C7 Forced Induction/Nitrous C7 Corvette Turbochargers, Superchargers, Pulley Upgrades, Intercoolers, Wet and Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

Handling after adding boost (weight)

Thread Tools
 
Search this Thread
 
Old 01-19-2018, 05:24 PM
  #1  
John Micheal Henry
Drifting
Thread Starter
 
John Micheal Henry's Avatar
 
Member Since: Jan 2005
Location: Marshall Texas
Posts: 1,560
Received 275 Likes on 195 Posts

Default Handling after adding boost (weight)

Just wondering what to expect when I get my Vette boosted. There will be an additional 80 lbs on the front of the car. I'm going with 1" wider wheels front and back with larger Michelin 4S tires. I'll have an extra pair of 19" wheels with Nitto NT05R's to play. So gentlemen how much different does your cars handle with the extra front end weight?
Thanks for your time and replies..

I'm going with an A&A V3-Ti setup with Meth injection..
Old 01-19-2018, 06:26 PM
  #2  
123sugey
Dig
Support Corvetteforum!
 
123sugey's Avatar
 
Member Since: Jan 2006
Location: Port Saint Lucie FLORIDA & HONDURAS
Posts: 4,802
Received 759 Likes on 515 Posts

Default

15 Base A8 with Procharger ... didn’t notice anything on the handling ...
The following users liked this post:
John Micheal Henry (01-19-2018)
Old 01-20-2018, 01:08 AM
  #3  
FYREANT
I'm Batman..
Pro Mechanic
Support Corvetteforum!
 
FYREANT's Avatar
 
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,130
Received 908 Likes on 561 Posts
Tech Contributor

Default

Originally Posted by 123sugey
15 Base A8 with Procharger ... didn’t notice anything on the handling ...

Last edited by FYREANT; 01-20-2018 at 01:09 AM.
The following users liked this post:
John Micheal Henry (01-20-2018)
Old 01-20-2018, 11:21 AM
  #4  
RottenII
Racer
 
RottenII's Avatar
 
Member Since: May 2014
Location: WNY
Posts: 350
Received 26 Likes on 23 Posts
Default

Only thing I noticed was for some reason, my back tires would just not "hook" anymore. Not sure why. Other than that, no difference that I can tell.
Old 01-20-2018, 02:43 PM
  #5  
John Micheal Henry
Drifting
Thread Starter
 
John Micheal Henry's Avatar
 
Member Since: Jan 2005
Location: Marshall Texas
Posts: 1,560
Received 275 Likes on 195 Posts

Default

Originally Posted by RottenII
Only thing I noticed was for some reason, my back tires would just not "hook" anymore. Not sure why. Other than that, no difference that I can tell.
What kind/size wheel/tire did you end up running..?
Old 01-20-2018, 06:13 PM
  #6  
RottenII
Racer
 
RottenII's Avatar
 
Member Since: May 2014
Location: WNY
Posts: 350
Received 26 Likes on 23 Posts
Default

Originally Posted by John Micheal Henry
What kind/size wheel/tire did you end up running..?
20x11 with a Toyo TR1 in 305/25/20. Big mistake. Loved the look but would spin through into 3rd gear. I went with the 25 series to avoid rubbing. SOOO...fast forward...this winter I picked up a set of Cray's in 19x9.5 and 19x11 and have a set of Toyo R888R's 305/30/19's waiting. Hopefully will hook much better.
The following users liked this post:
John Micheal Henry (01-20-2018)
Old 01-20-2018, 07:31 PM
  #7  
John Micheal Henry
Drifting
Thread Starter
 
John Micheal Henry's Avatar
 
Member Since: Jan 2005
Location: Marshall Texas
Posts: 1,560
Received 275 Likes on 195 Posts

Default

Originally Posted by RottenII
20x11 with a Toyo TR1 in 305/25/20. Big mistake. Loved the look but would spin through into 3rd gear. I went with the 25 series to avoid rubbing. SOOO...fast forward...this winter I picked up a set of Cray's in 19x9.5 and 19x11 and have a set of Toyo R888R's 305/30/19's waiting. Hopefully will hook much better.
Rotten, Thanks for your reply. Believe it or not, I'm going to try some Toyo R888R's in stock Z51 size. Front: 245/35ZR19 and Rear 285/30ZR20. I'm lowered all the way down on stock bolts with MRC. Having an A&A V3-Ti with meth injection installed. I've got some XO Verona's that are 19x 91/2 and 20x11 that I could use with bigger tires like Toyo R888R's 265/30ZR19 and 315/30ZR20. What are your thoughts on this set up..??
Old 01-20-2018, 07:47 PM
  #8  
RottenII
Racer
 
RottenII's Avatar
 
Member Since: May 2014
Location: WNY
Posts: 350
Received 26 Likes on 23 Posts
Default

Originally Posted by John Micheal Henry
Rotten, Thanks for your reply. Believe it or not, I'm going to try some Toyo R888R's in stock Z51 size. Front: 245/35ZR19 and Rear 285/30ZR20. I'm lowered all the way down on stock bolts with MRC. Having an A&A V3-Ti with meth injection installed. I've got some XO Verona's that are 19x 91/2 and 20x11 that I could use with bigger tires like Toyo R888R's 265/30ZR19 and 315/30ZR20. What are your thoughts on this set up..??
You won't have a problem with the front. I'm running 275/30/19's without issue but too many people have had problems with rubbing with the 315/30/20 for me to want to chance it. I was just talking to a member here about the same issue a month or so ago. He ended up ordering the 888's in the stock 285/30/20 but the weather has been too crappy and cold for him to see how well they work.
The following users liked this post:
John Micheal Henry (01-26-2018)
Old 01-20-2018, 09:51 PM
  #9  
John Micheal Henry
Drifting
Thread Starter
 
John Micheal Henry's Avatar
 
Member Since: Jan 2005
Location: Marshall Texas
Posts: 1,560
Received 275 Likes on 195 Posts

Default

Originally Posted by RottenII
You won't have a problem with the front. I'm running 275/30/19's without issue but too many people have had problems with rubbing with the 315/30/20 for me to want to chance it. I was just talking to a member here about the same issue a month or so ago. He ended up ordering the 888's in the stock 285/30/20 but the weather has been too crappy and cold for him to see how well they work.
Rotten, I'll sure like to know how those R888R's in 285/30ZR20 hook up with 650 rwhp
Old 01-25-2018, 11:05 PM
  #10  
Dakynz
Advanced
 
Dakynz's Avatar
 
Member Since: Feb 2016
Posts: 88
Received 20 Likes on 12 Posts
Default

from a handling I would say no change.

But when i added the procharger it actually made the front end droop. Not noticeable from the eye but running a front splitter and have scrap issues that I didn't have prior to. All that added weight out in front of the engine + intercooler.
The following users liked this post:
John Micheal Henry (01-26-2018)
Old 02-02-2018, 04:48 PM
  #11  
Fast6.3
Pro
 
Fast6.3's Avatar
 
Member Since: Mar 2016
Location: El Paso Texas
Posts: 543
Received 52 Likes on 46 Posts
Default

Im running r988 325/30/19 it hooks a lot better but stills spins with 632hp

Get notified of new replies

To Handling after adding boost (weight)




Quick Reply: Handling after adding boost (weight)



All times are GMT -4. The time now is 01:49 PM.