[Z06] Help with gauge cluster/gauge overlay install
#1
Burning Brakes
Thread Starter
Member Since: Feb 2011
Location: millstone NJ
Posts: 979
Likes: 0
Received 0 Likes
on
0 Posts
Help with gauge cluster/gauge overlay install
I bought a set of gauge overlays and only want to do my tach. does anyone know how to remove gauge cluster/install gauge overlays or have a link to it? thanks
#2
Team Owner
Here's a DIY:
http://forums.corvetteforum.com/c6-c...many-pics.html
Caution note, the needles "can be" a challenge to remove without damaging something. Most seem to be cooperative but there have been a few bad stories posted. So just for FYI here's one person's suggestion for needle removal just to give you an idea:
http://forums.corvetteforum.com/1578312570-post4.html
http://forums.corvetteforum.com/c6-c...many-pics.html
Caution note, the needles "can be" a challenge to remove without damaging something. Most seem to be cooperative but there have been a few bad stories posted. So just for FYI here's one person's suggestion for needle removal just to give you an idea:
http://forums.corvetteforum.com/1578312570-post4.html
#3
Burning Brakes
Thread Starter
Member Since: Feb 2011
Location: millstone NJ
Posts: 979
Likes: 0
Received 0 Likes
on
0 Posts
Here's a DIY:
http://forums.corvetteforum.com/c6-c...many-pics.html
Caution note, the needles "can be" a challenge to remove without damaging something. Most seem to be cooperative but there have been a few bad stories posted. So just for FYI here's one person's suggestion for needle removal just to give you an idea:
http://forums.corvetteforum.com/1578312570-post4.html
http://forums.corvetteforum.com/c6-c...many-pics.html
Caution note, the needles "can be" a challenge to remove without damaging something. Most seem to be cooperative but there have been a few bad stories posted. So just for FYI here's one person's suggestion for needle removal just to give you an idea:
http://forums.corvetteforum.com/1578312570-post4.html