New intake installed, car won't start
#1
New intake installed, car won't start
Last night I installed a new intake and now my car won't start until I pull the battery. Any idea whats causing the issue? It wasnt like this before. Its an 05 Z51. Any help is greatly appreciated
#5
The car won't start after sitting for a little. When I unplug the battery it resets everything and it'll start. I'm confused as well.
#8
Race Director
So, if you disconnect the negative cable then reconnect it everything works?
If so I suspect you have a bad cable connection, probably at the battery but could be either end of whichever cable you are disconnecting..
If so I suspect you have a bad cable connection, probably at the battery but could be either end of whichever cable you are disconnecting..
#11
Is it an 05?
http://forums.corvetteforum.com/c6-c...ssues-fix.html
When it doesnt want to start do you hear the column unlock? or is it just quiet and the gauges sweep but no starting?
http://forums.corvetteforum.com/c6-c...ssues-fix.html
When it doesnt want to start do you hear the column unlock? or is it just quiet and the gauges sweep but no starting?