Active handling turns on after I have turned it off
#1
4th Gear
Thread Starter
Member Since: Apr 2015
Location: Pensacola Florida
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Active handling turns on after I have turned it off
I have a modified 2012 Grand Sport with 710hp/669tq, TR6060.
When I turn off the Torque Control and Active Handling, sometimes under hard acceleration the Brake and other warning lights flash on, the GPS screen resets, and the Active Handling comes back on.
Anyone ever have this problem?
When I turn off the Torque Control and Active Handling, sometimes under hard acceleration the Brake and other warning lights flash on, the GPS screen resets, and the Active Handling comes back on.
Anyone ever have this problem?
#2
Pull any stored DTV codes, but the problem sounds like a questionable module connector that is getting disconnect on one of its pin connector for a micro second to reset not only the BCM, but EBCM as well.
Hence you can't turn off ABS in the EBCM (which controls AH as well), but when the module glitches/has problems, it will start sending codes that can push the nannies back on instead.
Hence you can't turn off ABS in the EBCM (which controls AH as well), but when the module glitches/has problems, it will start sending codes that can push the nannies back on instead.