When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just wanted to post up and say thanks to the guys at A&A. Josh and Andy were cool to work with and put up with my endless questions. Dropped the car off a couple weeks back and they were to work on it when they finished a couple other projects. Well, last night I headed down to LA which is about 4.5 hours south of me, got there early and watched them finish up the tuning. I kept the 4.0 pulley as I wanted to keep it CARB legal. The car put down 610/548 with meth and only a Corsa valve back exhaust. Love the power it's putting down and again, thanks goes out to those guys. I wouldn't hesitate to take my car back for any other work it may need. There were also a few forum members that answered some questions for me, so thanks guys...you know who you are, I appreciate it. Here's a few pics..
Nice numbers, Pete, and the bay looks great. I'm getting ready to do the same. My ProMeth rear-mount kit is due here on Monday so I'll post pics of that when it arrives.
Thanks buddy! Yea I seen you were getting the Prometh kit, I just couldn't wait much longer as I had time to get it down there. Definitely want to see your pics when done.
The loud option is with the Turbosmart Raceport 50mm which is Vent To Atmosphere style no filter can be used on it.
The quiet option is with the Turbosmart 38mm with filter on straight outlet to help "muffle" the sound.
do you guys have a 50/50 BOV style option? Which is recirculating under light loads( normal driving) and exterior vented on full release. Like GFB BOV???
do you guys have a 50/50 BOV style option? Which is recirculating under light loads( normal driving) and exterior vented on full release. Like GFB BOV???
do you guys have a 50/50 BOV style option? Which is recirculating under light loads( normal driving) and exterior vented on full release. Like GFB BOV???
I did run a recirculating setup on my YSi C7 Z06. It sounded HORRIBLE.
The air being released into the intake tube is still audible through the air filter in the fender. It was really nasty sounding.
I had a Trailblazer SS a few years back with a built LS7 and a YSi. Same thing happened and I had to take it off.
For those wanting something quiet, I run a hose off the BOV to an aluminum splitter and run two filters. The volume and velocity of the air passing through each filter is cut in half and is much quieter.
Jesus our cars are literally identical and we are 40 min from one another. Pete outside of my wheels no one would tell the difference. LOL Same Supercharger setup, under the hood all CF and an A&A kit, and then yellow. LOL You my friend have some seriously good taste. LOL
07-01-2017, 07:31 AM
A&A Blower install - Meth - APR Carbon
My ProMeth rear-mount kit is due here on Monday so I'll post pics of that when it arrives.
