FS: 2017 Grand Sport Collectors Edition 7M
04-24-2017, 08:53 PM
#1
Intermediate
Thread Starter
FS or Trade: 2017 Grand Sport Collectors Edition 7M
UPDATE: The car is sold. Thanks all! I purchased this car new and took delivery in early Feb 2017. It went straight to www.arpremier.com where the whole car was wrapped in 10 year LLumar and the windows tinted with their top of the line ceramic tint at a cost of $5,000. The car was gently and properly broken in with speed varied and always < 3,500 rpm. If you aren't familiar with the Collector's edition they are hard loaded. (see sticker) Only 1,000 were produced and 150 were exported so you don't see one everyday. (she is #306) Right now she is at 5,500 miles +/-
The car has been well cared for and never tracked. I am located in central Arkansas.
62,900 firm
Thanks,
Jeff
The car has been well cared for and never tracked. I am located in central Arkansas.
62,900 firm
Thanks,
Jeff
Last edited by Lumberhawg; 02-26-2019 at 04:47 PM. Reason: Ready to sell
04-25-2017, 09:16 PM
#3
Intermediate
Thread Starter
Thanks, truly hate to sell but would rather do it now while it is a choice...
Best,
Jeff
Best,
Jeff
Last edited by Steve Garrett; 04-26-2017 at 02:35 AM.
04-26-2017, 08:17 PM
#5
Intermediate
Thread Starter
06-01-2017, 07:43 PM
#6
Melting Slicks
Glad you're still planning to stick with a Corvette!
I updated the Collector Edition Registry with this cars information, I have it listed in the Used Listings tab as well, not sure if it will increase your visibility of the sale or not, but can't hurt!
When it does change hands, let the new buyer know about the registry post in the Corvette Forum and we can update it with the location that it finally lands.
You can also check the registry for automatics for sale, maybe you can get a dealer to do a swap for you. There are plenty of these sitting in dealer lots right now and they have been around for a while.
I see a base model automatic GSCE sitting at Allen Tillery in Hot Springs, AR. That car was built in early February so they have had it for a little bit. Can't hurt to ask them what they would do for you :-)
Best of luck to you!
I updated the Collector Edition Registry with this cars information, I have it listed in the Used Listings tab as well, not sure if it will increase your visibility of the sale or not, but can't hurt!
When it does change hands, let the new buyer know about the registry post in the Corvette Forum and we can update it with the location that it finally lands.
You can also check the registry for automatics for sale, maybe you can get a dealer to do a swap for you. There are plenty of these sitting in dealer lots right now and they have been around for a while.
I see a base model automatic GSCE sitting at Allen Tillery in Hot Springs, AR. That car was built in early February so they have had it for a little bit. Can't hurt to ask them what they would do for you :-)
Best of luck to you!
06-01-2017, 09:33 PM
#7
Intermediate
Thread Starter
Glad you're still planning to stick with a Corvette!
I updated the Collector Edition Registry with this cars information, I have it listed in the Used Listings tab as well, not sure if it will increase your visibility of the sale or not, but can't hurt!
When it does change hands, let the new buyer know about the registry post in the Corvette Forum and we can update it with the location that it finally lands.
You can also check the registry for automatics for sale, maybe you can get a dealer to do a swap for you. There are plenty of these sitting in dealer lots right now and they have been around for a while.
I see a base model automatic GSCE sitting at Allen Tillery in Hot Springs, AR. That car was built in early February so they have had it for a little bit. Can't hurt to ask them what they would do for you :-)
Best of luck to you!
I updated the Collector Edition Registry with this cars information, I have it listed in the Used Listings tab as well, not sure if it will increase your visibility of the sale or not, but can't hurt!
When it does change hands, let the new buyer know about the registry post in the Corvette Forum and we can update it with the location that it finally lands.
You can also check the registry for automatics for sale, maybe you can get a dealer to do a swap for you. There are plenty of these sitting in dealer lots right now and they have been around for a while.
I see a base model automatic GSCE sitting at Allen Tillery in Hot Springs, AR. That car was built in early February so they have had it for a little bit. Can't hurt to ask them what they would do for you :-)
Best of luck to you!
Thank you very much, I did not know the group existed. I have re-worded my post and we will see what happens. I know better than to try to trade; it has never worked for me since I had enough money / credit that trading was not necessary, but if any dealers out there want to prove me wrong feel free to contact me!
