New From Southern Car Parts…C7 Corvette Stingray Coupe Trunk Partition Available
#25
Melting Slicks
"The C7 Corvette Stingray trunk parition is designed so that you simply lay the partition down while the removable top is being stored."
Does this mean you have to lay the partition down while stowing the top and then set the partition back in place once the top is secured in the rear?
Does this mean you have to lay the partition down while stowing the top and then set the partition back in place once the top is secured in the rear?
#27
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
C7 Corvette Stingray Coupe Trunk Partition
Do you get tired of driving down the road and having all of your belongings in the trunk cargo area end up directly behind your head? Southern Car Parts is carrying on our tradition of the trunk partition for the all new 2014-2015 C7 Corvette Stingray. We originally created the Corvette trunk partition for the C5 Corvette and then C6 Corvette. Many Stingray owners were asking for us to create something for their C7 and we did. This trunk partition will easily slide into the cargo area and just rest in place, tightly against the roor latches.
In Stock Here: http://www.southerncarparts.com/corv...on-p-6612.html
The C7 Corvette Stingray trunk parition is designed so that you simply lay the partition down while the removable top is being stored. Best of all, this partition does not require any permanent modifications and can be removed in the matter of seconds. We've designed this parition to sit in place tight and will not move under hard acceleration or under hard breaking.
The C7 Corvette Stingray trunk partition is made out of quality 1/2" MDF board and is carpeted on all sides and on all edges for a nice finished look. This piece really looks like GM included it from the factory.
In Stock Here: http://www.southerncarparts.com/corv...on-p-6612.html
ALSO AVAILABLE C7 CORVETTE TRUNK VETTE TRAY
For the C7 Corvette Stingray. Are you tired of items sliding around the back of your Corvette with little usable or convenient storage space? If so, the Southern Car Parts VetteTray Cargo Organizer is for you.
VetteTray Available here: http://www.southerncarparts.com/corv...ay-p-5855.html
The VetteTray is sturdy yet lightweight weighing in at less than 1 pound. Our registered design is constructed of 2 inch High-Density foam which is factory cut and wrapped in matching black or dark grey carpet for a perfect fit and finish. Keeping weight in mind, the Vette Tray is made from Extruded Polystyrene foam and wrapped in black carpet that is a close match to the C7 carpet. If you are unhappy with your purchase for any reason, simply return it for a full refund.
- Each VetteTray comes standard with (2) Drink Holders and (2) 9 x 12in storage trays
- Perfect for holding cellphones, PDA's CD's, wallets or any other small items
- Required NO modifications to your Corvette
- Does not come loose with hard braking or acceleration
VetteTray Available here: http://www.southerncarparts.com/corv...ay-p-5855.html
Do you get tired of driving down the road and having all of your belongings in the trunk cargo area end up directly behind your head? Southern Car Parts is carrying on our tradition of the trunk partition for the all new 2014-2015 C7 Corvette Stingray. We originally created the Corvette trunk partition for the C5 Corvette and then C6 Corvette. Many Stingray owners were asking for us to create something for their C7 and we did. This trunk partition will easily slide into the cargo area and just rest in place, tightly against the roor latches.
In Stock Here: http://www.southerncarparts.com/corv...on-p-6612.html
The C7 Corvette Stingray trunk parition is designed so that you simply lay the partition down while the removable top is being stored. Best of all, this partition does not require any permanent modifications and can be removed in the matter of seconds. We've designed this parition to sit in place tight and will not move under hard acceleration or under hard breaking.
The C7 Corvette Stingray trunk partition is made out of quality 1/2" MDF board and is carpeted on all sides and on all edges for a nice finished look. This piece really looks like GM included it from the factory.
In Stock Here: http://www.southerncarparts.com/corv...on-p-6612.html
ALSO AVAILABLE C7 CORVETTE TRUNK VETTE TRAY
For the C7 Corvette Stingray. Are you tired of items sliding around the back of your Corvette with little usable or convenient storage space? If so, the Southern Car Parts VetteTray Cargo Organizer is for you.
VetteTray Available here: http://www.southerncarparts.com/corv...ay-p-5855.html
The VetteTray is sturdy yet lightweight weighing in at less than 1 pound. Our registered design is constructed of 2 inch High-Density foam which is factory cut and wrapped in matching black or dark grey carpet for a perfect fit and finish. Keeping weight in mind, the Vette Tray is made from Extruded Polystyrene foam and wrapped in black carpet that is a close match to the C7 carpet. If you are unhappy with your purchase for any reason, simply return it for a full refund.
