Competition & Two-Tone GT Bucket Seat Conversions by TrunkMonkeyParts
05-22-2016, 02:33 PM
#41
Former Vendor
Thread Starter
Nice weather is just around the corner if it's not already at your doorstep, and I know for most of you (like me) that means it's time for summer projects! What a better one to tackle on a nice sunny day than swapping out those base GT seats for some factory competition seats! Everything that is needed is already in the kit, just choose which material you want and voila! 
06-10-2016, 10:42 AM
#42
Former Vendor
Thread Starter
Feel free to post some before & after pictures of your own conversion for the rest of us to enjoy!
Corvette C7 Competition Seat Conversion
Corvette C7 Competition Seat Conversion
Last edited by subchev; 03-06-2017 at 10:43 AM.
The following users liked this post:
subchev (06-15-2016)
06-12-2016, 07:48 PM
#44
Team Owner
Member Since: Apr 2001
Location: S.W. Ohio. . . . . . NRA Life Member
Posts: 54,199
Received 173 Likes
on
107 Posts
second set of questions:
with the conversion from std seats to the Competition seats... can the seat backs be done.. but not the seat bottoms? (I am assuming the conversion kit does both the backs & bottoms)
.
with the conversion from std seats to the Competition seats... can the seat backs be done.. but not the seat bottoms? (I am assuming the conversion kit does both the backs & bottoms)
.
Last edited by Mike Mercury; 06-12-2016 at 09:10 PM.
06-12-2016, 07:53 PM
#45
Burning Brakes
The parts being sold and the prices are just the backs. It would cost much more (foam + cover + heater) to do the bottom.
Edit: Never mind. I see you are not talking about competition seats.
Edit: Never mind. I see you are not talking about competition seats.
Last edited by dmhines; 06-12-2016 at 07:55 PM.
The following users liked this post:
subchev (06-13-2016)
The following users liked this post:
subchev (06-13-2016)
06-15-2016, 06:33 PM
#49
Former Vendor
Thread Starter
Last edited by subchev; 07-14-2016 at 02:19 PM.
07-14-2016, 02:20 PM
#50
Former Vendor
Thread Starter
Thanks for all the orders!! 
Trunk Monkey Parts | Your Source for Corvette Parts & Accessories
Trunk Monkey Parts | Your Source for Corvette Parts & Accessories
Last edited by subchev; 07-14-2016 at 02:52 PM.
08-29-2016, 07:03 PM
#51
Former Vendor
Thread Starter
If you have any questions at all please ask us here on the forum, in a PM, or call in and talk to one of our parts experts!!
09-03-2016, 12:28 PM
#52
Instructor
I know you can select the heated seats does this retain the vented "ac" seats functionality as well if you do the conversion?
Last edited by NateDieselF4i; 09-03-2016 at 12:28 PM.
09-06-2016, 12:07 PM
#53
Former Vendor
Thread Starter
11-11-2016, 12:10 PM
#54
Guess the parts I found!
First, thank you Trunk Monkey for being easy to do business with! Ordered my Comp seat conversion kit and it's on its way 
In preparation for the job, I took my seats out this morning. Have to say, it was not easy! Hardest part was removing the stinking wire holder - you know, the barbed push pin kind - looks like it's a one-time use 'cause I just about destroyed both of them.
Anyway, here's the deal: Once I undid the bolts and removed the seats, look what I found - the seats were screwed down ON TOP of these parts! The dime was under the drivers seat (helps with the next and last payment!) and the assorted bolts and clips were under the passenger seat bolt. Either my car is about to fall apart or someone else with a 2014 Z51 M7 is missing a bunch of parts
Anyone care to guess where they belong?
In preparation for the job, I took my seats out this morning. Have to say, it was not easy! Hardest part was removing the stinking wire holder - you know, the barbed push pin kind - looks like it's a one-time use 'cause I just about destroyed both of them.
Anyway, here's the deal: Once I undid the bolts and removed the seats, look what I found - the seats were screwed down ON TOP of these parts! The dime was under the drivers seat (helps with the next and last payment!) and the assorted bolts and clips were under the passenger seat bolt. Either my car is about to fall apart or someone else with a 2014 Z51 M7 is missing a bunch of parts
Anyone care to guess where they belong?
The following users liked this post:
subchev (11-11-2016)
12-11-2016, 12:23 PM
#56
When I ordered my conversion (the kit is for the seat backs) I also had to order a driver side seat bottom as "someone" had poked a hole in it. Trunk Monkey was able to send me a new one so my guess is you can order seat bottoms as well.
The following users liked this post:
KGS365 (12-11-2016)
12-11-2016, 02:07 PM
#57
Burning Brakes
If I do this to my standard 1LT seats, will I get the adjustable side bolsters on either option (GT covers or Competition Seat Back replacement)? I assume I'll have to do the seat heater delete seeing my car isn't wired for that.
Last edited by Mister Big; 12-11-2016 at 03:22 PM.
12-12-2016, 04:13 PM
#58
Former Vendor
Thread Starter
The kit doesn't include the seat bottoms, but let us know what you are wanting and we can get those for you. No extra shipping costs, we will put it all in the same box
12-12-2016, 04:18 PM
#59
Former Vendor
Thread Starter
this conversion kit does not add any abilities to your current seat, simply replaces parts such as seat-back, seat belt harness bezels, foam, leather, airbag brackets, and side covers (not heaters for you obviously)
The following users liked this post:
Mister Big (12-12-2016)
