C7 Forced Induction/Nitrous C7 Corvette Turbochargers, Superchargers, Pulley Upgrades, Intercoolers, Wet and Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

Spark Plugs for Z06 and Nitrous Application

Thread Tools
 
Search this Thread
 
Old 06-13-2017, 12:32 PM
  #1  
mcoberly
Advanced
Thread Starter
 
mcoberly's Avatar
 
Member Since: Feb 2016
Location: Northglenn Colorado
Posts: 53
Received 9 Likes on 9 Posts
Default Spark Plugs for Z06 and Nitrous Application

Hi Guys ,

I am wondering what spark plugs to use on a C7 Z06 Running a 100 Shot of Nitrous w/ dedicated fuel system?
Old 06-13-2017, 04:03 PM
  #2  
0NitrousOutlet
Former Vendor
 
NitrousOutlet's Avatar
 
Member Since: Apr 2015
Location: Waco Texas
Posts: 495
Received 36 Likes on 30 Posts
Default

Originally Posted by mcoberly
Hi Guys ,

I am wondering what spark plugs to use on a C7 Z06 Running a 100 Shot of Nitrous w/ dedicated fuel system?

We here at nitrous outlet would recommend you to use a Brisk RR12S plug. You could start the gap at .028-.032. We are aware the Link does say for Hemi and 5.0 coyote motors as they use the same plug as well for nitrous. It is always recommended to use a non projected tip spark plug when spraying nitrous. If you have questions feel free to give us a call 254-848-4300 or email me directly back at houston@nitrousoutlet.com

http://www.nitrousoutlet.com/electro...isk-er12s.html
The following users liked this post:
mcoberly (06-13-2017)
Old 06-13-2017, 04:54 PM
  #3  
mcoberly
Advanced
Thread Starter
 
mcoberly's Avatar
 
Member Since: Feb 2016
Location: Northglenn Colorado
Posts: 53
Received 9 Likes on 9 Posts
Default

Originally Posted by NitrousOutlet
We here at nitrous outlet would recommend you to use a Brisk RR12S plug. You could start the gap at .028-.032. We are aware the Link does say for Hemi and 5.0 coyote motors as they use the same plug as well for nitrous. It is always recommended to use a non projected tip spark plug when spraying nitrous. If you have questions feel free to give us a call 254-848-4300 or email me directly back at houston@nitrousoutlet.com

http://www.nitrousoutlet.com/electro...isk-er12s.html
Thank you Very Much !
Old 06-13-2017, 08:14 PM
  #4  
GeorgeR_Zed06
Burning Brakes
 
GeorgeR_Zed06's Avatar
 
Member Since: Aug 2009
Location: Southeastern NM
Posts: 770
Received 161 Likes on 127 Posts

Default

I too went with the Brisk racing plugs (silvers for NA application tho) and am happy with them. My car seems to respond really well. It's a '14 z51 A6....I swapped the plugs when I installed the LT's and CAI!
Old 09-17-2017, 09:37 PM
  #5  
cdjnight
Advanced
 
cdjnight's Avatar
 
Member Since: Jul 2012
Location: Council Bluffs Iowa
Posts: 82
Likes: 0
Received 9 Likes on 8 Posts
Default

Originally Posted by NitrousOutlet
We here at nitrous outlet would recommend you to use a Brisk RR12S plug. You could start the gap at .028-.032. We are aware the Link does say for Hemi and 5.0 coyote motors as they use the same plug as well for nitrous. It is always recommended to use a non projected tip spark plug when spraying nitrous. If you have questions feel free to give us a call 254-848-4300 or email me directly back at houston@nitrousoutlet.com

http://www.nitrousoutlet.com/electro...isk-er12s.html
I'm not familiar with Brisk plugs, what would be the next colder plug in this series or would this plug handle more than 100hp shot? Looking to push the limits with 17' A8, all stock except fogger system. Planning on spraying 250+

Get notified of new replies

To Spark Plugs for Z06 and Nitrous Application




Quick Reply: Spark Plugs for Z06 and Nitrous Application



All times are GMT -4. The time now is 07:35 AM.