Official Silver C7 pic thread
#581
Le Mans Master
Blade Silver = Great choice. I also considered AW. Too much contrast with black accents for me. I have Blade Silver on order. I went with Black interior.
If you like the Blade Silver exterior with black accents, consider black wheels, black hood stinger and transparent top (which looks black). Build one on Chevrolet.com and you can see how it looks.
Good luck with decision.
If you like the Blade Silver exterior with black accents, consider black wheels, black hood stinger and transparent top (which looks black). Build one on Chevrolet.com and you can see how it looks.
Good luck with decision.
Silver/black is ABSOLUTELY classic, currently on my fourth silver Vette.
Needless to say, I'm sold.
The following 3 users liked this post by 50th year:
The following 3 users liked this post by Borntorun04/17:
#585
Burning Brakes
White doesn't look bad on the C7, but I think it looks better on luxury vehicles. I was close to getting white twice but the dealers wouldn't budge.
#586
Race Director
Here's my C7:
2017 GS, had it about 90 days.
2017 GS, had it about 90 days.
Last edited by Kevin A Jones; 10-12-2017 at 04:20 PM.
The following 3 users liked this post by Kevin A Jones:
#588
Le Mans Master
Here's a couple of the newer ones:
2013 GS, 2LT, A6, NPP, chrome wheels, carbon fiber accents.
2016 2LT, A8, PDR, Z51 factory spoiler. Stock as the day is long. Might add some carbon fiber stuff, later. Had good luck w/C7 Carbon.
The following 3 users liked this post by Chuck72:
#589
Le Mans Master
Member Since: Jan 2006
Location: Down south in Dixie
Posts: 6,801
Received 2,639 Likes
on
1,702 Posts
Dang Kevin, that's the exact GS drop top I built on GM's site the other day. What a beauty brother.
Funny thing is my bride, and I were never fond of silveron a Corvette until we saw one at a dealer in Myrtle Beach. We looked at each other, and just knew that was the color for our C7.
Funny thing is my bride, and I were never fond of silveron a Corvette until we saw one at a dealer in Myrtle Beach. We looked at each other, and just knew that was the color for our C7.
The following users liked this post:
Kevin A Jones (10-12-2017)
#590
Race Director
Dang Kevin, that's the exact GS drop top I built on GM's site the other day. What a beauty brother.
Funny thing is my bride, and I were never fond of silveron a Corvette until we saw one at a dealer in Myrtle Beach. We looked at each other, and just knew that was the color for our C7.
Funny thing is my bride, and I were never fond of silveron a Corvette until we saw one at a dealer in Myrtle Beach. We looked at each other, and just knew that was the color for our C7.
The following users liked this post:
Rebel Yell (10-12-2017)
#591
Instructor
Kevin, you made a great choice. The vette looks great in Blade Silver as it makes the lines of car stand out, also I like the red interior contrast. The more I see this colour the more I like it.
The following users liked this post:
Kevin A Jones (10-12-2017)
The following 3 users liked this post by agapsdiver:
#593
Burning Brakes
The following 3 users liked this post by Eff A Ford:
#594
Intermediate
I need advice...
I powder-coated the wheels in gloss black, had the side view mirrors painted gloss black, and had the regular spoiler installed in factory black (or whatever black it is they come in).
So I need advice on the splitter and side skirts I'm going to get. Since the wheels and mirrors are gloss black, should I paint them gloss black also, or since the rest of the original parts (hood & side vents, and full tail end of the car) are carbon flash, should I leave it carbon flash as they currently are. (It is a used set).
The following users liked this post:
CAB6 (10-30-2017)
#595
Burning Brakes
I powder-coated the wheels in gloss black, had the side view mirrors painted gloss black, and had the regular spoiler installed in factory black (or whatever black it is they come in).
So I need advice on the splitter and side skirts I'm going to get. Since the wheels and mirrors are gloss black, should I paint them gloss black also, or since the rest of the original parts (hood & side vents, and full tail end of the car) are carbon flash, should I leave it carbon flash as they currently are. (It is a used set).
The following users liked this post:
lisanix74 (10-30-2017)
#596
Race Director
I powder-coated the wheels in gloss black, had the side view mirrors painted gloss black, and had the regular spoiler installed in factory black (or whatever black it is they come in).
So I need advice on the splitter and side skirts I'm going to get. Since the wheels and mirrors are gloss black, should I paint them gloss black also, or since the rest of the original parts (hood & side vents, and full tail end of the car) are carbon flash, should I leave it carbon flash as they currently are. (It is a used set).
The following users liked this post:
lisanix74 (10-30-2017)
The following users liked this post:
Gonzo (12-20-2017)
#599
Burning Brakes
Member Since: Jun 2011
Location: BLOOMINGTON IN
Posts: 813
Received 1,575 Likes
on
404 Posts
2023 C8 of the Year Finalist - Modified
2022 C8 of the Year Finalist - Unmodified
2021 Corvette of the Year - Unmodified
Winner 2020 C7 of the Year - Unmodified
Its a gm poverty spoiler and rpi skirts. Both are painted carbon flash matalic
The following 2 users liked this post by NashvilleGrandSport:
Gonzo (12-20-2017),
Rebel Yell (11-10-2017)