06-02-2017, 04:31 PM
#8
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,347
Received 7,751 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Jeff, please put a For Sale price on this!
06-02-2017, 04:41 PM
#9
Intermediate
Thread Starter
06-18-2017, 12:33 PM
#10
Melting Slicks
Just tracking this as I have this as used / for sale in the registry. Is that still the case and did you determine a price or still just looking to trade?
06-19-2017, 09:23 AM
#11
Melting Slicks
Sounds good. If you think of it, send me a PM letting me know if you pull it and I'll remove it from the used listings.
06-19-2017, 11:06 PM
#12
Intermediate
Thread Starter
10-01-2017, 02:32 PM
#14
Melting Slicks
Thats fine, I was going through and updating the used listing in the registry and didn't want to keep it up there unless you wanted it :-)
BTW, not sure if I mentioned this before but #504 is sitting over at Allen Tillery in Hot Springs AR. Not sure if that is a long distance or not.... But figured it probably couldn't hurt to check with them, your cars are configured just about identical, except this is an A8 car. You have the wrap and tint done, which may help you out a little...they have had that car since February and might be willing to try to move it?
BTW, not sure if I mentioned this before but #504 is sitting over at Allen Tillery in Hot Springs AR. Not sure if that is a long distance or not.... But figured it probably couldn't hurt to check with them, your cars are configured just about identical, except this is an A8 car. You have the wrap and tint done, which may help you out a little...they have had that car since February and might be willing to try to move it?
Last edited by Steve Garrett; 10-01-2017 at 05:41 PM. Reason: Merged Posts
10-02-2017, 02:08 PM
#15
Burning Brakes
Best to you in finding a auto. I love my Collector conv. auto. Great car.
The following users liked this post:
Lumberhawg (04-26-2018)
10-02-2017, 02:58 PM
#16
Advanced
It's a great combo of features. I know what that particular arthritis feels like; I will probably go for an auto too. We don't want what we love to cause us pain. I wish you well!
The following users liked this post:
Lumberhawg (04-26-2018)
10-23-2017, 03:56 PM
#18
Le Mans Master
Member Since: Jan 2006
Location: Down south in Dixie
Posts: 6,801
Received 2,639 Likes
on
1,702 Posts
FYI Jeff, GM has the $3000 loyalty rebate until 10/31 if you can find that auto you need. It looks like Tillery still has the auto "mountainears" posted above. Good luck sir.
Last edited by Rebel Yell; 10-23-2017 at 03:59 PM.
10-26-2017, 03:16 PM
#19
04-24-2018, 03:40 PM
#20
Racer
If you ever want to sell this car let me know.
PRICE DROP!
I purchased this car new in Jan and took delivery in early Feb. It went straight to www.arpremier.com where the whole car was wrapped in 10 year LLumar and the windows tinted with their top of the line ceramic tint at a cost of $5,000. The car was gently and properly broken in with speed varied and always < 3,500 rpm. If you aren't familiar with the Collector's edition they are hard loaded. (see sticker) Only 1,000 were produced and 150 were exported so you don't see one everyday. (she is #306) Right now she is at 1,565 miles +/- . I have severe arthritis in my neck on the right side getting worse and shifting is causing pain and need to get an automatic.
I would love to find someone with a Collector's Edition, but will consider a trade for a similar 2017 GS 3LT or even a Z06. (2LZ minimum)
If you purchased an auto and have second thoughts about it, or want to buy a better than new unique corvette for a great price let's talk! 68,900 firm
I am located in central Arkansas.
Thanks,
Jeff
I purchased this car new in Jan and took delivery in early Feb. It went straight to www.arpremier.com where the whole car was wrapped in 10 year LLumar and the windows tinted with their top of the line ceramic tint at a cost of $5,000. The car was gently and properly broken in with speed varied and always < 3,500 rpm. If you aren't familiar with the Collector's edition they are hard loaded. (see sticker) Only 1,000 were produced and 150 were exported so you don't see one everyday. (she is #306) Right now she is at 1,565 miles +/- . I have severe arthritis in my neck on the right side getting worse and shifting is causing pain and need to get an automatic.
I would love to find someone with a Collector's Edition, but will consider a trade for a similar 2017 GS 3LT or even a Z06. (2LZ minimum)
If you purchased an auto and have second thoughts about it, or want to buy a better than new unique corvette for a great price let's talk! 68,900 firm
I am located in central Arkansas.
Thanks,
Jeff
