03-25-2015, 06:06 PM
Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Interior How-Tos
- C5 C6 Corvette: How to Disable Skip Shift (CAGS)
Step by step instructions for do-it-yourselfers...
Browse all: Interior How-Tos
C7 Corvette Stingray Skip Shift Eliminator - CAGS - 1 to 4 eliminator!
02-22-2014, 07:46 PM
#1
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
C7 Corvette Stingray Skip Shift Eliminator - CAGS - 1 to 4 eliminator!
C7 Corvette Stingray Skip Shift Eliminator
Also called CAGS Defeat
Do you hate the 1-4 skip shift installed on the C7 Manual Transmission? This little device will eliminate that annoying issue.
Our corvette skip shift kit will allow you to disable the Computer Aided Gear Selection (CAGS) feature of your C6 Corvette's 7-speed gearbox. This kit comes with the correct connectors, plugs and seals to protect your wiring harness and CAGS solenoid to allow you to re-connect the harness for full CAGS function, if you so desire. This kit is designed for use a C7 Corvette only. Will not fit C5 or C6 Corvette. No permanent modifications are required to install this product.
In stock here: http://www.southerncarparts.com/corv...or-p-5789.html
Here's a picture of the C7 Corvette CAGS unit installed our our shop Stingray...
Also called CAGS Defeat
Do you hate the 1-4 skip shift installed on the C7 Manual Transmission? This little device will eliminate that annoying issue.
Our corvette skip shift kit will allow you to disable the Computer Aided Gear Selection (CAGS) feature of your C6 Corvette's 7-speed gearbox. This kit comes with the correct connectors, plugs and seals to protect your wiring harness and CAGS solenoid to allow you to re-connect the harness for full CAGS function, if you so desire. This kit is designed for use a C7 Corvette only. Will not fit C5 or C6 Corvette. No permanent modifications are required to install this product.
In stock here: http://www.southerncarparts.com/corv...or-p-5789.html
Here's a picture of the C7 Corvette CAGS unit installed our our shop Stingray...
__________________
Last edited by southerncarparts; 02-24-2014 at 02:12 PM.
02-22-2014, 10:45 PM
#4
Do you have install instructions?
02-22-2014, 10:55 PM
#5
Le Mans Master
Member Since: Apr 2013
Posts: 6,657
Received 4,116 Likes
on
1,470 Posts
2020 C8 of the Year Finalist - Unmodified
I have to say the 1-4 skip can be really annoying at times.
Need install instructions.
Need install instructions.
Last edited by Sin City; 02-22-2014 at 11:01 PM.
02-23-2014, 08:11 AM
#7
Some of the other options for the CAGS removal have wires between the connectors but yours doesn't seem to (or at least the pictures don't show it)... I'm curious as to the difference.
02-23-2014, 10:04 AM
#9
I was going to go with a Pfadt ecu reflash that would eliminate CAGS at the source but I'm kinda worried about warranty issues. I bought this eliminator instead for now. Anxious to get it.
02-23-2014, 10:09 AM
#10
Race Director
I did the mod on my C6. Skip shift C7 kit, picture looks like a similar setup. Took me longer to jack the car to gain access then to perform the mod. In the city traffic that I normally operate in, that darn gear block interferes all the time. Increased acceleration isn't an option unless you want to smash into the rear of proceeding vehicle. A great way to make friends?
02-23-2014, 10:25 AM
#11
Instructor
Member Since: Feb 2014
Location: Daytona Beach Florida
Posts: 222
Likes: 0
Received 4 Likes
on
4 Posts
I have a friend with C7 and his has never gone into the shift eliminator mode. He drove around for half hour yesterday trying to make it go into that mode and it never did.engine was warm, shifting at the proper mph and low throttle placement as described was necessary for it to kick in. After 2000 miles of driving it has never been on in his car. I bought and eliminator for a Corvette I just ordered but he says I will never need it if I have same experience as he has. Any input here???
02-23-2014, 03:15 PM
#12
Racer
Member Since: Apr 2006
Location: Cocoa Beach FL
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
02-23-2014, 04:39 PM
#13
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
I did the mod on my C6. Skip shift C7 kit, picture looks like a similar setup. Took me longer to jack the car to gain access then to perform the mod. In the city traffic that I normally operate in, that darn gear block interferes all the time. Increased acceleration isn't an option unless you want to smash into the rear of proceeding vehicle. A great way to make friends?
02-23-2014, 04:40 PM
#14
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
I have a friend with C7 and his has never gone into the shift eliminator mode. He drove around for half hour yesterday trying to make it go into that mode and it never did.engine was warm, shifting at the proper mph and low throttle placement as described was necessary for it to kick in. After 2000 miles of driving it has never been on in his car. I bought and eliminator for a Corvette I just ordered but he says I will never need it if I have same experience as he has. Any input here???
02-23-2014, 04:42 PM
#15
Safety Car
02-23-2014, 05:07 PM
#16
Burning Brakes
I have a friend with C7 and his has never gone into the shift eliminator mode. He drove around for half hour yesterday trying to make it go into that mode and it never did.engine was warm, shifting at the proper mph and low throttle placement as described was necessary for it to kick in. After 2000 miles of driving it has never been on in his car. I bought and eliminator for a Corvette I just ordered but he says I will never need it if I have same experience as he has. Any input here???
02-23-2014, 07:42 PM
#19
Drifting
C7 Corvette Stingray Skip Shift Eliminator
Also called CAGS Defeat
Do you hate the 1-4 skip shift installed on the C7 Manual Transmission? This little device will eliminate that annoying issue.
Our corvette skip shift kit will allow you to disable the Computer Aided Gear Selection (CAGS) feature of your C6 Corvette's 7-speed gearbox. This kit comes with the correct connectors, plugs and seals to protect your wiring harness and CAGS solenoid to allow you to re-connect the harness for full CAGS function, if you so desire. This kit is designed for use a C7 Corvette only. Will not fit C5 or C6 Corvette. No permanent modifications are required to install this product.
In stock here: http://www.southerncarparts.com/corv...or-p-5789.html
Also called CAGS Defeat
Do you hate the 1-4 skip shift installed on the C7 Manual Transmission? This little device will eliminate that annoying issue.
Our corvette skip shift kit will allow you to disable the Computer Aided Gear Selection (CAGS) feature of your C6 Corvette's 7-speed gearbox. This kit comes with the correct connectors, plugs and seals to protect your wiring harness and CAGS solenoid to allow you to re-connect the harness for full CAGS function, if you so desire. This kit is designed for use a C7 Corvette only. Will not fit C5 or C6 Corvette. No permanent modifications are required to install this product.
In stock here: http://www.southerncarparts.com/corv...or-p-5789.html