Not a Vette, but 14 tuning :)
#1
Supporting Vendor
Thread Starter
Not a Vette, but 14 tuning :)
I know its not a C7, but I wanted to share with you guys that we have released support for the new 2014 5.3 GM gas trucks on our inTune handheld programmer. The trucks and C7 share the same new E92 PCM, thus this is good news for all future C7 owners
Gains are solid, and the trucks seem to respond to tuning just as they have in the past. of course there are also options for things like adjusting gear/tire size, speed limiter, rev limiter, disabling AFM, etc.
Heres a quick dyno video of our 2014 Sierra, check it out, and let me know if you guys have any questions about the truck or future C7 tunes.
vid not embedding?
http://www.youtube.com/watch?v=1PHzK...ature=youtu.be
Gains are solid, and the trucks seem to respond to tuning just as they have in the past. of course there are also options for things like adjusting gear/tire size, speed limiter, rev limiter, disabling AFM, etc.
Heres a quick dyno video of our 2014 Sierra, check it out, and let me know if you guys have any questions about the truck or future C7 tunes.
vid not embedding?
http://www.youtube.com/watch?v=1PHzK...ature=youtu.be
__________________
Mike Litsch
DiabloSport/Range Brand Manager at Holley
Trinity T2 and inTune i3 now available for 99-19 Vettes!!
Subscribe to our YouTube Channel!
Mike Litsch
DiabloSport/Range Brand Manager at Holley
Trinity T2 and inTune i3 now available for 99-19 Vettes!!
Subscribe to our YouTube Channel!
Last edited by Mike@DiabloSport; 07-24-2013 at 04:15 PM.
#2
Le Mans Master
Member Since: Sep 2004
Location: North/Central NJ - a.k.a. Gotti in the CFNE section
Posts: 7,733
Received 1,532 Likes
on
523 Posts
St. Jude Donor '05
Nice! Will be looking forward to what you guys have for the C7... very easy, cost effective, reliable tuning.
For those that want to remove the tune before going in for service especially.
For those that want to remove the tune before going in for service especially.