2015 C7 Corvette Z06 Steering Wheels Available @ CULTRAG Performance!
#41
Premium Supporting Vendor
Thread Starter
We do have a vendor working on a solution to the Z06 logo situation and we will be offering you the ability to customize that section of the wheel as well as the silver trim on the steering wheel.
__________________
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
#44
I'm interested as soon as the Z06 is gone. Was never a big fan of putting emblems anywhere that don't belong or mislead.
I actually just like the bottom being flat. The wifes 15 Optima has a "D" wheel and I like it compared to the traditional wheel.
I actually just like the bottom being flat. The wifes 15 Optima has a "D" wheel and I like it compared to the traditional wheel.
#45
Premium Supporting Vendor
Thread Starter
https://www.corvetteforum.com/forums...im-wanted.html
#46
Premium Supporting Vendor
Thread Starter
The situation with the Z06 on the bottom of the steering wheel has been handled! Order at the link below.
http://www.rpidesigns.com/shop/item.aspx?itemid=5219
Order your steering wheels from CULTRAG Performance!
Automatic Z06 Leather Steering Wheels
http://www.cultragfactoryparts.com/c...teering-wheel/
Manual Z06 Leather Steering Wheels
http://www.cultragfactoryparts.com/c...teering-wheel/
Suede Steering Wheels
http://www.cultragfactoryparts.com/c...teering-wheel/
http://www.rpidesigns.com/shop/item.aspx?itemid=5219
Order your steering wheels from CULTRAG Performance!
Automatic Z06 Leather Steering Wheels
http://www.cultragfactoryparts.com/c...teering-wheel/
Manual Z06 Leather Steering Wheels
http://www.cultragfactoryparts.com/c...teering-wheel/
Suede Steering Wheels
http://www.cultragfactoryparts.com/c...teering-wheel/
#49
Melting Slicks
Yes. You do not have to remove the airbag or wheel. You do have to unlock the airbag and side it out slightly - but you don't have to pull it all the way out, disconnect or remove it. Just pull it out enough to lift the silver trim and then remove the emblem.
#50
Safety Car
I just ordered the suede Z06 wheel along with a suede shift **** from Gene yesterday. I was sending him emails with some questions and he responded immediately. I then realized it was Saturday and Valentines day! What great customer service!
I also picked up the piece from RPI that replaces the Z06 emblem in Carbon Flash as well as the Carbon Flash trim piece on the wheel.
I can't wait until everything arrives!!
I also picked up the piece from RPI that replaces the Z06 emblem in Carbon Flash as well as the Carbon Flash trim piece on the wheel.
I can't wait until everything arrives!!
#51
Drifting
Gene/Patrick,
Any idea when you'll be getting more of the Black ones with gray stitching in the auto version in stock ?
BTW why do they cost $50 more than black ones with other colored stitching ?
Thanks
Any idea when you'll be getting more of the Black ones with gray stitching in the auto version in stock ?
BTW why do they cost $50 more than black ones with other colored stitching ?
Thanks
#53
Premium Supporting Vendor
Thread Starter
They have just become available so if you're interested let me know. The $50 extra is because that is the higher base price that GM charges for this item. We do not know why they charge $50 extra.
#54
Race Director
#55
Race Director
#56
Race Director
#57
Race Director
#58
Race Director
#59
Safety Car
I sent Gene an email last Saturday (Valentine's day) and he responded immediately. I told him I wanted the D shaped wheel in suede and the matching suede shift **** and he put it together and invoiced me within minutes. I expected at least a 2 week wait knowing that GM can all of a sudden go "out of stock". To my surprise, my wheel and shift **** showed up today. Less than a week after ordering. All I can say is Gene is the MAN!
Too bad I'm headed out of town for a week
Too bad I'm headed out of town for a week
#60
Instructor
Member Since: Jul 2014
Location: Silicon Valley CA
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Personally i do not like the painted look. The whole point of the d-bottom steering wheel other than the shape is the exposed carbon fiber element.
I think an easy fix would be a stripe of vinyl with the Z51 logo on it going straight across the bottom of the steering wheel so that carbon fiber is still shown.
I think an easy fix would be a stripe of vinyl with the Z51 logo on it going straight across the bottom of the steering wheel so that carbon fiber is still shown.