[ZR1] LG Motorsports ZR1 ForgeLine track wheel and tire package
#1
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
LG Motorsports ZR1 ForgeLine track wheel and tire package
Hey guys,
Take what we have found over the last two years of on track R&D with our own in house winning ZR1.
This year we wrapped the car in Forgeline's latest GA3R wheel in a 19x10.5 front and 19x13 rear. Covering those lovely wheels are Hoosier sticky 315/30/19 front tires and 345/30/19 rears.
Built with ForgeLine's most up-to-date CNC process these lightweight I beam spokes are just what you need to cover those massive 15.5" rotors.
Shown above with a polished lip, Titanium center w/o center caps.
If you have any questions or would like a quote on a set for your ZR1 or any other Corvette please let me know. Always happy to help.
Take what we have found over the last two years of on track R&D with our own in house winning ZR1.
This year we wrapped the car in Forgeline's latest GA3R wheel in a 19x10.5 front and 19x13 rear. Covering those lovely wheels are Hoosier sticky 315/30/19 front tires and 345/30/19 rears.
Built with ForgeLine's most up-to-date CNC process these lightweight I beam spokes are just what you need to cover those massive 15.5" rotors.
Shown above with a polished lip, Titanium center w/o center caps.
If you have any questions or would like a quote on a set for your ZR1 or any other Corvette please let me know. Always happy to help.
#9
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
As it is shown above the front wheels were 22.8lbs each and the rears were 21.2 lbs each.
Rears are lighter due to the smaller hub pad as it doesn't have as much brake to clear.
Cost depends on options, sizes, and finish. PM me for exact pricing.
Anthony
Rears are lighter due to the smaller hub pad as it doesn't have as much brake to clear.
Cost depends on options, sizes, and finish. PM me for exact pricing.
Anthony
#12
Drifting
Nice looking wheels!
#15
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
With the Hoosiers on the car The fronts are 53 lbs each, and the rears are 51 lbs each. Again fully assembled with sensors....best I can recall.
So you can drop a solid 36-40 lbs off the car.
#20
Drifting
I'm not sure if I had mine on my car when you got to see it but Anthony from LG provided me with GA1R's in 18" front and rear that clear. GA3R's as pictured above are the other choice which Mike MikyMu is running on his car. Both of these will clear the big carbon ceramic brakes if you decide to go that route later down the road too. If you have any questions just call Anthony at LG, he knows everything about Forgeline wheels and is real easy to deal with and a straight shooter.