C6 Tech/Performance LS2, LS3, LS7, LS9 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Ls2 C6 full build help

Thread Tools
 
Search this Thread
 
Old 12-31-2017, 08:29 PM
  #21  
MGMDET
Advanced
 
MGMDET's Avatar
 
Member Since: Dec 2016
Location: Chesterfield Michigan
Posts: 60
Received 16 Likes on 15 Posts
Default

Originally Posted by C6KWJ
Don’t go with a centri blower go with a twin screw or roots blower as the torque is down low at 2,000 rpms.With a centri blower they drive stock until about 3,500 rpms when boost kicks in. I had a 500 rwhp centri car before if I could do it again I would go in the other direction in terms of a supercharger or turbo.
It’s way too late to change now. But the reason you stated is the exact reason I didn’t go with a roots blower. I drive a 675rwhp C5Z with a roots blower regularly, too much low end torque for the car. If I was looking to be down around 500 I might agree but when you get into higher numbers I don’t find good PD options nor do I like the driving characteristics.
The following users liked this post:
HC Mechanic (12-31-2017)



Quick Reply: Ls2 C6 full build help



All times are GMT -4. The time now is 12:29 PM.