Deity Motorsports and Signature Wheel introduction and Group Buy!
06-24-2017, 08:49 PM
#182
The following users liked this post:
Deity.Motorsports (06-24-2017)
06-27-2017, 02:57 AM
#185
06-27-2017, 05:08 PM
#188
Intermediate
That's my baby! Thanks Khoa for a great product and exceptional customer service from start to finish.
LG Motorsports cooling package installed by KaizenSpeed in Kennewick, WA. Along with some performance upgrades. It is interesting that on 3 consecutive baseline dyno pulls the RWHP dropped from 537 to high 400's to 437 in a matter of only a few minutes. Post mods it Made 717 RWHP and 700 ft/lbs torque and ten consecutive dyno pulls were within 10 HP of initial.
I'll let you know how it does on the track. Hope to get it out to Oregon Raceway Park in early July.
LG Motorsports cooling package installed by KaizenSpeed in Kennewick, WA. Along with some performance upgrades. It is interesting that on 3 consecutive baseline dyno pulls the RWHP dropped from 537 to high 400's to 437 in a matter of only a few minutes. Post mods it Made 717 RWHP and 700 ft/lbs torque and ten consecutive dyno pulls were within 10 HP of initial.
I'll let you know how it does on the track. Hope to get it out to Oregon Raceway Park in early July.
The following 2 users liked this post by ledfootlon:
Deity.Motorsports (06-27-2017),
ya3coub (06-28-2017)
06-27-2017, 09:19 PM
#189
Melting Slicks
ledfoot, the whole car looks awesome. What are your wheel sizes and offsets?
It seems like you guys in Tricities are more active with cool car stuff than up here in Spokane. Have fun at ORP. One of these days I need to get down there.
It seems like you guys in Tricities are more active with cool car stuff than up here in Spokane. Have fun at ORP. One of these days I need to get down there.
06-28-2017, 03:20 AM
#190
That's my baby! Thanks Khoa for a great product and exceptional customer service from start to finish.
LG Motorsports cooling package installed by KaizenSpeed in Kennewick, WA. Along with some performance upgrades. It is interesting that on 3 consecutive baseline dyno pulls the RWHP dropped from 537 to high 400's to 437 in a matter of only a few minutes. Post mods it Made 717 RWHP and 700 ft/lbs torque and ten consecutive dyno pulls were within 10 HP of initial.
I'll let you know how it does on the track. Hope to get it out to Oregon Raceway Park in early July.
LG Motorsports cooling package installed by KaizenSpeed in Kennewick, WA. Along with some performance upgrades. It is interesting that on 3 consecutive baseline dyno pulls the RWHP dropped from 537 to high 400's to 437 in a matter of only a few minutes. Post mods it Made 717 RWHP and 700 ft/lbs torque and ten consecutive dyno pulls were within 10 HP of initial.
I'll let you know how it does on the track. Hope to get it out to Oregon Raceway Park in early July.
.After your post now im more i trested in having it for my car I will contact them they can expand their market if they did something for the lt1 vetts
The wheels looks amazing another photo will show them more
06-28-2017, 02:32 PM
#191
Intermediate
The wheel sizes are 18 x 11 front and 18 x 13 rear. You can get Hoosier R7's to fit those sizes Not sure the offset but you can ask Khoa. Tri-Cities has an excellent speed shop that specializes in Vettes and Camaros. KaizenSpeed. They have done a lot of cars and they are awesome. They actually have an arrangement where they will do an 800 HP package on a new vehicle from the dealer and maintain factory warranty coverage.
06-28-2017, 02:47 PM
#192
Melting Slicks
I heard about KaizenSpeed from someone else on the forum. I can't believe they can maintain warranty. I will have to check that out. I have heard on the Camaro forums the dealer in Tri-Cities is better to work with for warranty repairs.
The following users liked this post:
Deity.Motorsports (06-29-2017)
07-01-2017, 02:35 AM
#196
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
New Pictures and sale threads up. Please go in and post all of your favorite installed pics
https://www.corvetteforum.com/forums...post1595055661
https://www.corvetteforum.com/forums...le-thread.html
https://www.corvetteforum.com/forums...post1595055661
https://www.corvetteforum.com/forums...le-thread.html
01-14-2018, 09:45 AM
#197
Signature wheels
02-01-2018, 09:01 AM
#199
Le Mans Master
Hi, I really like these wheels but am a bit concerned about the offsets. Can they be made with OEM Z07 wheel specs? Looking at the white C7Z, they seem to stick out a bit which I don't care for (nor do I want rock chip on a black car!). Can they be made so they do not rub the inside fender or stick out running OEM Cup 2 tires? Thank you! 
02-01-2018, 09:06 AM
#200
Former Vendor
Thread Starter
Member Since: Sep 2016
Location: Westminster California
Posts: 2,557
Received 329 Likes
on
225 Posts
Hi, I really like these wheels but am a bit concerned about the offsets. Can they be made with OEM Z07 wheel specs? Looking at the white C7Z, they seem to stick out a bit which I don't care for (nor do I want rock chip on a black car!). Can they be made so they do not rub the inside fender or stick out running OEM Cup 2 tires? Thank you!
In all honesty, if you have the side skirts; you won’t see rock chips.
White car is mine. I tested out 325 30 19 just to prove that C7Z can fit them, 20k miles with those 325 front. Just testing the limit for my customers.
Let me know sir.
Khoa
