When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am removing the ECM from C6 Z06 I have located it and taken the 2 screws off freeing it from its bracket; now I am stumped as to how to remove the plug in wiring to the ECM, any advice as to how to remove from from ECM w/o damaging it?
Ok this makes sense, it didnt seem to want to pull out very easy last night after I pulled the red clip back. I plan to send this out to you folks later this week. Do you have a cell# I have some questions.
Originally Posted by DOUG @ ECS
Very easy, pull the red clip back to unclip, lift plastic arm and it pulls the harness off of the ECM.
Ok this makes sense, it didnt seem to want to pull out very easy last night after I pulled the red clip back. I plan to send this out to you folks later this week. Do you have a cell# I have some questions.
609-752-0321, just let whoever answers that you have a tuning question and they will find me.