Notices
C6 Corvette ZR1 & Z06 General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: Kraken

[Z06] 2006 Z06 vs 2008 Z06

Thread Tools
 
Search this Thread
 
Old 02-07-2012, 01:49 PM
  #41  
VetteVinnie
Le Mans Master
Support Corvetteforum!
 
VetteVinnie's Avatar
 
Member Since: May 2005
Location: Cypress TX
Posts: 7,418
Received 1,659 Likes on 1,063 Posts

Default

Originally Posted by JoesC5
Remembered a couple of additional items that added weight over the 2006. The 2006 had the lightweight polycarbonate roof panel(that would fly off further reducing the car's weight). The later Z06's had the heavier SMC roof panel, that increased weight around 4-5 pounds. Of course, if you had the recall done on the roof, then your 2006 would now have the heavy roof panel.

Some changes made in the transmission and differential housings increased weight because of additional material added to increase strength and heavier axles to increase their strength.

A couple of pounds here and a couple of pounds there add up to the 43 pound increase, but most of that weight is beneficial.
The roof recall had nothing to do with the material in the roof panel. It had to do with the adhesive. The fix for the dealers was to re-adhere the existing panel, not replace it. Are you sure about your data? I had the roof recall done on my 2006 Coupe after the roof delaminated.
Old 02-07-2012, 01:56 PM
  #42  
CTYANK2
Cruising is the passion!
Support Corvetteforum!
 
CTYANK2's Avatar
 
Member Since: Jan 2003
Location: SIMSBURY CT
Posts: 6,140
Received 304 Likes on 213 Posts
St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24


Default

My 2006 roof was definitely replaced. Not sure what it was replaced with.
Old 02-07-2012, 02:11 PM
  #43  
JoesC5
Team Owner
 
JoesC5's Avatar
 
Member Since: Sep 1999
Location: Springfield MO
Posts: 41,733
Received 1,699 Likes on 1,213 Posts

Default

Originally Posted by EViL427
The roof recall had nothing to do with the material in the roof panel. It had to do with the adhesive. The fix for the dealers was to re-adhere the existing panel, not replace it. Are you sure about your data? I had the roof recall done on my 2006 Coupe after the roof delaminated.
First recall was to inject an adhesive foam. That failed to correct the problem. A second recall was to replace the polycarbonate panel with a SMC panel. NHTSA Campaign ID Number 09V491000. Since then ALL(except those with the Carbon fiber roof) C6's with the painted roof panel have the SMC material(and the extra weight).



