Top Flight Reproductions

For those of you who live in states that require two plates and are interested in a front mount, Top Flight Reproductions has a permanent and removable mount for the C6 and a C6 Z06 removable mount as well . We also sell the GM colored license plate frames which really dress up the front mount. The Installation is very easy, requires no lifting of the car. We have had this product out for over 2 1/2 years now and the customer satisfaction has been fantastic. We appreciate all the nice comments from you forum members who have purchased these products along with inputs for making our product better, we thank you. For those of you who haven't heard of us, check out our website at www.topflightrepro.com or give us a call at 781-305-3750 and ask for Ray. We look forward to hearing from you.

In Stock!

The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper. Installs easily without lifting the car. Requires no drilling for attachment like some others do. Our bracket is priced considerably lower than other after market solutions and is made in the USA .

All three Top Flight Reproductions front license plate brackets are in stock and ready to ship. Visit our website at www.topflightrepro.com or call 781-279-1279 and ask for Ray.

The pics below show the Top Flight Reproductions front license plate mount along with one of the new products we are now selling, the RaceMesh lower intake grille in powder coat black.

Jesus_ralliart

Placed an order for the c6 removable bracket. Hope to see it and 60 degree weather soon !

Top Flight Reproductions

Thank you for the order

Top Flight Reproductions

Jesus_ralliart

got this on the car this weekend. Great product so far

Top Flight Reproductions

Texan79423

Curious if super duty velco would work instead of the tape. Making it removable?

Top Flight Reproductions

Our removable version attaches with two wing nuts, very simple

CBRDude

I have a 2012 GS. My state requires the front plate. I'm having a hard time coming to grips with placing the OEM plate holder on the fascia of the car. The local Chevy garage told me that the OEM plate holder with just the sticky tabs will not hold the plate mount and plate and that I would have to drill the three holes in the body for a guaranteed hold. they want 90 bucks for the mounting plate too. It's cheap looking ect... I came across your set up and have a few questions. What's the difference between the base and the GS/Z06 mount? Is there a difference in the grill opening? From what I can tell your set up will allow the mount to physically touch the bottom of the grill opening, thus you supply foam tape to lessen the touch factor. If the plate gets pushed in, am I looking at screw divets in the fascia if this happens? Any in put would be greatly appreciated.

Top Flight Reproductions

The difference is the GS and Z06 have less dept in the grill area. The license plate holder is attached with VHB strips, no screws/no drilling. The bottom of the license plate bracket has a 3/8 thick foam strip to prevent any damage to the painted surface if it were to make contact, typ there is a 1/8 gap between the foam and the bumper surface

Best Regards
Peter C

JerriVette

I have this product and for states that require front plates this is the way to go...

You making anything for the upcoming tesla model 3.

Should be a big market and I'd imagine the product could be quite similiar...

Let us know..

Top Flight Reproductions

Thank you Jerri