Side skirts
#1
Racer
Thread Starter
Side skirts
I need recommendations on side skirts for my Arctic White Stingray.
Where from, and how much?
Prefer the Z06 style, in carbon flash.
Thanks!
Where from, and how much?
Prefer the Z06 style, in carbon flash.
Thanks!
#2
Drifting
Southern Car Parts offers the ones with the accent strip and they are not too expensive. I view the rocker skirt more for protection of the lower rocker area than as an aero aid...
Personally, for the weight saving versus CF, i think CF is a waste of money that is hardly noticable... for some of us, me included, i would worry more about my own waistline, than that of the weight on the car.
Although i do like the "look" of the weave.
Personally, for the weight saving versus CF, i think CF is a waste of money that is hardly noticable... for some of us, me included, i would worry more about my own waistline, than that of the weight on the car.
Although i do like the "look" of the weave.
#3
Pro
http://www.pfyc.com/
preview: http://cimg9.ibsrv.net/gimg/www.corv...29fbb6b5ec.jpg
#5
I went with C7Carbon GTX's. Great service, great pricing.
Call them direct and speak with Andwar, let him know your a CF member.
Call them direct and speak with Andwar, let him know your a CF member.
#6
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,350
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Vendor Directory:
https://www.corvetteforum.com/forums..._directory.php
Many of our Vendors carry them.
Also, I've deleted your thread in the Parts For Sale Section. Forum rules indicate you can only start one thread on a similar topic.
https://www.corvetteforum.com/forums..._directory.php
Many of our Vendors carry them.
Also, I've deleted your thread in the Parts For Sale Section. Forum rules indicate you can only start one thread on a similar topic.
Last edited by Steve Garrett; 10-30-2015 at 03:04 PM.
#7
Racer
Yes very happy with mine bought a rpi designs http://www.rpidesigns.com/shop/ Carbon flash z06 http://www.rpidesigns.com/shop/item.aspx?itemid=4943 12percent off for halloween
Last edited by redvetteman97; 10-30-2015 at 04:37 PM.
#8
Le Mans Master
#9
Drifting
Yes very happy with mine bought a rpi designs http://www.rpidesigns.com/shop/ Carbon flash z06 http://www.rpidesigns.com/shop/item.aspx?itemid=4943 12percent off for halloween
Thanks
#10
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,350
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
^^^ Usually there is no drilling involved-you use the existing OEM screws. They also have double sided tape on them.
The following users liked this post:
Rossi6998 (10-30-2015)
#11
Drifting
ACS-C7 Z06 Inspired Zero7 Rockers
http://www.pfyc.com/
preview: http://cimg9.ibsrv.net/gimg/www.corv...29fbb6b5ec.jpg
http://www.pfyc.com/
preview: http://cimg9.ibsrv.net/gimg/www.corv...29fbb6b5ec.jpg
#13
Melting Slicks
Buy the Z06 style that trims back toward the car near the rear front fender. Had mine on for one week. I have come close to catching my shoe heal twice.
with
without
Notice the added cheapo splitter too. I want a Z51 sway bar for Christmas for my 2015, then I will be very happy. I may stop this madness then.
with
without
Notice the added cheapo splitter too. I want a Z51 sway bar for Christmas for my 2015, then I will be very happy. I may stop this madness then.
Last edited by HAD2HAV2; 10-30-2015 at 10:39 PM.
#14
Drifting
Buy the Z06 style that trims back toward the car near the rear front fender. Had mine on for one week. I have come close to catching my shoe heal twice.
with
without
Notice the added cheapo splitter too. I want a Z51 sway bar for Christmas for my 2015, then I will be very happy. I may stop this madness then.
with
without
Notice the added cheapo splitter too. I want a Z51 sway bar for Christmas for my 2015, then I will be very happy. I may stop this madness then.
#16
Racer
C7 Carbon skirts are great and easy to install using original 3 front screws and 2 rear screws with 2 rolls of 1" wide x 15 ' 3M tape on my Z06 with no drilling
#18
Instructor
I used Lashway Motorsports. Holes needed some minor adjusting with a Dremel tool but was easy and product is of good quality. Use existing holes plus two sided tape. Been on for almost a year and no problems. Solid as a rock.
The following users liked this post:
Glen e (10-31-2015)
#19
http://www.rpidesigns.com/shop/item.aspx?itemid=4943
Alongside the APR Z06 style Carbon fiber rear spoiler and front Z06
stage 2 style splitter
Take advantage of their 15% off sale that ends tonight