NHTSA recall 09V491000

Component: STRUCTURE:BODY:ROOF AND PILLARS
Date Owner Notified: 2010-04-21
Date Created: 2009-12-23
Manufacturer: GENERAL MOTORS CORP.
Production dates (end): 2006-08-31
Production dates (start): 2004-03-01
Description: GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2007 CORVETTE VEHICLES EQUIPPED WITH A REMOVABLE ROOF AND MODEL YEAR 2006 AND 2007 CORVETTE Z06 VEHICLES. THE ADHESIVE BETWEEN THE ROOF PANEL AND THE FRAME MAY SEPARATE. IF THERE IS A PARTIAL SEPARATION, THE DRIVER MAY NOTICE ONE OR MORE SYMPTOMS, SUCH AS A SNAPPING NOISE WHEN DRIVING OVER BUMPS, WIND NOISE, POOR ROOF PANEL FIT, ROOF PANEL MOVEMENT/BOUNCE WHEN A DOOR OR HATCH IS CLOSED, OR A WATER LEAK IN THE HEADLINER.
Consequences: IF THERE IS A COMPLETE SEPARATION, THE ROOF PANEL MAY DETACH FROM THE VEHICLE. IF THIS WERE TO OCCUR WHILE THE VEHICLE WAS BEING DRIVEN, IT COULD STRIKE A FOLLOWING VEHICLE AND CAUSE INJURY AND/OR PROPERTY DAMAGE.
Action: DEALERS WILL INSTALL A NEW DESIGN ROOF PANEL FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING APRIL 2010. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438 OR AT WWW.GMOWNERCENTER.COM.
Notes: GM SAFETY RECALL NO. 090230.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Units affected: 22090
2006 CHEVROLET CORVETTE
Component: STRUCTURE:BODY:ROOF AND PILLARS
Date Owner Notified: 2010-04-21
Date Created: 2009-12-23
Manufacturer: GENERAL MOTORS CORP.
Production dates (end): 2006-08-31
Production dates (start): 2004-03-01
Description: GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2007 CORVETTE VEHICLES EQUIPPED WITH A REMOVABLE ROOF AND MODEL YEAR 2006 AND 2007 CORVETTE Z06 VEHICLES. THE ADHESIVE BETWEEN THE ROOF PANEL AND THE FRAME MAY SEPARATE. IF THERE IS A PARTIAL SEPARATION, THE DRIVER MAY NOTICE ONE OR MORE SYMPTOMS, SUCH AS A SNAPPING NOISE WHEN DRIVING OVER BUMPS, WIND NOISE, POOR ROOF PANEL FIT, ROOF PANEL MOVEMENT/BOUNCE WHEN A DOOR OR HATCH IS CLOSED, OR A WATER LEAK IN THE HEADLINER.
Consequences: IF THERE IS A COMPLETE SEPARATION, THE ROOF PANEL MAY DETACH FROM THE VEHICLE. IF THIS WERE TO OCCUR WHILE THE VEHICLE WAS BEING DRIVEN, IT COULD STRIKE A FOLLOWING VEHICLE AND CAUSE INJURY AND/OR PROPERTY DAMAGE.
Action: DEALERS WILL INSTALL A NEW DESIGN ROOF PANEL FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING APRIL 2010. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438 OR AT WWW.GMOWNERCENTER.COM.
Notes: GM SAFETY RECALL NO. 090230.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Units affected: 22090
2006 CHEVROLET CORVETTE Z06
Component: STRUCTURE:BODY:ROOF AND PILLARS
Date Owner Notified: 2010-04-21
Date Created: 2009-12-23
Manufacturer: GENERAL MOTORS CORP.
Production dates (end): 2006-08-31
Production dates (start): 2005-04-01
Description: GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2007 CORVETTE VEHICLES EQUIPPED WITH A REMOVABLE ROOF AND MODEL YEAR 2006 AND 2007 CORVETTE Z06 VEHICLES. THE ADHESIVE BETWEEN THE ROOF PANEL AND THE FRAME MAY SEPARATE. IF THERE IS A PARTIAL SEPARATION, THE DRIVER MAY NOTICE ONE OR MORE SYMPTOMS, SUCH AS A SNAPPING NOISE WHEN DRIVING OVER BUMPS, WIND NOISE, POOR ROOF PANEL FIT, ROOF PANEL MOVEMENT/BOUNCE WHEN A DOOR OR HATCH IS CLOSED, OR A WATER LEAK IN THE HEADLINER.
