[Z06] 345/35 18 Mickey Thompson Tires and rims pics
#1
Racer
Thread Starter
Member Since: Aug 2008
Location: Orlando Area FL
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
345/35 18 Mickey Thompson Tires and rims pics
When I researched this before I couldn't find anything so here it is. They are repro 18x12 with 345/35 18. No rubbing and they hook up sooo much better and a lot less sway than 345/30 19 NT05R's.
#4
Burning Brakes
Member Since: Oct 2008
Location: Morgantown WV
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
I've got the same size in M&H's. At first they looked weird but then I started to like them. The 28" tall tire hurts the gearing some and I never ran a good time with them. Good for the street though.
The following users liked this post:
mr056 (04-19-2018)
#6
Burning Brakes
Very large shoes, they should hold you very well
#11
Racer
Thread Starter
Member Since: Aug 2008
Location: Orlando Area FL
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
These are only .36 inches bigger than my old ones, making the new tire sit at 27.5 inches. I haven't gone to the track yet, so we will have to see.
#13
Le Mans Master
i had the 28" tall M&H version... holy big tire batman! but she hooked my 570rwhp with no problems...
yours looks great man! enjoy the new found traction!
yours looks great man! enjoy the new found traction!
#14
i had the same setup too, blk car/wheels everything. they hook great but they are heavy(70lbs-wheel/tire) and are too much for only 540rwhp. i run a c5z rear wheel & 315/18 dr(50lbs) and its 25.5 in tall-does not look as nasty as the 345 setup tho
#15
Racer
Thread Starter
Member Since: Aug 2008
Location: Orlando Area FL
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
#16
Le Mans Master
Looks good and beefy. I'll reitterate you just slowed your car down with heavy wheel/tire combo and too tall. If you have 800+rwhp then go for it!!!!!! If you are under 575rwhp a 315/30/17 is all you need tops IMO.
#17
Racer
Thread Starter
Member Since: Aug 2008
Location: Orlando Area FL
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Sheww, barely made it at 580 rwhp, lol. Thanks for the input, but I would rather be confident with hooking up rather than letting loose on a 2-3 shift. I didn't think a 17" fit around Z06 rotors?
Last edited by USCGREEL; 01-16-2012 at 07:34 PM.
#18
Drifting
#19
Le Mans Master
17's absolutely fit
Weld RTS 17x11s no modifications to fit.
OEM Grandsport 17x11s fit no modifications
#20
Advanced