[Z06] *** The Official C6 Z06 DIY Thread ***UPDATED 08/25/13**
#22
Team Owner
did a little cleanup....anyone have more stuff to add????
#25
Team Owner
#26
Team Owner
#29
Fix intermittent/dead low beam headlights (recent GM recall):
https://www.corvetteforum.com/forums...post1582973586
https://www.corvetteforum.com/forums...post1582973586
#31
Pro
Here are a few some might find of interest:
- Android Head Unit & Backup Camera
- Bimode Exhaust Valve Closure Adjustment
- Bimode Exhaust Activation RPM Adjustment
- 2011 Exhaust Swap & Sound Comparison
- DIC Pod Light Bulb Replacement
- Oil Pre-heater and Cooler Cover
- Oil Cooler Thermostat
- Crowdsourced Map of LS7 Engine Valve Wiggle Testers
(and my results at 62k miles)
Last edited by bjmsam; 03-05-2018 at 07:02 PM.
#32
Melting Slicks
DYI Cam
This link should be in here. Great write up by rpmextra.
https://www.corvetteforum.com/forums...full-pics.html
This link should be in here. Great write up by rpmextra.
https://www.corvetteforum.com/forums...full-pics.html
Last edited by Kouasupra; 11-13-2015 at 11:35 PM.
The following users liked this post:
erufle (09-15-2017)
#34
Aftermarket??
Purchased this 2008 Z06 and curious on the carbon look engine covers and intake, and orange paint. Either this was an option I have never seen, or someone did it after market. Which then makes me wonder what else might have been done. Thanks for any confirmation!
The following users liked this post:
bart3 (01-20-2022)