- Each VetteTray comes standard with (2) Drink Holders and (2) 9 x 12in storage trays
- Perfect for holding cellphones, PDA's CD's, wallets or any other small items
- Required NO modifications to your Corvette
- Does not come loose with hard braking or acceleration
VetteTray Available here: http://www.southerncarparts.com/corv...ay-p-5855.html
The following users liked this post:
fsvoboda (07-01-2017)
#30
I have the partition installed...pretty sure it's from Southern car parts.. I don't have to remove or lay the partition down to place and lock the removable roof in the hatch. it fits perfectly. I have to say I think the partition is the best mod i've ever done. the fit and finish looks factory and really keeps all my stuff easily accessible.
The following users liked this post:
doug doo wop (08-11-2017)
#34
#36
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
C7 Corvette Stingray Coupe Trunk Partition
Do you get tired of driving down the road and having all of your belongings in the trunk cargo area end up directly behind your head? Southern Car Parts is carrying on our tradition of the trunk partition for the all new 2014-2015 C7 Corvette Stingray. We originally created the Corvette trunk partition for the C5 Corvette and then C6 Corvette. Many Stingray owners were asking for us to create something for their C7 and we did. This trunk partition will easily slide into the cargo area and just rest in place, tightly against the roor latches.
In Stock Here: http://www.southerncarparts.com/corv...on-p-6612.html
The C7 Corvette Stingray trunk parition is designed so that you simply lay the partition down while the removable top is being stored. Best of all, this partition does not require any permanent modifications and can be removed in the matter of seconds. We've designed this parition to sit in place tight and will not move under hard acceleration or under hard breaking.
The C7 Corvette Stingray trunk partition is made out of quality 1/2" MDF board and is carpeted on all sides and on all edges for a nice finished look. This piece really looks like GM included it from the factory.
In Stock Here: http://www.southerncarparts.com/corv...on-p-6612.html
ALSO AVAILABLE C7 CORVETTE TRUNK VETTE TRAY
For the C7 Corvette Stingray. Are you tired of items sliding around the back of your Corvette with little usable or convenient storage space? If so, the Southern Car Parts VetteTray Cargo Organizer is for you.
VetteTray Available here: http://www.southerncarparts.com/corv...ay-p-5855.html
The VetteTray is sturdy yet lightweight weighing in at less than 1 pound. Our registered design is constructed of 2 inch High-Density foam which is factory cut and wrapped in matching black or dark grey carpet for a perfect fit and finish. Keeping weight in mind, the Vette Tray is made from Extruded Polystyrene foam and wrapped in black carpet that is a close match to the C7 carpet. If you are unhappy with your purchase for any reason, simply return it for a full refund.
- Each VetteTray comes standard with (2) Drink Holders and (2) 9 x 12in storage trays
- Perfect for holding cellphones, PDA's CD's, wallets or any other small items
- Required NO modifications to your Corvette
- Does not come loose with hard braking or acceleration
VetteTray Available here: http://www.southerncarparts.com/corv...ay-p-5855.html
Do you get tired of driving down the road and having all of your belongings in the trunk cargo area end up directly behind your head? Southern Car Parts is carrying on our tradition of the trunk partition for the all new 2014-2015 C7 Corvette Stingray. We originally created the Corvette trunk partition for the C5 Corvette and then C6 Corvette. Many Stingray owners were asking for us to create something for their C7 and we did. This trunk partition will easily slide into the cargo area and just rest in place, tightly against the roor latches.
In Stock Here: http://www.southerncarparts.com/corv...on-p-6612.html
The C7 Corvette Stingray trunk parition is designed so that you simply lay the partition down while the removable top is being stored. Best of all, this partition does not require any permanent modifications and can be removed in the matter of seconds. We've designed this parition to sit in place tight and will not move under hard acceleration or under hard breaking.
The C7 Corvette Stingray trunk partition is made out of quality 1/2" MDF board and is carpeted on all sides and on all edges for a nice finished look. This piece really looks like GM included it from the factory.
In Stock Here: http://www.southerncarparts.com/corv...on-p-6612.html
ALSO AVAILABLE C7 CORVETTE TRUNK VETTE TRAY
For the C7 Corvette Stingray. Are you tired of items sliding around the back of your Corvette with little usable or convenient storage space? If so, the Southern Car Parts VetteTray Cargo Organizer is for you.
VetteTray Available here: http://www.southerncarparts.com/corv...ay-p-5855.html
The VetteTray is sturdy yet lightweight weighing in at less than 1 pound. Our registered design is constructed of 2 inch High-Density foam which is factory cut and wrapped in matching black or dark grey carpet for a perfect fit and finish. Keeping weight in mind, the Vette Tray is made from Extruded Polystyrene foam and wrapped in black carpet that is a close match to the C7 carpet. If you are unhappy with your purchase for any reason, simply return it for a full refund.
- Each VetteTray comes standard with (2) Drink Holders and (2) 9 x 12in storage trays
- Perfect for holding cellphones, PDA's CD's, wallets or any other small items
- Required NO modifications to your Corvette
- Does not come loose with hard braking or acceleration
VetteTray Available here: http://www.southerncarparts.com/corv...ay-p-5855.html