Remove chrome Stingray badge?
The following users liked this post:
DeStreGa5 (09-01-2016)
The following users liked this post:
woodsguy (09-25-2016)
05-07-2016, 08:52 AM
#27
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,590
Received 19,188 Likes
on
13,911 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
There are no holes to worry about. Dental floss or heavy fishing line will do the trick. You may want to apply some gentle heat to the area (such as with a blow dryer) before the operation; doing so will soften the adhesive and make it easier to remove all of it. WD40 works well in removing lingering adhesive residue.
Congrats on the new ride - sure is a beauty.
05-07-2016, 09:59 AM
#28
Burning Brakes
You guys inspired me. I removed the Stingray badges on the fenders and the Corvette script on the rear bumper cover. It looks so much cleaner without them. The V shaped flags are all you need to know it's a Corvette.
05-07-2016, 12:57 PM
#29
Race Director
05-07-2016, 01:09 PM
#30
Burning Brakes
05-08-2016, 02:59 AM
#34
Burning Brakes
I took the lettering off as well. Looks really good.
And to answer your smartass question: Because there is an indentation under the corvette emblems.
The following users liked this post:
Patches (05-08-2016)
I think the Carbon Flash package goes good on my Shark Gray.
05-08-2016, 01:32 PM
#36
05-08-2016, 03:04 PM
#37
Team Owner
Yep, bought the car used and they were like that. PO had not had the dealer straighten them. My lift is currently occupied with my C5 S/C project so I haven't had it up in the air to fix this. I tried before with my huge cheater bar and the tips barely budged. Went out and tried it again just now with considerably more force and they're within 1/32" to each other now. I will redo them when the lift is freed up. 
05-08-2016, 03:21 PM
#38
Drifting
There are no holes to worry about. Dental floss or heavy fishing line will do the trick. You may want to apply some gentle heat to the area (such as with a blow dryer) before the operation; doing so will soften the adhesive and make it easier to remove all of it. WD40 works well in removing lingering adhesive residue.
