C6 Suspension for drag racing
#1
C6 Suspension for drag racing
I need some insight on what suspension would be good to run on a C6, LS3, auto, N/A, running in the high 10's? Any insight or suggestions please
#2
Melting Slicks
Factory suspension is pretty good you can adjust ride height and pre-load any corner just get two way adjustable shocks front and rear to control weight transfer.
#3
Race Director
Member Since: Sep 2007
Location: Peoria/Phoenix AZ
Posts: 16,555
Received 2,061 Likes
on
1,505 Posts
C6 of Year Finalist (performance mods) 2019
#4
Team Owner
What xboost said.
In fact I'll have a set of used viking DA shocks for sale soon.
In fact I'll have a set of used viking DA shocks for sale soon.
#5
Supporting Vendor
#7
Team Owner
As soon as new stuff shows up, probably by end of the month.
#9
AMP Racing
Member Since: Aug 2006
Location: Washington TWP NJ
Posts: 10,446
Received 466 Likes
on
352 Posts
2023 C5 of the Year Finalist - Modified
2017 C5 of Year Finalist
St. Jude Donor '09-'10-'11-'12
Yeh... many running in the 9s with bone stock suspensions.
If you feel you must get something, a simple adjustable shock like QA-1 or Viking will work just fine.
If you feel you must get something, a simple adjustable shock like QA-1 or Viking will work just fine.
#10
Burning Brakes
Earlier this year I ran 10.9s back to back at different tracks with stock suspension and a small torque converter. I have since moved to el paso so elivation is killing me on my times but I'm cutting 1.4s no problem with nitrous and 1.6s na here still.
#11
Burning Brakes
#16
Melting Slicks
Just why I said stock will do I have double adjustable QA1 all four corners on my c6 GS but will not advise anyone to get em sense they will fit the C5 but must do some work to make em work on the C6.
If you are ok doing the work then get the two inch longer fronts with 12 inch long 250 springs for street & strip stock length rears and 300 springs.
If you are ok doing the work then get the two inch longer fronts with 12 inch long 250 springs for street & strip stock length rears and 300 springs.
#17
Supporting Vendor
Just why I said stock will do I have double adjustable QA1 all four corners on my c6 GS but will not advise anyone to get em sense they will fit the C5 but must do some work to make em work on the C6.
If you are ok doing the work then get the two inch longer fronts with 12 inch long 250 springs for street & strip stock length rears and 300 springs.
If you are ok doing the work then get the two inch longer fronts with 12 inch long 250 springs for street & strip stock length rears and 300 springs.