1,120+whp C7 Z06 (A8 trans)
09-25-2018, 02:54 PM
#1
Former Vendor
Thread Starter
1,120+whp C7 Z06 (A8 trans)
Mods:
- ProCharger F1-X
- Crawford Racing Port Injection System
- HPA Cam & Heads Package
- HPA Low Side Fuel System
- ALKY Control Methanol Injection
C7 Z06 goes all out with our True Addict Package, plus some, to make serious power.
True Addict Package (link)
Stock A8 Transmission
Stock Block
- ProCharger F1-X
- Crawford Racing Port Injection System
- HPA Cam & Heads Package
- HPA Low Side Fuel System
- ALKY Control Methanol Injection
C7 Z06 goes all out with our True Addict Package, plus some, to make serious power.
True Addict Package (link)
Stock A8 Transmission
Stock Block
The following users liked this post:
Hate2Wait (09-28-2018)
09-25-2018, 05:22 PM
#2
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
ttt
Nice number & graft on the chart looks good.. Robert
09-27-2018, 11:57 AM
#6
Former Vendor
Thread Starter
CR, thanks!
The methanol injection has properties and benefits not associated with the port injection. We are not using the meth. here as a supplemental fuel source, or fuel "crutch".
This is a 4" pulley, with a stock lower pulley, at ~22psi.
The methanol injection has properties and benefits not associated with the port injection. We are not using the meth. here as a supplemental fuel source, or fuel "crutch".
This is a 4" pulley, with a stock lower pulley, at ~22psi.
09-28-2018, 02:16 PM
#7
Premium Supporting Vendor
Sounds like this one may need one of our 15" conversions to put that power down
Nice Build!
09-28-2018, 05:01 PM
#8
Burning Brakes
Thanks! Mind if I ask what size belt?
10-01-2018, 01:04 PM
#9
Former Vendor
Thread Starter
Running a K080435HD belt. It is a tight fit so be prepared with 2 people for install.
Updates coming tomorrow of this car's first passes down the track.
Updates coming tomorrow of this car's first passes down the track.
10-03-2018, 10:19 PM
#10
Burning Brakes
10-04-2018, 08:22 AM
#11
Former Vendor
Thread Starter
Customer ran it in Wisconsin. He left air filter on so around 1000rwhp on a 19" nitto DR. First pass was a 9.5@153 1.75 60. Then backed it up with a 9.44@155 1.70 60. He was then booted from the track. The owner posted about in on our Facebook page. We have a few more in the works that we plan on taking prepped for the track with more power than these runs were on.
The following users liked this post:
Dave01GT (10-04-2018)
10-12-2018, 10:05 PM
#12
Drifting
Awesome passes and dyno sheet which is backed up!!
10-19-2018, 03:10 PM
#15
Le Mans Master
