Want Parts To Add HUD To Your C6? Get The Complete Kit From CULTRAG Performance.
#1
Premium Supporting Vendor
Thread Starter
Want Parts To Add HUD To Your C6? Get The Complete Kit From CULTRAG Performance.
Hello All,
We have put together a C6 HUD kit of our own to offer our forum friends and customers. We wanted to do it right and make it our goal to offer a complete kit so I’m finally happy to say we’ve accomplished our goal.
CULTRAG Performance C6 HUD Kit - $509.99
Click on the link below to order.
https://www.cultragfactoryparts.com/...n-kit-c6hudkit
The kit includes the following items:
GM HUD Bezel
GM HUD Switch
GM HUD Projector
GM Hardware, Including Nuts & Bolts
Custom Wiring Harness W/Splice Connectors
We also provide a complete step-by-step installation downloadable document courtesy of Corvette Forum member PCMusicGuy. Also with our custom harnesses we provide a business card of a very popular forum HUD installer in the event you have any questions or concerns before or during the installation.
We provide the instructions as a download on our website!
We have put together a C6 HUD kit of our own to offer our forum friends and customers. We wanted to do it right and make it our goal to offer a complete kit so I’m finally happy to say we’ve accomplished our goal.
CULTRAG Performance C6 HUD Kit - $509.99
Click on the link below to order.
https://www.cultragfactoryparts.com/...n-kit-c6hudkit
The kit includes the following items:
GM HUD Bezel
GM HUD Switch
GM HUD Projector
GM Hardware, Including Nuts & Bolts
Custom Wiring Harness W/Splice Connectors
We also provide a complete step-by-step installation downloadable document courtesy of Corvette Forum member PCMusicGuy. Also with our custom harnesses we provide a business card of a very popular forum HUD installer in the event you have any questions or concerns before or during the installation.
We provide the instructions as a download on our website!
__________________
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
Last edited by Gene Culley; 12-21-2019 at 07:49 PM.
#3
Le Mans Master
Just an FYI , its not a bad install , hardest part is getting the projector in under the dash ..... if you can turn a screw driver and know color codes on wires you can do it
I bought this kit from Cultrag !!! #1 for customer service
Free Bump
Dave
I bought this kit from Cultrag !!! #1 for customer service
Free Bump
Dave
#6
Safety Car
Another bump for a good vendor
I got this kit from them a couple years ago, the install went perfect, and in less than 4 hours I had HUD
Had it in use for a year or so with no issues.
I got this kit from them a couple years ago, the install went perfect, and in less than 4 hours I had HUD
Had it in use for a year or so with no issues.
#7
Premium Supporting Vendor
hank you very much for your feedback it is greatly appreciated
__________________
Patrick Trageser
CULTRAG Performance
Your one stop source featuring the true experts for all GM Parts and Accessories, Lloyd mats, SLP Performance and Hawk Brake pads!
Order Your GM Parts at www.CULTRAGfactoryparts.com
patrick@cultragperformance.com
1-484-334-8833
CULTRAG Performance
Your one stop source featuring the true experts for all GM Parts and Accessories, Lloyd mats, SLP Performance and Hawk Brake pads!
Order Your GM Parts at www.CULTRAGfactoryparts.com
patrick@cultragperformance.com
1-484-334-8833
The following users liked this post:
Jumper11 (01-18-2017)
#12
Premium Supporting Vendor
#15
#20
Racer
HUD install.
Installed the HUD the other day. It took us allot longer than the 3/4 hrs advertised. I elected to pull the steering wheel and that was not too hard except for getting the wheel puller. They have it at auto zone but requires some grinding to get into the holes. Then finding all of the attachment screws and remembering where they go is crucial. Lastly, the two electrical connectors that is on the bottom of the steering wheel must come out or you'll break the plastic. Ask me how I know!!! Anyway it's done and although the hud numbers don't match the gauge cluster exactly. It's way better than not having one at all. Oh yeah if you have a convertible like me, you have to remove the back accent piece that covers that covers the top once down. If you don't you won't get the center council out.