[ZR1] *** NEW GT6X Extreme Widebody Conversion from Supervettes LLC - Sneak Preview ***
10-10-2011, 12:55 PM
#1
Supporting Vendor
Thread Starter
*** NEW GT6X Extreme Widebody Conversion from Supervettes LLC - Sneak Preview ***
This is not FINAL, but very close to it...
Differences from the GT6X in comparison to the ZR6X:
Differences from the GT6X in comparison to the ZR6X:
- Front Nose: Wider to accommodate wider front fenders / Fresh look, without straying too far away from OEM-look.
- Front Fenders: 2.5" wider than the ZR1 vs 1.5" - however, blended more into the fenders than the ZR6X flares.
- Rear Quarters: 2.5" wider than the ZR1 vs 1.5" - however, blended more into the fenders than the ZR6X flares.
- Front Splitter will be wider all around - more aggressive.
- Rocker Panel / Side Skirts: 3-4" wider, also optional side pipe exhaust.
- Rear Exhaust Diffuser: 4-5 smaller fins, optional rear exhaust.
- Rear Bumper - wider to accommodate wider rear quarters.
- Side marker lights - OEM removed, Small LED located at seam of panels.
- Hood - Clears Magnacharger S/C, many more options as well.
- Gas Tank Cap - will be made as the round / Race style cap.
Last edited by Supervettes LLC; 03-28-2012 at 01:54 PM.
10-10-2011, 01:38 PM
#4
Supporting Vendor
Thread Starter
10-10-2011, 03:27 PM
#6
Do you have a completely list with everything that's included in the package?
How is the sound from those side pipes compared to, let's say, a stock ZR1?
- Note: I'm currently not a potential customer. I am curious, though.
10-10-2011, 06:41 PM
#7
Supporting Vendor
Thread Starter
First one is being built on a 2011 GS Convertible... with a customized Smoothline hard top (non-foldable)
- Build list will be:
- SV GT6X Extreme Front Fenders (+2.5" wider than ZR1 on each side)
- SV GT6X Extreme Rear Quarters (+2.5" wider than ZR1 on each side)
- SV GT6X Extreme Front Nose
- SV GT6X Extreme Rear Bumper
- SV GT6X Extreme Front Splitter
- SV GT6X Extreme Rear Spoiler
- SV GT6X Extreme Rocker Panel Side Skirts (side pipe exhaust / tip-bezels exit optional)
- SV GT6X Extreme Side Pipe Exhaust if Chosen
- SV GT6X Extreme Rear Diffuser
- SV GT6X Extreme Installation Kit which will include LED side marker lights
Other upgrade choices of course will be wheels/tires, interior upgrades, stereo performance, etc as always...
Last edited by Supervettes LLC; 10-27-2011 at 01:27 PM.
10-10-2011, 06:43 PM
#8
Le Mans Master
Wow!
10-12-2011, 08:30 AM
#11
These actually look pretty damned cool. I like the one with the stock looking bumper, and the NASCAR boom tubes are just plain awesome.
How much more load will the hubs take with wheels with such low offsets for people who plan on abusing their cars on a track? Will the rear bumper accept other aftermarket spoilers? Are you ever going to make a fenders with Z06/base vents?
How much more load will the hubs take with wheels with such low offsets for people who plan on abusing their cars on a track? Will the rear bumper accept other aftermarket spoilers? Are you ever going to make a fenders with Z06/base vents?
10-12-2011, 10:07 AM
#12
Supporting Vendor
Thread Starter
[QUOTE=irvbulldogs72;1578939006]These actually look pretty damned cool. I like the one with the stock looking bumper, and the NASCAR boom tubes are just plain awesome.
How much more load will the hubs take with wheels with such low offsets for people who plan on abusing their cars on a track? >> More, but exact amount is unknown. Plenty of customers track their cars. No issues.
Will the rear bumper accept other aftermarket spoilers? >> Yes. Are you ever going to make a fenders with Z06/base vents? >> Z06 vents, yes. Already can / Nobody chooses them.
How much more load will the hubs take with wheels with such low offsets for people who plan on abusing their cars on a track? >> More, but exact amount is unknown. Plenty of customers track their cars. No issues.
Will the rear bumper accept other aftermarket spoilers? >> Yes. Are you ever going to make a fenders with Z06/base vents? >> Z06 vents, yes. Already can / Nobody chooses them.
10-12-2011, 10:58 AM
#13
[QUOTE=Supervettes LLC;1578939764]
Very cool. Thank you.