Consequences: IF THERE IS A COMPLETE SEPARATION, THE ROOF PANEL MAY DETACH FROM THE VEHICLE. IF THIS WERE TO OCCUR WHILE THE VEHICLE WAS BEING DRIVEN, IT COULD STRIKE A FOLLOWING VEHICLE AND CAUSE INJURY AND/OR PROPERTY DAMAGE.
Action: DEALERS WILL INSTALL A NEW DESIGN ROOF PANEL FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING APRIL 2010. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438 OR AT WWW.GMOWNERCENTER.COM.
Notes: GM SAFETY RECALL NO. 090230.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Units affected: 22090
2007 CHEVROLET CORVETTE
Component: STRUCTURE:BODY:ROOF AND PILLARS
Date Owner Notified: 2010-04-21
Date Created: 2009-12-23
Manufacturer: GENERAL MOTORS CORP.
Production dates (end): 2006-08-31
Production dates (start): 2004-03-01
Description: GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2007 CORVETTE VEHICLES EQUIPPED WITH A REMOVABLE ROOF AND MODEL YEAR 2006 AND 2007 CORVETTE Z06 VEHICLES. THE ADHESIVE BETWEEN THE ROOF PANEL AND THE FRAME MAY SEPARATE. IF THERE IS A PARTIAL SEPARATION, THE DRIVER MAY NOTICE ONE OR MORE SYMPTOMS, SUCH AS A SNAPPING NOISE WHEN DRIVING OVER BUMPS, WIND NOISE, POOR ROOF PANEL FIT, ROOF PANEL MOVEMENT/BOUNCE WHEN A DOOR OR HATCH IS CLOSED, OR A WATER LEAK IN THE HEADLINER.
Consequences: IF THERE IS A COMPLETE SEPARATION, THE ROOF PANEL MAY DETACH FROM THE VEHICLE. IF THIS WERE TO OCCUR WHILE THE VEHICLE WAS BEING DRIVEN, IT COULD STRIKE A FOLLOWING VEHICLE AND CAUSE INJURY AND/OR PROPERTY DAMAGE.
Action: DEALERS WILL INSTALL A NEW DESIGN ROOF PANEL FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING APRIL 2010. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438 OR AT WWW.GMOWNERCENTER.COM.
Notes: GM SAFETY RECALL NO. 090230.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .
Units affected: 22090
2007 CHEVROLET CORVETTE Z06
Component: STRUCTURE:BODY:ROOF AND PILLARS
Date Owner Notified: 2010-04-21
Date Created: 2009-12-23
Manufacturer: GENERAL MOTORS CORP.
Production dates (end): 2006-08-31
Production dates (start): 2005-04-01
Description: GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2007 CORVETTE VEHICLES EQUIPPED WITH A REMOVABLE ROOF AND MODEL YEAR 2006 AND 2007 CORVETTE Z06 VEHICLES. THE ADHESIVE BETWEEN THE ROOF PANEL AND THE FRAME MAY SEPARATE. IF THERE IS A PARTIAL SEPARATION, THE DRIVER MAY NOTICE ONE OR MORE SYMPTOMS, SUCH AS A SNAPPING NOISE WHEN DRIVING OVER BUMPS, WIND NOISE, POOR ROOF PANEL FIT, ROOF PANEL MOVEMENT/BOUNCE WHEN A DOOR OR HATCH IS CLOSED, OR A WATER LEAK IN THE HEADLINER.
Consequences: IF THERE IS A COMPLETE SEPARATION, THE ROOF PANEL MAY DETACH FROM THE VEHICLE. IF THIS WERE TO OCCUR WHILE THE VEHICLE WAS BEING DRIVEN, IT COULD STRIKE A FOLLOWING VEHICLE AND CAUSE INJURY AND/OR PROPERTY DAMAGE.
Action: DEALERS WILL INSTALL A NEW DESIGN ROOF PANEL FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING APRIL 2010. OWNERS MAY CONTACT CHEVROLET AT 1-800-630-2438 OR AT WWW.GMOWNERCENTER.COM.
Notes: GM SAFETY RECALL NO. 090230.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .

