MSD AirForce Intake Manifold for LS7 | BEST Price & FREE Shipping | JDP Motorsports
#1
Former Vendor
Thread Starter
MSD AirForce Intake Manifold for LS7 | BEST Price & FREE Shipping | JDP Motorsports
JDP Motorsports is proud to offer MSD AirForce Intake Manifolds for the LS7!!
MSD - LS7 AirForce Intake Manifold - 2006-2013 C6 Z06 Corvette - MSD-2701
The MSD LS7 AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines.The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting.
Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails* including MSD’s Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Features:
-Polymer material resists heat soak and minimizes weight.
-103mm Throttle bore allows the use of large throttle bodies for greater air flow.
-Direct flow path runner design promotes maximum airflow.
-Allows for the use of stock fuel rails,aftermarket rails including the Atomic LS EFI.
-The two-piece manifold design provide convenient access to the runners for porting.
-Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths.
-CARB Approved - 50 State Legal.
-Includes Free Shipping to the Lower 48!
Price: $1,018.95
ORDER HERE
Please call, email or PM us anytime with questions. Our expert staff is eager to assist you. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
801.545.4215
MSD - LS7 AirForce Intake Manifold - 2006-2013 C6 Z06 Corvette - MSD-2701
The MSD LS7 AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines.The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting.
Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails* including MSD’s Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Features:
-Polymer material resists heat soak and minimizes weight.
-103mm Throttle bore allows the use of large throttle bodies for greater air flow.
-Direct flow path runner design promotes maximum airflow.
-Allows for the use of stock fuel rails,aftermarket rails including the Atomic LS EFI.
-The two-piece manifold design provide convenient access to the runners for porting.
-Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths.
-CARB Approved - 50 State Legal.
-Includes Free Shipping to the Lower 48!
Price: $1,018.95
ORDER HERE
Please call, email or PM us anytime with questions. Our expert staff is eager to assist you. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
801.545.4215
Last edited by JDP Tech; 07-16-2018 at 05:03 PM.
#2
Former Vendor
Thread Starter
These manifolds are excellent. So excellent in fact, We run it on Frankey!
Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
888.308.6007
Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
888.308.6007
#4
Burning Brakes
Do you have any test results using and ERL 454 stroked with a ported Fast 102 vs MSD VS ported MSD
#5
Former Vendor
Thread Starter
#7
Former Vendor
Thread Starter
Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
All the best,
Jared Royce
JDP Motorsports
801.545.4215
#8
Former Vendor
Thread Starter
Bolt-On 20+ Wheel Horsepower! One of the very best Intakes on the market today!
Any questions, please feel free to give us a call today!
Best Regards,
Robert @ JDP Sales
801*545*4215
Any questions, please feel free to give us a call today!
Best Regards,
Robert @ JDP Sales
801*545*4215
#9
Former Vendor
Thread Starter
Let us know if you need any help on any projects GM related! We got the parts, the know how and an in house Dyno !
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215
#11
Former Vendor
Thread Starter
We are by the phones and computers ready to answer any questions you may have! Don't be afraid to reach out to us .
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215
#12
Former Vendor
Thread Starter
We got coupon codes for days! Let us know the part and you'll see how low we can go! Feel free to call, PM or email us at any time. Have a great day guys .
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215
#13
Former Vendor
Thread Starter
Got the best deals around! Let us know if you have any questions about our products :thumbup:. We appreciate your support and have a great weekend!
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215
#14
Former Vendor
Thread Starter
While our website is updating please feel free to call, PM or email us what item you would like and we will get you pricing . We apologize for the inconvenience and appreciate your support!
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215
#16
Former Vendor
Thread Starter
2 months until spring is here and the start of the race season . Let us know if you need some work done before then to get you ready!
Cheers,
Kayla L.
801.545.4215
Cheers,
Kayla L.
801.545.4215