Supercharged Includes
• TVS2300 Supercharger System
• High Flow Air Induction System
• High Flow Cylinder Heads
• Hennessey HPE700 Camshaft
• Stainless Steel Long Tube Headers
• High Flow Catalytic Converters
• Fuel Injector & Boost-A-Pump Upgrade
• 160 Degree Thermostat
• All Necessary Gaskets & Fluids
• Professional Installation
• HPE Engine Management Calibration
• Dyno Tuning & Road Testing
• Hennessey Exterior Badging
• Hennessey Premium Floormats
• Serial-Numbered Dash and Engine Plaques
• 3 yr / 36,000 Mile Limited Warranty
Enjoy the images and if you would like more information, please feel free to call us at 713-650-5322.
HPE700 Supercharged Includes
• TVS2300 Supercharger System
• High Flow Air Induction System
• High Flow Cylinder Heads
• Hennessey HPE700 Camshaft
• Stainless Steel Long Tube Headers
• High Flow Catalytic Converters
• Fuel Injector & Boost-A-Pump Upgrade
• 160 Degree Thermostat
• All Necessary Gaskets & Fluids
• Professional Installation
• HPE Engine Management Calibration
• Dyno Tuning & Road Testing
• Hennessey Exterior Badging
• Hennessey Premium Floormats
• Serial-Numbered Dash and Engine Plaques
• 3 yr / 36,000 Mile Limited Warranty
Enjoy the images and if you would like more information, please feel free to call us at 713-650-5322.
#3
There's another 2011 HPE700 Grandsport in Houston that went 11.1 @ 127mph @ Lonestar in Sealy, TX
http://www.youtube.com/watch?v=ohTzFulNsZA
http://www.youtube.com/watch?v=ohTzFulNsZA
Last edited by All_Motor_C5LS6; 10-06-2011 at 01:54 PM.
#4
Former Vendor
Thread Starter
There's another 2011 HPE700 Grandsport in Houston that went 11.1 @ 127mph @ Lonestar in Sealy, TX
http://www.youtube.com/watch?v=ohTzFulNsZA
http://www.youtube.com/watch?v=ohTzFulNsZA
#5
#6
Race Director
Member Since: Mar 2007
Location: Missouri City Texas
Posts: 11,331
Likes: 0
Received 14 Likes
on
14 Posts
There's another 2011 HPE700 Grandsport in Houston that went 11.1 @ 127mph @ Lonestar in Sealy, TX
http://www.youtube.com/watch?v=ohTzFulNsZA
http://www.youtube.com/watch?v=ohTzFulNsZA
Seems very low for a 700hp motor.
#11
Pro
Nice car + warranty is good for piece of mind.
How much would one expect the add or take away for 'vert' vs a comparable coupe in the Qtr? ((((assume all else equal please))))?
How much would one expect the add or take away for 'vert' vs a comparable coupe in the Qtr? ((((assume all else equal please))))?
Last edited by gsx1300r; 10-07-2011 at 03:48 PM. Reason: added 'in the Qtr'
#12
Le Mans Master
Vert is less than 30 lbs heavier, not like the old verts that were a few hundred pounds heavier.
#13
Tech Contributor
Is this Hennessey package considered a production car as the Callaway cars are? I ask because some places like Germany dont allow any performance mods at all from factory stock. A callaway is a production car so anything they did to it is stock for that car. If the Hennessey package is the same, its a great way for military guys in those parts of the world to take advantage of modding a corvette.
#14
Race Director
Member Since: Mar 2007
Location: Missouri City Texas
Posts: 11,331
Likes: 0
Received 14 Likes
on
14 Posts
This guy just went 129mph in his A6 Vert without heads, cam or longtubes that this car has. AND it was with an LS2, not an LS3 like this car.
Something is definitely very wrong with that run to not EASILY break 130 mph. I would expect it to be closer to 133-135mph. We're talking about a car that should be over 600rwhp. If the run was made in the middle of the Houston summer and 100+ degrees outside I can understand having pretty low MPH though.
http://forums.corvetteforum.com/c6-t...ce-please.html
Last edited by FloydSummerOf68; 10-07-2011 at 06:59 PM.
#15
Le Mans Master
No...127mph is VERY slow for that car.
This guy just went 129mph in his A6 Vert without heads, cam or longtubes that this car has. AND it was with an LS2, not an LS3 like this car.
Something is definitely very wrong with that run to not EASILY break 130 mph. I would expect it to be closer to 133-135mph. We're talking about a car that should be over 600rwhp. If the run was made in the middle of the Houston summer and 100+ degrees outside I can understand having pretty low MPH though.
http://forums.corvetteforum.com/c6-t...ce-please.html
This guy just went 129mph in his A6 Vert without heads, cam or longtubes that this car has. AND it was with an LS2, not an LS3 like this car.
Something is definitely very wrong with that run to not EASILY break 130 mph. I would expect it to be closer to 133-135mph. We're talking about a car that should be over 600rwhp. If the run was made in the middle of the Houston summer and 100+ degrees outside I can understand having pretty low MPH though.
http://forums.corvetteforum.com/c6-t...ce-please.html
#17
Safety Car
Is Hennessey reputable again? I thought there was a big problem about failure to deliver, parting out owners cars, etc a few years back that put them out of the "good to do business with" category?
This is old, but I'm surprised people continue to give him money.
http://www.gminsidenews.com/forums/f...per-guy-34744/
This is old, but I'm surprised people continue to give him money.
http://www.gminsidenews.com/forums/f...per-guy-34744/
#18
Is Hennessey reputable again? I thought there was a big problem about failure to deliver, parting out owners cars, etc a few years back that put them out of the "good to do business with" category?
This is old, but I'm surprised people continue to give him money.
http://www.gminsidenews.com/forums/f...per-guy-34744/
This is old, but I'm surprised people continue to give him money.
http://www.gminsidenews.com/forums/f...per-guy-34744/
#19
Is Hennessey reputable again? I thought there was a big problem about failure to deliver, parting out owners cars, etc a few years back that put them out of the "good to do business with" category?
This is old, but I'm surprised people continue to give him money.
http://www.gminsidenews.com/forums/f...per-guy-34744/
This is old, but I'm surprised people continue to give him money.
http://www.gminsidenews.com/forums/f...per-guy-34744/