Last edited by JoesC5; 02-07-2012 at 02:32 PM.
Old 02-12-2012, 10:10 PM
  #44  
rjwz28
Safety Car
 
rjwz28's Avatar
 
Member Since: Sep 2007
Location: Sunniest city on Earth
Posts: 4,169
Likes: 0
Received 21 Likes on 20 Posts

Default

Originally Posted by JoesC5
First recall was to inject an adhesive foam. That failed to correct the problem. A second recall was to replace the polycarbonate panel with a SMC panel. NHTSA Campaign ID Number 09V491000. Since then ALL(except those with the Carbon fiber roof) C6's with the painted roof panel have the SMC material(and the extra weight).
Old 05-18-2015, 04:52 PM
  #45  
timmyZ06
Le Mans Master
 
timmyZ06's Avatar
 
Member Since: Jul 2010
Location: montreal quebec
Posts: 5,424
Received 262 Likes on 215 Posts

Default

this thread is old!
Old 05-18-2015, 06:54 PM
  #46  
MUKAK
Race Director
 
MUKAK's Avatar
 
Member Since: Nov 2003
Location: Menifee CA
Posts: 11,034
Received 34 Likes on 34 Posts

Default

Originally Posted by timmyZ06
this thread is old!
why did u bump it then??
The following users liked this post:
Noblebro175 (11-03-2022)
Old 05-18-2015, 07:45 PM
  #47  
Josh B.
Melting Slicks
 
Josh B.'s Avatar
 
Member Since: Nov 2014
Location: Granite Falls, WA
Posts: 2,569
Received 554 Likes on 400 Posts
Default

Originally Posted by JoesC5
Very seldom does a change make a problem worse then what it was before they tried to improve it(but there are exceptions, and then they try and fix the fix).
C7Z...so much "improvement" in one car that it went full retard.
Old 05-18-2015, 07:47 PM
  #48  
Josh B.
Melting Slicks
 
Josh B.'s Avatar
 
Member Since: Nov 2014
Location: Granite Falls, WA
Posts: 2,569
Received 554 Likes on 400 Posts
Default

Originally Posted by MUKAK
why did u bump it then??
Memories Monday?
Old 05-22-2015, 01:24 PM
  #49  
rjwz28
Safety Car
 
rjwz28's Avatar
 
Member Since: Sep 2007
Location: Sunniest city on Earth
Posts: 4,169
Likes: 0
Received 21 Likes on 20 Posts

Default

Originally Posted by timmyZ06
this thread is old!
Old 05-24-2015, 10:20 AM
  #50  
TwoSmoke
Team Owner
 
TwoSmoke's Avatar
 
Member Since: May 2010
Location: Sugarcane town Florida
Posts: 20,596
Received 126 Likes on 78 Posts

Default

HA. Didn't notice the old date until I read the whole thread.

Still enjoyed the read though. Since I want to buy a C6Z probably next year.

I didn't see anyone mention the 2009 had the rear hatch assist added. This also added weight. If I'm correct?

Not sure the rear hatch assist is really worth it though. I don't know because I only own a C5 FRC.....with a trunk hatch.

The 06 and 07's are in my price range. Although I have seen high mileage (100,000 plus) 09's for a low price that I might consider...even with all the added weight.
Old 05-25-2015, 11:38 AM
  #51  
jburt
Instructor
 
jburt's Avatar
 
Member Since: Jun 2010
Posts: 103
Received 0 Likes on 0 Posts
Default

When I was looking the most important thing to me was to find one with the head issue already addressed by a reputable shop and was a 2LZ. I didn't want to buy a car and immediately take it to get the heads done. I just couldn't drive one and risk it grenading. Just my personal opinion. I ended up with a 09 2LZ for the record!
Old 05-25-2015, 12:11 PM
  #52  
LFZ
Team Owner
 
LFZ's Avatar
 
Member Since: Feb 2003
Location: Lake Norman NC
Posts: 30,205
Received 310 Likes on 227 Posts

Default

Originally Posted by jburt
When I was looking the most important thing to me was to find one with the head issue already addressed by a reputable shop and was a 2LZ. I didn't want to buy a car and immediately take it to get the heads done. I just couldn't drive one and risk it grenading. Just my personal opinion. I ended up with a 09 2LZ for the record!
LOL
Old 05-26-2015, 06:41 AM
  #53  
rjwz28
Safety Car
 
rjwz28's Avatar
 
Member Since: Sep 2007
Location: Sunniest city on Earth
Posts: 4,169
Likes: 0
Received 21 Likes on 20 Posts

Default

Originally Posted by jburt
When I was looking the most important thing to me was to find one with the head issue already addressed by a reputable shop and was a 2LZ. I didn't want to buy a car and immediately take it to get the heads done. I just couldn't drive one and risk it grenading. Just my personal opinion. I ended up with a 09 2LZ for the record!
If I got one, I'd just budget for heads right off the bat
Old 10-31-2022, 09:09 PM
  #54  
Chris.Z06
1st Gear
 
Chris.Z06's Avatar
 
Member Since: Oct 2022
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 2K6Z06
Ok so I had decided to purchase a Z06 after considering a Porsche Cayman and M3. I found the perfect Z06 (2006) with only 6k miles and I thought I had a deal. Long story short, deal fell through and now that I have spent some time looking through this forum I have concerns about the 2006 and 2007 models.

