George_george

I have a 12 GS and will be installing a fast 102 intake nw throttle body and fast fuel rails... isnit easy? Any instructions? Also looking for torque specs. Thanks!

BlindSpot

Torque specs:

Brandon619

Here you go, these are the manifold instructions. The fuel rails and throttle body are a straight forward install

http://paceperformance.com/attachment/35460-.pdf

George_george

Thank you so much very helpful! Is the manifold sequence the same for Ls3 and Ls7?

z06scentair

Yes all use the same torque sequence. You will need to allow temps to come up and then re-torque.

Repeat this process after a few more drive cycles.

Dano523

The hardest part of the install, getting the intake under the rear cowling without rolling one of the O rings off the intake runners.




So get someone one to help you to first seat the intake, since although it light, it' really a two man job to get it placed without knocking a O ring out of place.

http://www.superchevy.com/how-to/eng...-on-stock-ls3/