C6 K-Member Replacement
Safety Car
Joined: Jul 2009
Posts: 3,755
Likes: 190
From: Baton Rouge LA
St. Jude Donor '14, '16
Here's what Alldata has on the subject, probably not as good as a factory manual and even goes too far on some steps I'd imagine. I have a feeling this can be simplified quite a bit.
https://drive.google.com/file/d/0Byy...ew?usp=sharing
Thread Starter
Advanced
Joined: Feb 2016
Posts: 75
Likes: 10
From: Baton Rouge LA
Safety Car
Joined: Jul 2009
Posts: 3,755
Likes: 190
From: Baton Rouge LA
St. Jude Donor '14, '16
Finally got the car back from the mechanic. Brought to body shop today, upper control arm IS bent. Good eye! Body shop also stated replacing crossmember would be prudent, but probably not a requirement. Its going to go on the car since I have it, but having the frame pulled to spec on June 6th. Sevinn, we have plenty of time! Learned that if I try to install the crossmember with the frame twisted I would have to slot the crossmember, so I am just going to have to wait.
