Is this Mighty Mouse catch can enough for my setup?
#1
Is this Mighty Mouse catch can enough for my setup?
Z51 650 HP supercharged. I have seen some stupid high prices like $1300 for a catch can. What the heck makes them so expensive? Is this one going to be enough to help my engine breath better? https://www.mightymousesolutions.com...t-page/c7-wild
#2
Melting Slicks
Contact MightyMouse and he can help get you what you need. I run that can on my setup at ~617rwhp and have no problems with crankcase pressure
Last edited by SK360; 09-20-2018 at 03:02 PM.
#3
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
ttt
I am at your level also & run the MMS can from David also on my car. Let me tell you this you will not talk are get up with any better guy then David in here. Also shoot me a link r web site of these 1300.00 can that is just crazy I agree. Robert
#6
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
#8
Supporting Vendor
thanks for the support guys!
I run them on my own cars, so these things get tested beyond the power they are rated at do not worry!
I run them on my own cars, so these things get tested beyond the power they are rated at do not worry!
__________________
Solutions for the common gearhead #made in USA
mightymousesolutions.com
facebok.com/mightymousesolutions
#mmsolutions
Six time NMCA True Street Champions
Home of the first Twin Turbo C7Z 7.81 @ 176
3470# Stock bottom end and heads Corvette Stock Bottom End Record Holder
Solutions for the common gearhead #made in USA
mightymousesolutions.com
facebok.com/mightymousesolutions
#mmsolutions
Six time NMCA True Street Champions
Home of the first Twin Turbo C7Z 7.81 @ 176
3470# Stock bottom end and heads Corvette Stock Bottom End Record Holder
#9
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
ttt
David like the set up & plus the cold side intake pipe with the logo you made on it looks very clean set up.. Robert