2007 c6 base NGK TR6 SN: 4177 ok to run?
#1
Intermediate
Thread Starter
2007 c6 base NGK TR6 SN: 4177 ok to run?
I have a 2007 c6 base with 1 7/8 texas speed headers, X-Pipe, corsa sport, ramair intake, and MSD wires. I new to American cars and to V8's expescially. (Last car was a stage 2, 2016 STI)
My tuner/friend suggested them but when I went to get the plugs the parts manager continued to tell me they would not run very well and would cause problems. I contacted my tuner and he said they are the exact ones he said to get. Am I over thinking this or do they need to be changed for something else?
thanks in advance!!
My tuner/friend suggested them but when I went to get the plugs the parts manager continued to tell me they would not run very well and would cause problems. I contacted my tuner and he said they are the exact ones he said to get. Am I over thinking this or do they need to be changed for something else?
thanks in advance!!
#2
They are fine. I have a 07 z51 with an a&a supercharger and I'm running the NGK TR6, I will be switching to the BR7EF when I cam the car which will be soon. I think your tuner would know more than a parts manager at an auto store as well.
#3
Le Mans Master
There's absolutely no reason to change from the stock plugs the way you're configured. The TR6 plugs have been known to cause issues. Argue it if you wish. I wouldn't use them if you gave them to me.
#4
Supporting Vendor
I agree, as the TR6 plugs are crap! Apart from the car not running right with them installed, I even had engine knock with them at friggin idle.
#5
Safety Car
I agree and wouldn't run them either.got a set of those NGK's with supercharger but installed the ZR1 Iridium plug instead.no issues with them ever.if GM can warranty the ZR1 engine for 5 years with those GM iridium plugs then that is good enough for me
Last edited by irok; 07-18-2018 at 10:23 AM.