ZR1 front splitter Extended/Race version in the works! Digitaly created - chime in!
#1
Platinum Supporting Vendor
Thread Starter
ZR1 front splitter Extended/Race version in the works! Digitaly created - chime in!
Hey guys
Happy to share with you our latest update on this project. Its been in a slow burner but we finally have a chance to go all out!
Based on the factory ZR1 style, the Extended/Race version splitter will be more aggressive to achieve stronger down force for the track and of course give that meaner look to your Vette. Also, we recently upgraded the development to a digital design so we are really excited to get this project going and would love to hear any input to help make it the best splitter out there.
Bellow are some our digital renders for this aggressive splitter. Any thoughts are more than welcome, lets make it happen.
More to come!
Happy to share with you our latest update on this project. Its been in a slow burner but we finally have a chance to go all out!
Based on the factory ZR1 style, the Extended/Race version splitter will be more aggressive to achieve stronger down force for the track and of course give that meaner look to your Vette. Also, we recently upgraded the development to a digital design so we are really excited to get this project going and would love to hear any input to help make it the best splitter out there.
Bellow are some our digital renders for this aggressive splitter. Any thoughts are more than welcome, lets make it happen.
More to come!
#3
Race Director
Is this the beginning of a new broken promise that drags on from March 18, 2014?
Digital photos are nice. A link to "BUY NOW" would be nicer.
Digital photos are nice. A link to "BUY NOW" would be nicer.
Last edited by WICKEDFRC; 08-03-2016 at 10:55 PM.
#4
Race Director
Suggestion: Please make TWO versions.
One as pictured above with smooth lines at the brake duct inlet; not like the extended side is a glued on extension to an original splitter.
The second mold, please make it available WITHOUT BRAKE DUCTS so it has a very clean look like that seen on true Pratt & Miller C6R splitters.
First in line for a satin/matte black extended splitter!!
No more excuses....Let's get this on the front burner and make it happen!!
One as pictured above with smooth lines at the brake duct inlet; not like the extended side is a glued on extension to an original splitter.
The second mold, please make it available WITHOUT BRAKE DUCTS so it has a very clean look like that seen on true Pratt & Miller C6R splitters.
First in line for a satin/matte black extended splitter!!
No more excuses....Let's get this on the front burner and make it happen!!
Last edited by WICKEDFRC; 08-03-2016 at 11:04 PM.
#5
Race Director
#7
Race Director
Just realized this, but by the looks of the digital mold, why do the outter front edges curve in so extremely vs extending them out to the sides a little more for greater downforce and physical appearance?
Also, the C6 Z06 has a 1" wheel well lip plastic guard. Will this splitter marry up with that? The digital mold looks almost flush at the sides. Would this not pose an aesthetic mismatch?
Also, the C6 Z06 has a 1" wheel well lip plastic guard. Will this splitter marry up with that? The digital mold looks almost flush at the sides. Would this not pose an aesthetic mismatch?
Last edited by WICKEDFRC; 08-06-2016 at 09:46 AM.
#9
Safety Car
#10
Race Director
#13
Safety Car
#14
Platinum Supporting Vendor
Thread Starter
The release date isn't available yet but we are already working with the first prototypes, we are aiming to have this splitter ready for production soon
Here are more pics with an under tray built in:
Here are more pics with an under tray built in:
The following users liked this post:
Arctic Vette (10-30-2016)