Competition & Two-Tone GT Bucket Seat Conversions by TrunkMonkeyParts
#81
Former Vendor
Thread Starter
It's almost car show season, convert your seats with Trunk Monkey Parts for that extra "WOW" factor!
CORVETTE C7 GM COMPETITION SEAT-BACK CONVERSION (BOTH SEATS)
CORVETTE C7 GM COMPETITION SEAT-BACK CONVERSION (BOTH SEATS)
Last edited by subchev; 04-10-2017 at 12:18 PM.
#82
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
Who has had a professional Auto Trim Upholstery install the Competition Seat conversion? I am looking to find out what you were charged and how much it cost for them to do it? The local places won't quote you without have the kit in front of them to review what it entails and how many hours it would take. Several of the top shops in Michigan I contacted did say their hourly rate is anywhere from $80-$100 hours but no one would like to pre-purchase a kit and then pay $800-$1000 which is why I am trying to get an ideal of what others have paid for installation and how many hours did the professional take to install. Thanks in advance for providing this helpful information that's needed so I can have an ballpark of what to expect!
#83
Former Vendor
Thread Starter
http://www.trunkmonkeyparts.com/How-...mpetition-Seat
#84
Melting Slicks
Member Since: Sep 2016
Location: Northville Michigan
Posts: 3,074
Received 1,195 Likes
on
663 Posts
C7 of the Year - Unmodified Finalist 2021
I emailed and provided the entire DIY from your sight but they have said it provides a general idea but it's not like reviewing the kit. The concern is under quoting based on looking at pictures of a DIY. Do you have a picture that shows it component of the kit how it's sent out? I think that might be helpful! Several people here in Michigan want to get the kit but not without knowing install cost. Also, do you have contact with those that paid to get install and I think getting general pricing for installation from a number of people would be helpful to know what to expect.
I suppose you could probably show/send them this and they would probably be able to give you a quote
http://www.trunkmonkeyparts.com/How-...mpetition-Seat
http://www.trunkmonkeyparts.com/How-...mpetition-Seat
#85
Drifting
So $2K for new covers?? wow. Can you break a million dollar bill??
#86
Former Vendor
Thread Starter
This is what comes in the kit:
2 seat covers (your choice of color and trim level)
2 seat back panels (gloss black)
2 carbon fiber trim bezels
2 seat back heaters
2 seat back pads
2 lower air bag brackets
4 side covers
8 bolts
and u full DIY walkthrough available on the product page
Last edited by subchev; 04-10-2017 at 01:49 PM.
#87
Pro
Who has had a professional Auto Trim Upholstery install the Competition Seat conversion? I am looking to find out what you were charged and how much it cost for them to do it? The local places won't quote you without have the kit in front of them to review what it entails and how many hours it would take. Several of the top shops in Michigan I contacted did say their hourly rate is anywhere from $80-$100 hours but no one would like to pre-purchase a kit and then pay $800-$1000 which is why I am trying to get an ideal of what others have paid for installation and how many hours did the professional take to install. Thanks in advance for providing this helpful information that's needed so I can have an ballpark of what to expect!
Last edited by RipcordZ51; 04-10-2017 at 02:22 PM. Reason: Adding hours
#89
Former Vendor
Thread Starter
Check out how you can get 5% off your order during the month of May!!
5% Off Storewide Sale ~ Guide Dogs For The Blind Donation
5% Off Storewide Sale ~ Guide Dogs For The Blind Donation
#90
Former Vendor
Thread Starter
Our store hours are 8AM-5PM PST ALL WEEK LONG!
Thanks for all the orders!
Don't hesitate to give us a call to verify a part
or ask for a part that you're unable to find on our website,
our friendly and knowledgeable sales representative is ready and willing to take your call!!
Our store hours are 8AM-5PM PST ALL WEEK LONG!
please leave a voicemail and we will get back to you as soon as we can, thank you!
Don't hesitate to give us a call to verify a part
or ask for a part that you're unable to find on our website,
our friendly and knowledgeable sales representative is ready and willing to take your call!!
