When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
To put us different from the rest of others. Besides the huge inventory we have in-house, we also offer our in-house powder coating/machine service exclusively to Clients who purchase wheels from us. We have over 100+ different finishes to choose from. If you're looking to make your ride stand out or have the 1 of 1 wheel like no others. Slide into my DM right now for free One-on-One consultation service.
Forgestar Performance Wheels is probably one of the first few original companies to offer rotary forged wheels.
Their entire line-up is rotary forged, even their modular 2 piece wheels.
With their wide range of diameter, width and offset ranges, the consumer is able to choose a wheel that would perfectly fit their vehicle.
Each set is built to your specifications with an array of standard color options.
Forgestar wheels are certified by SAE JWL VIA and build time can vary between 4-8 weeks.
Give us a call at (562)249-7184 to order your set today!!
Afternoon all! Had to share with the community....
Just got my new Forgestar F14's in from getyourwheels.com and cannot say enough! Went with factory 18/19, the matte gunmetal as opposed to black, and couldn't be happier.
Eric could not have been more helpful in getting me sized up properly and getting the wheels out quickly. (Under 3 weeks!)
Boxed incredibly well, almost too well in fact, with even the lugs individually wrapped.
Very satisfied, and highly recommend both the F14's and getyourwheels.com
Here is a set of Deep Concave 20x9.5 20x11 F14s we built for our customer's S550 GT PP in under 2 weeks!
We'll be wrapping them with some meaty 275/35/20 315/35/20 Michelin PSS, and black TPMS Sensors Attachment 48369020
Installed photos to come!
20x9.5 +25 - 26.4 lbs
20x11 +55 - 26.5 lbs
We also offer multi stage Brushed and Polished finish for an additional cost!
F14s in Matte Antique Bronze (Polished wheel w/ Matte Bronze Clearcoat)
CF10s Brushed with a Lightly Tinited Clearcoat Attachment 48364898 Attachment 48366240 Attachment 48366769
Are there 18/19 options for non z51 cars (c7 stingray)?
Unfortunately they dont have a C7 18/19" setup, other than the Z06 fitment.
Forgestar would need to open up a new mold for a Semi-Concave 19x11" F14 which is pricey.
I already spoke with Forgestar, and if we can get a group buy together for 10 sets, they're willing to cast the new mold. ETA is about 4-6 months if we were to try this option
Last edited by GetYourWheels; 02-13-2015 at 01:50 AM.
Unfortunately they dont have a C7 18/19" setup, other than the Z06 fitment.
Forgestar would need to open up a new mold for a Semi-Concave 19x11" F14 which is pricey.
I already spoke with Forgestar, and if we can get a group buy together for 10 sets, they're willing to cast the new mold. ETA is about 4-6 weeks if we were to try this option
I might be interested in 18/19 in std tire widths in gloss gun metal. What v would be a price for a group buy in those sizes?
I already spoke with Forgestar, and if we can get a group buy together for 10 sets, they're willing to cast the new mold. ETA is about 4-6 weeks if we were to try this option
Please tell me how the F14 setup can be "flush" to the C7 fenders
1. F 56-49 = 7mm + 12.7mm (1/2") = 19.7mm further out toward fender
2. R 79-71 = 8mm + 12.7mm (25.4 /2) = 20.7mm further toward fender
Maybe my 2105 C7 is different from other C7 Corvettes, but the F14 offsets and extra wheel widths are beyond my C7 fender lines and the tires go out even further. I must be missing something because I cannot see the having tires outside the fender line like a "ricer".
Please tell me how the F14 setup can be "flush" to the C7 fenders
1. F 56-49 = 7mm + 12.7mm (1/2") = 19.7mm further out toward fender
2. R 79-71 = 8mm + 12.7mm (25.4 /2) = 20.7mm further toward fender
Maybe my 2105 C7 is different from other C7 Corvettes, but the F14 offsets and extra wheel widths are beyond my C7 fender lines and the tires go out even further. I must be missing something because I cannot see the having tires outside the fender line like a "ricer".
Somebody....
Most customers when upgrading from OEM are looking for a more aggressive/flush fitment than the OEM fitment which sits tucked inside the fenders.
While ~20mm further out may seem like a lot, it actually brings the wheels flush with the outside edge fenders.
This fitment has been tested many many times on the C6/C7 Vettes and its a perfect flush fitment with no rubbing!
Originally Posted by C7cmnthru
I might be interested in 18/19 in std tire widths in gloss gun metal. What v would be a price for a group buy in those sizes?
Group buy price will be about $1550 for an 18/19" set with a powdercoat finished shipped within the US!
Sorry for the mistake, I meant to say 4-6 months, not 4-6 weeks!
Most customers when upgrading from OEM are looking for a more aggressive/flush fitment than the OEM fitment which sits tucked inside the fenders.
While ~20mm further out may seem like a lot, it actually brings the wheels flush with the outside edge fenders.
This fitment has been tested many many times on the C6/C7 Vettes and its a perfect flush fitment with no rubbing!
Group buy price will be about $1550 for an 18/19" set with a powdercoat finished shipped within the US!
Please include me in this group buy for 18/19 set with powdercoat finish for the F14. Make mine gloss gunmetal.
Price of CF5V's.. 19x9.5 fronts, 20x11's rears with the correct offsets for a C7 Z51 Stingray.. preferably powder coated in a color that is the same or extremely close to Carbon Flash Metallic.. thanks.. shipped to Fort Worth, Texas 76123.
"Please tell me how the F14 setup can be "flush" to the C7 fenders?"
Exactly what I am thinking.....either that or I ended up with a narrow body C7 Z51 somehow?
Heres a photo of the Forgestar 19/20" recommended fitment on the Transformers C7
As you can see, while the fitment does bring the wheels/tires out to the very edge of the fender, everything still fits flush and tucks nicely inside the wide C7 fenders.
Originally Posted by corvettekrzy
Please include me in this group buy for 18/19 set with powdercoat finish for the F14. Make mine gloss gunmetal.
If someone wants to start a feeler thread to see if we can get 10 people together for the 18/19" setup, let me know if we get close to 10 people and I can take over!
Originally Posted by Keith N
What is the price for Forgestar F14 C7 Z51 Gunmetal Metallic in 19" & 20" sizes? Local pick up? Any pictures on a C7 Z51 to show fitment? Thanks!
Sending you a PM!
Originally Posted by officermartinez
Price of CF5V's.. 19x9.5 fronts, 20x11's rears with the correct offsets for a C7 Z51 Stingray.. preferably powder coated in a color that is the same or extremely close to Carbon Flash Metallic.. thanks.. shipped to Fort Worth, Texas 76123.
Originally Posted by Rob Willis
Sadly CF5Vs aren't available in correct C7 sizes...
Yes, unfortunately the CF5Vs are only available in 19" Z06 fitment at this time.
For the C6/C7, only Forgestars 19/20" F14 fitment will work
Yes Sir stock C7 Z51 size for me also. My wheel search is finally over. Please Sir PM me Cost and contact information. Those wheels will look nice on my LRG Vette..
02-12-2015, 04:47 PM
*GYW* Forgestar Wheels: Rotary Forged, Custom Finishes, Quick Turnaround!
