ls2 with l92/ls3 heads and cam
#1
ls2 with l92/ls3 heads and cam
What kind of numbers are you ls2 guys making that have done the ls3/l92 heads and intake and a cam? I am looking to do this over winter and im just curious what some other peoples results were.
#2
Instructor
Member Since: Apr 2007
Location: Budapest
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I don't have numbers, but with a small cam (g6xe) and a FAST intake I run 11.25@124 at a DA1400. I'm sure that with a bigger cam (may require flycutting) you will get better results. The fastest Z06 in Hungary runs 11.2@125 on drag radials, with intake, Vararam, tune. Based on that I would say that my car has at least 450 rwhp.
#3
Theres a guy here with a full bolt-on cam only ls2 running running 11.20s@123. From what I have been seeing is that people with this set up have been getting upper 400's and even over 500 wheel.
#5
#6
#7
#8
Drifting
I have l92 heads with a l76 intake,headers,hi flo cats,exhaust,decent sized cam 3.42 gears and a converter. It made 456\427 I ran my best time last wednesday 10.78 in the quarter 1.43 60'
#11
Instructor
Member Since: Apr 2007
Location: Budapest
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
He's more than welcome to duplicate this in Hungary at a higher DA and an unprepped track. My DA corrected times are 11.0@126-127 still on an unprepped track. And I have a sleeper cam, some people wouldn't even notice there's a cam in it. Driveability was very important to me. With proper heads and a bigger cam you should see numbers close to 500 rwhp.
#12
He's more than welcome to duplicate this in Hungary at a higher DA and an unprepped track. My DA corrected times are 11.0@126-127 still on an unprepped track. And I have a sleeper cam, some people wouldn't even notice there's a cam in it. Driveability was very important to me. With proper heads and a bigger cam you should see numbers close to 500 rwhp.