Can anyone explain the differences that 2008 brings? I know there is a transmisison change but not sure if thats good or bad and I would lose the options of GMPP.


What else changed in 08? Thanks in advance!

i have a question. So i own a 2008 z06. Bought a torque tube that was on a 2006-07 z06 and its an inch shorter. Is that right because i figured they would both be the same length considering they are both z06’s.
Old 10-31-2022, 09:17 PM
  #55  
VetteVinnie
Le Mans Master
Support Corvetteforum!
 
VetteVinnie's Avatar
 
Member Since: May 2005
Location: Cypress TX
Posts: 7,418
Received 1,659 Likes on 1,063 Posts

Default

Originally Posted by Chris.Z06
i have a question. So i own a 2008 z06. Bought a torque tube that was on a 2006-07 z06 and its an inch shorter. Is that right because i figured they would both be the same length considering they are both z06’s.
Different transmission. 2006-2007 had the T56. 2008+ have the TR6060. Whether or not that makes up a difference of 1", I'm not certain, but it's a good place to start.
Old 11-01-2022, 02:24 AM
  #56  
GettnBetter
Pro
 
GettnBetter's Avatar
 
Member Since: Mar 2007
Posts: 552
Received 95 Likes on 72 Posts

Default

Originally Posted by Unreal
No roof issues once the recall is done. They replace everything and your roof will be just like an 08+ once it is done.

Get whatever you can get a good deal on IMO. I think the 06-07s are the ones to buy because of the lower cost. With the $5-7k you save you can do a clutch, cam, heads, headers, etc and be having a lot more fun.
The roof recall was a nightmare for me. Finally just fixed it myself. The dealer that did my recall stripped the passenger side rear bolt and the left side actually fell apart as I heard the washes fall to the floor. It creaked wildly too. Not every dealer performs recalls reliably.
Old 11-01-2022, 11:44 AM
  #57  
MTPZ06
Team Owner
Support Corvetteforum!
 
MTPZ06's Avatar
 
Member Since: Dec 2008
Location: Honolulu HI
Posts: 35,883
Received 1,592 Likes on 1,335 Posts

Default

Originally Posted by timmyZ06
this thread is old!
It's now older.

Get notified of new replies

To 2006 Z06 vs 2008 Z06

Old 11-01-2022, 01:00 PM
  #58  
VetteVinnie
Le Mans Master
Support Corvetteforum!
 
VetteVinnie's Avatar
 
Member Since: May 2005
Location: Cypress TX
Posts: 7,418
Received 1,659 Likes on 1,063 Posts

Default

Originally Posted by MTPZ06
It's now older.
Memories Monday, 2022 edition.
Old 11-01-2022, 01:32 PM
  #59  
dmuellenberg
Melting Slicks
 
dmuellenberg's Avatar
 
Member Since: Mar 2006
Location: Woodbury MN
Posts: 2,088
Received 177 Likes on 119 Posts

Default

Originally Posted by GettnBetter
The roof recall was a nightmare for me. Finally just fixed it myself. The dealer that did my recall stripped the passenger side rear bolt and the left side actually fell apart as I heard the washes fall to the floor. It creaked wildly too. Not every dealer performs recalls reliably.
Why are you commenting on a thread that is 7 years old?
Old 11-01-2022, 02:19 PM
  #60  
VetteVinnie
Le Mans Master
Support Corvetteforum!
 
VetteVinnie's Avatar
 
Member Since: May 2005
Location: Cypress TX
Posts: 7,418
Received 1,659 Likes on 1,063 Posts

Default

Originally Posted by dmuellenberg
Why are you commenting on a thread that is 7 years old?
Because a legitimate question was asked? I was one of the original participants in this thread a decade ago, and I have no problem with it. Sometimes it's nice to have that trip down memory lane.
The following 4 users liked this post by VetteVinnie:
CTYANK2 (11-01-2022), iw172 (11-01-2022), Noblebro175 (11-03-2022), Pacha's Z06 RF (11-03-2022)


Quick Reply: [Z06] 2006 Z06 vs 2008 Z06



All times are GMT -4. The time now is 12:50 PM.