C6 Tech/Performance LS2, LS3, LS7, LS9 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Clutch suggestions

Thread Tools
 
Search this Thread
 
Old 09-20-2018, 06:40 PM
  #1  
EuroRod
Race Director
Thread Starter
 
EuroRod's Avatar
 
Member Since: Jan 2006
Posts: 18,396
Received 168 Likes on 66 Posts

Default Clutch suggestions

Look8ng for suggestions and experience with a clutch to survive 750 rwhp that is street friendly.

Thanks.
Old 09-20-2018, 09:53 PM
  #2  
LSXvnm
Instructor
 
LSXvnm's Avatar
 
Member Since: Sep 2013
Posts: 159
Received 7 Likes on 7 Posts
Default

Originally Posted by EuroRod
Look8ng for suggestions and experience with a clutch to survive 750 rwhp that is street friendly.

Thanks.
McCLeod RXT or Mantic twin
Old 09-20-2018, 10:53 PM
  #3  
saplumr
Race Director
Support Corvetteforum!
 
saplumr's Avatar
 
Member Since: Oct 2005
Location: Saint Albans, WV
Posts: 14,556
Received 1,251 Likes on 895 Posts

Default

I’ve got a Spec super twin carbon. Pretty difficult to break in but it’s good for me.
Old 09-21-2018, 04:34 AM
  #4  
foxie
Intermediate
 
foxie's Avatar
 
Member Since: Feb 2017
Location: London
Posts: 27
Received 0 Likes on 0 Posts
Default

I recently fitted a Monster LT1-S twin disk, (rated 700 rwhp/rwtq) very driveable round town they also do the LT1-SC rated 1000 rwhp/rwtq
Old 09-21-2018, 02:51 PM
  #5  
AdamPonty
Intermediate
 
AdamPonty's Avatar
 
Member Since: Apr 2018
Location: Phoenix Suburbs
Posts: 31
Received 4 Likes on 4 Posts
Default

I'm still on the stock clutch since I don't run it hard and i'm stock. But, I have heard great things about the McCLeod RXT.

-Adam
Old 09-22-2018, 06:08 PM
  #6  
Patriot Six
Drifting
 
Patriot Six's Avatar
 
Member Since: Jun 2016
Location: Temecula, CA
Posts: 1,291
Received 219 Likes on 209 Posts
Default

Mantic twin has been great on the street at 837whp.
Old 09-22-2018, 06:23 PM
  #7  
foxie
Intermediate
 
foxie's Avatar
 
Member Since: Feb 2017
Location: London
Posts: 27
Received 0 Likes on 0 Posts
Default

Originally Posted by AdamPonty
I'm still on the stock clutch since I don't run it hard and i'm stock. But, I have heard great things about the McCLeod RXT.

-Adam
My stock clutch has been run very hard at evey opportunity, and at 620bhp, it was the release bearing support that failed (after 26k miles and 12 years) and therefore had to be change it. It's very capable apart from, on the z06, as it suffered from the high revving pedal non return issue. Otherwise, and surprisingly, there was plenty of "meat" left on the friction plates.

Get notified of new replies

To Clutch suggestions




Quick Reply: Clutch suggestions



All times are GMT -4. The time now is 02:40 AM.