C7 Z06, Torch Red with HRE's!!!
#11
Scraping the splitter.
Cool. Not sure about the cutout at the bottom of the grille. Also, are those hoodpins on a rear-opening hood?
The quarters look beefy, and they will need them with 600+ hp, as the 285 Michelins won't be enough with 600 hp.
S.
The quarters look beefy, and they will need them with 600+ hp, as the 285 Michelins won't be enough with 600 hp.
S.
#12
Tech Contributor
Member Since: Aug 1999
Location: Should this thoughtful, valuable contribution meet with no acknowledgement or 'thanks' this post----
Posts: 16,382
Received 399 Likes
on
257 Posts
this is what I've been trying to get across to those looking for wheel ideas...well done, and let's see some alternate views...
#14
#15
Drifting
Thread Starter
I finished the render first. I just wanted to make people wait because I got the exact response I was looking for. I was trolling, yet I wasn't actually trolling. The 2015 Mustang crowd is the same way. They have anxiety attacks over a car covered in a black tarp.
#16
My preference would be to find a more concave rim .... these have been seen many time before. Though very nice, just not doing it for me,
So pimpin out the CR7 to look like the Z07 from C7pimp is all good.
So pimpin out the CR7 to look like the Z07 from C7pimp is all good.
Last edited by User 2623; 08-27-2013 at 11:16 PM.
#17
Drifting
Thread Starter
#18
Melting Slicks
Member Since: Nov 2002
Location: North shore,Ma./Naples Florida
Posts: 3,059
Received 272 Likes
on
144 Posts
Nice job- and I'm betting you are not very far off. I am thinking the side scoop may be more pronounced and aggressive also.
Last edited by Frankie2blue; 08-27-2013 at 11:21 PM.
#19
Drifting
Thread Starter