The first twin turbo C7 Z-first start vid
The following 2 users liked this post by MIGHTYM0USE:
Ben@WeaponX (05-16-2017),
Earl H (05-02-2017)
05-02-2017, 10:51 AM
#3
Instructor
Ya buddy, cant wait to see this thing rip,please do a good video of 2nd gear or 3rd gear pulls so we can see the guages and boost kick in, very exciting times, enjoy brotha
05-02-2017, 11:16 AM
#4
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
^^^ 
Should be nice.
Robert
Should be nice. Robert
Last edited by Steve Garrett; 05-02-2017 at 10:30 PM.
05-03-2017, 11:45 AM
#7
Melting Slicks
Thread Starter
So the lowest boost setting made a touch over 820whp on pump gas and single small meth nozzle.
This is before any mods to the stock fuel system (other than the cam lobe).
JTM will be installing the injectors, another fuel pump, and has the 15" spindle conversion yet to go on before we wrap up with some high boost high octane pulls!
This is before any mods to the stock fuel system (other than the cam lobe).
JTM will be installing the injectors, another fuel pump, and has the 15" spindle conversion yet to go on before we wrap up with some high boost high octane pulls!
05-03-2017, 12:46 PM
#8
^ WOW... That's a beautiful setup. Those IC's are beautiful
05-15-2017, 10:05 AM
#11
Advanced
So the lowest boost setting made a touch over 820whp on pump gas and single small meth nozzle.
This is before any mods to the stock fuel system (other than the cam lobe).
JTM will be installing the injectors, another fuel pump, and has the 15" spindle conversion yet to go on before we wrap up with some high boost high octane pulls!
This is before any mods to the stock fuel system (other than the cam lobe).
JTM will be installing the injectors, another fuel pump, and has the 15" spindle conversion yet to go on before we wrap up with some high boost high octane pulls!
05-15-2017, 10:28 AM
#12
Melting Slicks
Thread Starter
they are forgeline ga3r gloss lip satin center deep concave flat cap and diamond cut. very long process to get these made to my spec but forgeline and weaponx eventually got it handled. now that i have the drag kit i could be talked out of them for the right price.
The following users liked this post:
Is2scooby (05-26-2017)
05-26-2017, 11:41 AM
#14
Burning Brakes