These actually look pretty damned cool. I like the one with the stock looking bumper, and the NASCAR boom tubes are just plain awesome.
How much more load will the hubs take with wheels with such low offsets for people who plan on abusing their cars on a track? >> More, but exact amount is unknown. Plenty of customers track their cars. No issues.
Will the rear bumper accept other aftermarket spoilers? >> Yes. Are you ever going to make a fenders with Z06/base vents? >> Z06 vents, yes. Already can / Nobody chooses them.
How much more load will the hubs take with wheels with such low offsets for people who plan on abusing their cars on a track? >> More, but exact amount is unknown. Plenty of customers track their cars. No issues.
Will the rear bumper accept other aftermarket spoilers? >> Yes. Are you ever going to make a fenders with Z06/base vents? >> Z06 vents, yes. Already can / Nobody chooses them.
10-14-2011, 07:32 AM
#15
Race Director
Looks good from the computer generated image.....Cant wait to see real photos. IMHO, white looks bad-***, and makes me want to run right out and get a GS and this entire package. What wheels does your 4D image portray?
10-14-2011, 10:13 AM
#16
Supporting Vendor
Thread Starter
10-21-2011, 11:43 AM
#19
Supporting Vendor
Thread Starter
Body:
Nothing is set in stone, but the GT6X kit in fiberglass will run around $15k which will include the entire body, all new bi-mode side-pipe exhaust (aggressive / quite) mode , hood, diffuser, etc. This would minimumly double for carbon fiber, but will be offered. But keep in mind, even the ZR1 isn't 100% CF. Only the hood, front fenders, skirts and roof skin.
Paint and Installation:
Obviously this will vary, depending on color choice, quality, etc - but should average around $8-10k.
First one is actually being built on a 2011 Grand Sport Convertible...
Additional Mods if anyone is interested in securing it, and adding to / or deleting mods, picking a color, interior, etc... will be:
Engine / Performance
Suspension (Pfadt Aggressor II Package)
Brakes
Interior
Audio / Video System
Radar
Shall we type more???
Nothing is set in stone, but the GT6X kit in fiberglass will run around $15k which will include the entire body, all new bi-mode side-pipe exhaust (aggressive / quite) mode , hood, diffuser, etc. This would minimumly double for carbon fiber, but will be offered. But keep in mind, even the ZR1 isn't 100% CF. Only the hood, front fenders, skirts and roof skin.
Paint and Installation:
Obviously this will vary, depending on color choice, quality, etc - but should average around $8-10k.
First one is actually being built on a 2011 Grand Sport Convertible...
Additional Mods if anyone is interested in securing it, and adding to / or deleting mods, picking a color, interior, etc... will be:
Engine / Performance
- Magnacharger TVS2300
- OEM ZR1 Cam
- OEM ZR1 Clutch
Suspension (Pfadt Aggressor II Package)
- Pfadt C6 Adjustable Coil Overs
- Pfadt C6 Heavy Rate Racing Sway Bars
- Pfadt C6 Competition Pillow Blocks
- Pfadt C6 Polyurethane Control Arm Bushing/Sleeve Kit
- Pfadt C6 Camber Kit
Brakes
- OEM ZR1 Brembo Calipers
- 15.5" (F) / 15" (R) 2PC Iron / Aluminum Hat rotors
- Hawk HPS Pads
- Stainless Steel Brake Lines
Interior
- Full Ebony leather / Alcantara® interior with Titanium Stitching
- Custom Sport Steering Wheel with matching Alcantara® Accents
- Memory Foam armrests on door / Center Console
- Clean White Lighting through out
- Stainless Steel Gunmetal Custom Gauges
- 2008 Z06 Style GM/OEM Hydrocarbon Accents
- Brushed Aluminum / Illuminated GT6X Door Sills
- Brushed Aluminum Accents in all the right places
Audio / Video System
- Pioneer AVIC-Z130BT Navigation / Head Unit
- Dynaudio Esotec 3-way Component Speakers (Audiophile-Quality)
- Arc Audio Amps
- Arc Audio Digital Processor
- Arc Audio 8" Subs in Custom Fabricated Stealth boxes
- Stinger Wiring
- Audiovox Premium Backup and "Front Splitter" Cameras
Radar
- Escort Passport 9500ci Integrated Radar
- Escort Passport Laser Shifters
Shall we type more???
10-22-2011, 02:14 AM
#20
Intermediate
I have a 2005 Z51 that I am more than willing to let you borrow so that you can make sure all the parts fit on a 05 coupe. Plus when your done I can promote you out here on the west coast with it. See its a Win Win!!