$999 shipped for C7 splitter AND rocker blades!!!
#1
Safety Car
Thread Starter
Member Since: Jan 2012
Location: Cin City
Posts: 4,885
Received 481 Likes
on
317 Posts
St. Jude Donor '14
July 14 Sale for C7 splitter AND rocker blades!!!
We're running a special on our carbon splitter and rocker blades. These are American made and priced so competitively that even our carbon fiber rivals most fiberglass kits! They're made from the same molds and come gel coated ready to prep and paint. They use OEM mounting locations as well!
Composite splitters and rocker blades are $999 shipped!
Carbon Fiber with clear coat are $1499 shipped!
Splitter - It has a nice lip across the front that tapers up and angles downward between the two fins on the lower front bumper lip so there's no awkward flat step up to try and bridge the gap. This space between the fins also provides some driveway relief! I know a couple of you guys were worried about the winglets on the side. They're in line with the tires and they're very short, so they blend in very well, but really draw some nice attention as well! It uses all OEM mounting bolt holes and if present, you can reattach your air deflectors under them if you wish.
Rocker blades - These run wheel to wheel and don't flare out until past the door line. We did this not only for style but to also keep the road rash off the bulging rear fenders. Again, these use all OEM bolt hole for mounting.
Enjoy the pics!
Notice the splitter and hood profile
side profile of splitter, rockers, and spoiler
Check out the splitter and hood profile!
The END
Composite splitters and rocker blades are $999 shipped!
Carbon Fiber with clear coat are $1499 shipped!
Splitter - It has a nice lip across the front that tapers up and angles downward between the two fins on the lower front bumper lip so there's no awkward flat step up to try and bridge the gap. This space between the fins also provides some driveway relief! I know a couple of you guys were worried about the winglets on the side. They're in line with the tires and they're very short, so they blend in very well, but really draw some nice attention as well! It uses all OEM mounting bolt holes and if present, you can reattach your air deflectors under them if you wish.
Rocker blades - These run wheel to wheel and don't flare out until past the door line. We did this not only for style but to also keep the road rash off the bulging rear fenders. Again, these use all OEM bolt hole for mounting.
Enjoy the pics!
Notice the splitter and hood profile
side profile of splitter, rockers, and spoiler
Check out the splitter and hood profile!
The END
Last edited by Ben@WeaponX; 08-10-2014 at 08:07 PM.
#9
Safety Car
Thread Starter
Member Since: Jan 2012
Location: Cin City
Posts: 4,885
Received 481 Likes
on
317 Posts
St. Jude Donor '14
Those are COR, he's ordering a new set of wheels and those are only couple months old and a couple thousand miles on them so I can hook you two up if you're interested in them.
thx, those are PUR LX12s and I can get you a set of 19/20s or 20/21s
The ones shown are all carbon fiber, those come clear coated and ready to bolt on. The fiberglass come gel coated and require paint, but it's just the GM paint code and easy to do when installed.
The weight difference is barely a couple pounds as the composite is light like carbon fiber. The difference between our fiberglass and carbon hood is only 5lbs for example. $799 shipped for cf, $549 for fg
Me too! It's surprisingly one of the most complimented components in person. I'll make you a deal on that too if you're interested!
thx, those are PUR LX12s and I can get you a set of 19/20s or 20/21s
The weight difference is barely a couple pounds as the composite is light like carbon fiber. The difference between our fiberglass and carbon hood is only 5lbs for example. $799 shipped for cf, $549 for fg
Me too! It's surprisingly one of the most complimented components in person. I'll make you a deal on that too if you're interested!
#12
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,356
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Wow Ben-I love it all !!!
The winglets on the front splitter is awesome, love the CF hood and the rear spoiler.
I couldn't find it, but what was your price on the lower rear fascia (in Carbon Fiber and without Carbon Fiber)?
The winglets on the front splitter is awesome, love the CF hood and the rear spoiler.
I couldn't find it, but what was your price on the lower rear fascia (in Carbon Fiber and without Carbon Fiber)?
#13
Safety Car
Thread Starter
Member Since: Jan 2012
Location: Cin City
Posts: 4,885
Received 481 Likes
on
317 Posts
St. Jude Donor '14
Thx Steven! Composite is $1099 and CF is $1499!
https://weaponx-c7.myshopify.com/col...on-diffuser-c7
https://weaponx-c7.myshopify.com/col...on-diffuser-c7
#19
Advanced
#20
Safety Car
Thread Starter
Member Since: Jan 2012
Location: Cin City
Posts: 4,885
Received 481 Likes
on
317 Posts
St. Jude Donor '14
I can take the order over the phone or via paypal fellas! Just give me a ring or shoot me an email!
sales@weaponXmotorsports.com
sales@weaponXmotorsports.com