Parade flags for C7
#2
Team Owner
Try Mid America Motorworks.
#3
Drifting
The holes in the C7 w/s frame are different than previous models and the flags won't stay in them. I wanted something too so went to a fabricator and started a design with him to make the one shown (much larger and will support a 5ft flag and staff). I've received so much attention at shows and parades I'm in the patent process now and my attorney will help me with an LLC when the patent is done. I don't have a time frame, it seems the process is laborious. I'm also looking at a different fabricator that has the time to produce them. I can tell you it's 100% aluminum, and hand made and welded in GA. I also had it powder-coated in a semi-gloss black. It sits on the carpet frame piece behind the seats and hooks to the rear roof latch with two thumb screws. No mod at all is required to the car.
When I'm positive I can legally accept orders I'll go through the forum vendor section and pay the fee so I can advertise it and publish the price. It currently weighs about 7lbs with the powder-coating. Very easy to handle and mount in about two minutes or less after removing the roof.
When I'm positive I can legally accept orders I'll go through the forum vendor section and pay the fee so I can advertise it and publish the price. It currently weighs about 7lbs with the powder-coating. Very easy to handle and mount in about two minutes or less after removing the roof.
#4
Moderator
Flag Caddie made these for C5 and C6 Corvettes. However, the hole in the windshield header on the C7 does not go all the way through, so these won't work.
#5
How about C7 verts?
#6
Safety Car
Thread Starter
#7
Drifting
#8
Safety Car
Thread Starter
#9
Moderator
#10
Safety Car
Thread Starter
Just got an email from Flagcaddie and they will have C7 flags very soon and will email me when they are ready and I''ll pass that on to you guys
The following users liked this post:
Landru (05-15-2018)
#11
Moderator
#12
Moderator/Tech Contributor
Member Since: Jun 2001
Location: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
Posts: 18,235
Received 3,822 Likes
on
2,066 Posts
2015 C7 of the Year Finalist
Don't be forgetting us convertible guys! I need a set of those flags too!
Elmer
Elmer
#14
Safety Car
Thread Starter
#15
Burning Brakes
The holes in the C7 w/s frame are different than previous models and the flags won't stay in them. I wanted something too so went to a fabricator and started a design with him to make the one shown (much larger and will support a 5ft flag and staff). I've received so much attention at shows and parades I'm in the patent process now and my attorney will help me with an LLC when the patent is done. I don't have a time frame, it seems the process is laborious. I'm also looking at a different fabricator that has the time to produce them. I can tell you it's 100% aluminum, and hand made and welded in GA. I also had it powder-coated in a semi-gloss black. It sits on the carpet frame piece behind the seats and hooks to the rear roof latch with two thumb screws. No mod at all is required to the car.
When I'm positive I can legally accept orders I'll go through the forum vendor section and pay the fee so I can advertise it and publish the price. It currently weighs about 7lbs with the powder-coating. Very easy to handle and mount in about two minutes or less after removing the roof.
When I'm positive I can legally accept orders I'll go through the forum vendor section and pay the fee so I can advertise it and publish the price. It currently weighs about 7lbs with the powder-coating. Very easy to handle and mount in about two minutes or less after removing the roof.
#16
Drifting
I have sold my beloved 'LoLa', but I still have the flag mount. It will fit all C7 coupes with out any additional hardware required. The black is a powder coat baked onto heavy gauge aluminum and in excellent shape. I was going to put it into production for about $750 per mount but never pursued it after selling my coupe.
If you're ever passing through Atlanta (I live in the northern burb Roswell), send me a PM to arrange for a look if you're interested at that price. I have nearly that much invested in the initial unit.
Looking back, I wish I had never sold Lola
If you're ever passing through Atlanta (I live in the northern burb Roswell), send me a PM to arrange for a look if you're interested at that price. I have nearly that much invested in the initial unit.
Looking back, I wish I had never sold Lola
The following users liked this post:
Bob Beroza (05-15-2018)
#18
Safety Car
Call Doug at Flag Caddie LLC, Belvidere, IL, 815-979-4591, he has US Flags with correct posts for C-1 through C-7. I received US Flags and posts for C-7 Vert and C-7 Coup from him in March, 2018. They fit perfect.
The following 2 users liked this post by Red C8 of Jax:
Bob Beroza (05-15-2018),
Landru (05-15-2018)
#19
Drifting
Member Since: Dec 2005
Location: Cape Coral Fl
Posts: 1,716
Received 116 Likes
on
76 Posts
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20-'21
Have used these flags bought at ACE Hardware for three Memorial Day Parades! They cost $3 apiece. Wrapped some tape on the ends, and solid below 40 mph!
The following users liked this post:
Landru (05-15-2018)
#20
Burning Brakes
Thanks, guys,
We're looking to get our club logo done on a flag for parade use only.
I would like to know your thoughts on how to accomplish this for our club.
Anyone know Flag Caddie does custom flags?
We're looking to get our club logo done on a flag for parade use only.
I would like to know your thoughts on how to accomplish this for our club.
Anyone know Flag Caddie does custom flags?