Our store hours are 8AM-5PM PST ALL WEEK LONG!
please leave a voicemail and we will get back to you as soon as we can, thank you!
The following users liked this post:
EmbraceNext (06-01-2017)
#92
Racer
Can seat heaters and cooling be enabled on cars that did not have them from the factory? Put another way, is the wiring intact to support adding the seat heaters/coolers and switches?
#93
Former Vendor
Thread Starter
Yes, Tension Blue will definitely be available as soon as we get them in stock. There's been some issues with the part numbers, and we're working with GM to get a full set here since most people are going to want to swap their bottoms also if they're adding the blue.
#94
Which 2017 parts are you after?
Yes, Tension Blue will definitely be available as soon as we get them in stock. There's been some issues with the part numbers, and we're working with GM to get a full set here since most people are going to want to swap their bottoms also if they're adding the blue.
Yes, Tension Blue will definitely be available as soon as we get them in stock. There's been some issues with the part numbers, and we're working with GM to get a full set here since most people are going to want to swap their bottoms also if they're adding the blue.
#95
Former Vendor
Thread Starter
There's already some bids going on our donated $250 gift card with all proceeds going to st. jude,
Join in on the action before it ends on 6-26!
Use this link here :
https://www.corvetteforum.com/forums...post1594973988
Join in on the action before it ends on 6-26!
Use this link here :
https://www.corvetteforum.com/forums...post1594973988
Last edited by subchev; 06-19-2017 at 07:06 PM.
#96
Former Vendor
Thread Starter
New Color Choice for Comp Seat
We have added a new option to our Competition Seat Conversion Kit,
TENSION BLUE!!
As seen in the Grand Sport Collector's Edition!
CORVETTE C7 GM COMPETITION SEAT-BACK CONVERSION (BOTH SEATS) (COMP-SEAT-KIT)
This interior option includes the required seat bottom covers that will install on your GT seat bottoms to match the upper seat conversion.
This kit comes as shown here with tension blue outer, and black suede inner portions:
TENSION BLUE!!
As seen in the Grand Sport Collector's Edition!
CORVETTE C7 GM COMPETITION SEAT-BACK CONVERSION (BOTH SEATS) (COMP-SEAT-KIT)
This interior option includes the required seat bottom covers that will install on your GT seat bottoms to match the upper seat conversion.
This kit comes as shown here with tension blue outer, and black suede inner portions:
#97
I'm Batman..
Pro Mechanic
Member Since: Apr 2014
Location: Lehigh Acres FL
Posts: 6,130
Received 908 Likes
on
561 Posts
Tech Contributor
We have added a new option to our Competition Seat Conversion Kit,
TENSION BLUE!!
As seen in the Grand Sport Collector's Edition!
CORVETTE C7 GM COMPETITION SEAT-BACK CONVERSION (BOTH SEATS) (COMP-SEAT-KIT)
This interior option includes the required seat bottom covers that will install on your GT seat bottoms to match the upper seat conversion.
This kit comes as shown here with tension blue outer, and black suede inner portions:
TENSION BLUE!!
As seen in the Grand Sport Collector's Edition!
CORVETTE C7 GM COMPETITION SEAT-BACK CONVERSION (BOTH SEATS) (COMP-SEAT-KIT)
This interior option includes the required seat bottom covers that will install on your GT seat bottoms to match the upper seat conversion.
This kit comes as shown here with tension blue outer, and black suede inner portions:
The following users liked this post:
subchev (09-05-2017)
#98
Regarding the Tension Blue seats, the back seat comes complete, correct? Nothing to put together?
Since the bottom of the tension blue competition seats is divided into 4 sections, and the standard seats are 3, how does that work?
Since the bottom of the tension blue competition seats is divided into 4 sections, and the standard seats are 3, how does that work?
#99
Former Vendor
Thread Starter
The seat covers included are for GT seats. 3 panels.
Last edited by subchev; 09-05-2017 at 01:46 PM.
#100
Former Vendor
Thread Starter
Big savings with our Labor Day Sale!
View the details here:
https://www.corvetteforum.com/forums...e-for-you.html
View the details here:
https://www.corvetteforum.com/forums...e-for-you.html